Page 21 / 298
Scroll up to view Page 16 - 20
igor2930 Series User’s Guide
13
1.4 ISDN Phone Adapter Installation
Such information is provided for Vigor2930 S models (e.g., Vigor2930VS).
ISDN S0 1 is always fixed to connect ISDN phone. However, ISDN S0 2 is configurable as
ISDN line or ISDN phone. When the user configures ISDN S0 2 as ISDN phone in
VoIP>>
Phone Settings
, the
orange
LED will light on to indicate
ISDN2-S0
mode is selected. And
by using ISDN phone adapters (coming from the router package), the user can connect
several phones (the maximum is six) to Vigor2930VS for communication. Refer to the
following figure for reference.
However, if the user configures ISDN S0 2 as ISDN line in
VoIP>> Phone Settings
, the
green
LED will light on to indicate ISDN2-TE mode is selected. Then, the port is specified
for ISDN line only. Refer to the following figure for reference.
Page 22 / 298
Vigor2930 Series User’s Guide
14
This page is left blank.
Page 23 / 298
igor2930 Series User’s Guide
15
2
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
B
B
a
a
s
s
i
i
c
c
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
For use the router properly, it is necessary for you to change the password of web
configuration for security and adjust primary basic settings.
This chapter explains how to setup a password for an administrator and how to adjust basic
settings for accessing Internet successfully. Be aware that only the administrator can change
the router configuration.
2.1 Changing Password
To change the password for this device, you have to access into the web browse with default
password first.
1.
Make sure your computer connects to the router correctly.
Notice:
You may either simply set up your computer to get IP
dynamically from the router or set up the IP address of the computer to be
the same subnet as
.
For the detailed information, please refer to the later section - Trouble
Shooting of this guide.
2.
Open a web browser on your PC and type
A pop-up window will
open to ask for username and password. Please type default values (both username and
password are Null) on the window for the first time accessing and click
OK
for next
screen.
3.
Now, the
Main Screen
will pop up.
Page 24 / 298
Vigor2930 Series User’s Guide
16
Note:
The home page will change slightly in accordance with the router you have.
4.
Go to
System
Maintenance
page and choose
Administrator Password
.
5.
Enter the login password (the default is blank) on the field of
Old Password
. Type a
new one in the field of
New Password
and retype it on the field of
Retype New
Password
. Then click
OK
to continue.
6.
Now, the password has been changed. Next time, use the new password to access the
Web Configurator for this router.
Page 25 / 298
igor2930 Series User’s Guide
17
2.2 Quick Start Wizard
If your router can be under an environment with high speed NAT, the configuration provide
here can help you to deploy and use the router quickly. The first screen of
Quick Start
Wizard
is entering login password. After typing the password, please click
Next
.
On the next page as shown below, please select the WAN interface that you use. Choose
Auto negotiation
as the physical type for your router. Then click
Next
for next step.
On the next page as shown below, please select the appropriate Internet access type
according to the information from your ISP. For example, you should select PPPoE mode if
the ISP provides you PPPoE interface. Then click
Next
for next step.
19216811.live