50
The descriptions of every setup item are listed below:
Item Name
Description
IP Address
Input the IP address assigned by your Internet
Service Provider.
Subnet Mask
Input the subnet mask assigned by your Internet
Service Provider.
Server IP Address
Input the IP address of PPTP connection server.
User Name
Input the user name of PPTP connection server.
Password
Input the password of PPTP connection server.
MTU Size
Please input the MTU value of your network
connection here (from 1400 to 1492). If you don’t
know which value you should use, you can use
default value.
Obtain DNS
Automatically
Most of service provider will provide DNS IP
address via DHCP. Select this option and this
router will obtain DNS server’s IP address from
your service provider automatically.
Set DNS Manually /
DNS 1 - 3
Select this and input the DNS (Domain Name
System) server’s IP address assigned by your
Internet Service Provider. You can input up to 3 IP
addresses of DNS server, and do not input
hostname here. At least one DNS server is
required.
Clone MAC Address
If your Internet Service Provider only permits
connection from specific MAC address, type the
MAC address here.
Enable uPNP
Check this box if you wish to enable uPNP
(Universal Plug-and-Play) function on WAN port.
Enable Web Server
Access on WAN
If you wish to connect to the web configuration
interface from Internet, please check this box.
Please note that if you didn’t set a strong
password to protect this router, the settings of
this router may be modified by unauthorized
person who comes from Internet. Only check
this box when it’s required.
Next
Save changes you made in this page.
Cancel
Discard changes you made in this page.