Page 11 / 298 Scroll up to view Page 6 - 10
igor2930 Series User’s Guide
3
1.2.1 For Vigor2930
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
CSM
On
The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from
CSM >> IM/P2P Profile
).
CPA (Content Portal Authority)
On
The Web Content Filter is active. (It is enabled
from
CSM >> Web Content Filter Profile
).
On
The WAN1 or WAN2 port is connected.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
WAN(1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 12 / 298
Vigor2930 Series User’s Guide
4
1.2.2 For Vigor2930n
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
CSM
On
The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from
CSM >> IM/P2P Profile
).
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On
The WAN1 or WAN2 port is connected.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Interface
Description
Factory Reset
Press "Factory Reset" button once to make network connection through WPS.
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
WAN (1/2)
Connecters for remote networked devices.
Page 13 / 298
igor2930 Series User’s Guide
5
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter..
ON/OFF
Power Switch.
Page 14 / 298
Vigor2930 Series User’s Guide
6
1.2.3 For Vigor2930Vn
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
CSM
On
The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from
CSM >> IM/P2P Profile
).
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On
The WAN1 or WAN2 port is connected.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Interface
Description
Factory Reset
Press "Factory Reset" button once to make network connection through WPS.
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
WAN (1/2)
Connecters for remote networked devices.
Page 15 / 298
igor2930 Series User’s Guide
7
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top