Page 26 / 93
Scroll up to view Page 21 - 25
25
Please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop:
Input ‘cmd’, then click ‘OK’
Page 27 / 93
26
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address followed
by ‘Default Gateway’ (In this example, the IP address of router is
192.168.2.1,
please note that this value may be different.
)
If you tried the instructions listed above and still can not find the IP address of
this broadband router / you forget the password, please jump to chapter xx-xx
to reset the broadband router.
NOTE: If the IP address of Gateway is not displayed, or the address followed
by ‘IP Address’ begins with ‘169’, please recheck network connection
between your computer and router, and / or go to the beginning of this
chapter, to recheck every step of network setup procedure.
Page 28 / 93
27
2-4 Using ‘Quick Setup’
This broadband router provides a ‘Quick Setup’ menu, and you can setup
basic parameters of this broadband router. Please follow the following
instructions to use ‘Quick Setup’ menu:
1.
Click ‘Quick Setup’ after logged in.
Page 29 / 93
28
2. This page introduces the steps you’ll go through during Quick Setup, click
‘Next’ to start setup procedure.
3. Check ‘Enable NTP client update’ box so this router will setup its internal
clock automatically by synchronizing with time server. Please select the time
zone of your residence from ‘Time Zone Select’ dropdown list, and then select
a nearest time server from ‘NTP server’ dropdown menu. When you finish,
click ‘Next’ to continue.
Page 30 / 93
29
4. Please input the IP address and Subnet Mask of the LAN interface here.
You can use default setting and just click ‘Next’ to continue.
5. Please select the WAN connection type here from ‘WAN Access Type’
dropdown menu. Every connection type requires different settings. Detailed
instructions will be given below.
19216811.live