1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2930n
    5. /
  5. 4
Page 16 / 298 Scroll up to view Page 11 - 15
Vigor2930 Series User’s Guide
8
1.2.4 For Vigor2930VS
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
CSM
On
The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from
CSM >> IM/P2P Profile
).
CPA (Content Portal Authority)
On
The Web Content Filter is active. (It is enabled
from
CSM >> Web Content Filter Profile
)
On
The WAN1 or WAN2 port is connected.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while transmitting data.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Left LED
(Orange)
Blinking
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On
A phone has been connected. If not, green LED will
be off.
ISDN S0 1
Right LED
(Green)
Blinking
An ISDN phone is off-hook or a phone call comes.
On
ISDN NT (ISDN S0 intern) mode is active
configured from
VoIP>>Phone Settings
and an
ISDN phone adapter is connected.
Blinking
ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings
is active and an ISDN
phone adapter is not connected.
Left LED
(Orange)
Off
It means ISDN TE mode is active which is
configured from
VoIP>>Phone Settings
.
On
A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
ISDN S0 2
Right LED
(Green)
Blinking
In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 1/2
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Page 17 / 298
igor2930 Series User’s Guide
9
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
ISDN S0 1
Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any
other device to such port or connect ISDN line, otherwise the router might be
damaged.
ISDN S0 2
Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to
section 2.2 for more details.
WAN (1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 18 / 298
Vigor2930 Series User’s Guide
10
1.2.5 For Vigor2930VSn
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while deleting an attack.
CSM
On
The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from
CSM >> IM/P2P Profile
).
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes through.
It will blink fast when WPS is working and it will
return to normal condition after two minutes.
(You need to setup WPS within 2 minutes.)
On
The WAN1 or WAN2 port is connected.
WAN1/2
Blinking
It will blink while transmitting data.
On
The router is managed (handled) by Telnet.
MGMT
Blinking
It will blink while being managed by IE browser.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Left LED
(Orange)
Blinking
ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On
A phone has been connected. If not, green LED will
be off.
ISDN S0 1
Right LED
(Green)
Blinking
An ISDN phone is off-hook or a phone call comes.
On
ISDN NT (ISDN S0 intern) mode is active
configured from
VoIP>>Phone Settings
and an
ISDN phone adapter is connected.
Blinking
ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings
is active and an ISDN
phone adapter is not connected.
Left LED
(Orange)
Off
It means ISDN TE mode is active which is
configured from
VoIP>>Phone Settings
.
On
A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
ISDN S0 2
Right LED
(Green)
Blinking
In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
WAN 1/2
Right LED
On
The port is connected with 100Mbps.
Page 19 / 298
igor2930 Series User’s Guide
11
(Green)
Off
The port is disconnected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 1/2/3/4
Right LED
(Green)
Off
The port is disconnected with 10Mbps.
Interface
Description
Factory Reset
Press "Factory Reset" button once to make network connection through WPS
Press "Factory Reset" button twice to enable or disable WLAN function.
Press "Factory Reset" button for 5 seconds to do the factory reset.
Restore the default settings. Usage: Turn on the router (ACT LED is blinking).
Press the hole and keep for more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button. Then the router will restart
with the factory default configuration.
Restart
Restart the router forcefully.
Phone (1/2)
Connecters for PSTN phones.
ISDN S0 1
Connecter for ISDN phone(s) only via ISDN phone adapter. Do not connect any
other device to such port or connect ISDN line, otherwise the router might be
damaged.
ISDN S0 2
Connecter for ISDN line or ISDN phone adapter in particular condition. Refer to
section 2.2 for more details.
WAN (1/2)
Connecters for remote networked devices.
LAN (1-4)
Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 20 / 298
Vigor2930 Series User’s Guide
12
1.3 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
1.
Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router
with Ethernet cable (RJ-45). The
WAN1/WAN2
LED (Left or Right) will light up
according to the speed (100 or 10) of the device that it connected.
2.
Connect one end of an Ethernet cable (RJ-45) to one of the
LAN
ports of the router and
the other end of the cable (RJ-45) into the Ethernet port on your computer. The
LAN
LED (Left or Right) will light up according to the speed (100 or 10) of the device that it
connected.
3.
Connect the telephone sets with phone lines (for using VoIP function). For the model
without phone ports, skip this step.
4.
Connect one end of the power adapter to the router’s power port on the rear panel, and
the other side into a wall outlet.
5.
Power on the device by pressing down the power switch on the rear panel.
6.
The system starts to initiate. After completing the system test, the
ACT
LED will light
up and start blinking.
(For the detailed information of LED status, please refer to section 1.2.)
Caution
: Each of the Phone ports can be connected to an analog phone only. Do not
connect the phone ports to the telephone wall jack. Such connection might damage
your router.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top