1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2930n
    5. /
  5. 9
Page 41 / 298 Scroll up to view Page 36 - 40
igor2930 Series User’s Guide
33
Details Page for PPPoE
To use
PPPoE
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPPoE
mode for WAN2. The following web page will be shown.
PPPoE Client Mode
Click
Enable
for activating this function. If you click
Disable
, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check
Always
On
.
Username
– Type in the username provided by ISP in this field.
Password
– Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of time
schedule for your request. All the schedules can be set previously
in
Application >> Schedule
web page and you can use the number
that you have set in that web page.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click
ISDN
>
Dialing to
a Single ISP
to create the backup profile.
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for
i
model only.
WAN Connection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Page 42 / 298
Vigor2930 Series User’s Guide
34
Detection
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
MTU
Mean maximum transmission unit of one packet. The default
value is 1442.
PPP/MP Setup
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action. This setting is
active only when the
Active on demand
option for Active Mode is
selected in
WAN>> General Setup
page.
IP Address
Assignment Method
(IPCP)
Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service
to always assign you the same IP address whenever you request.
In this case, you can fill in this IP address in the Fixed IP field.
Please contact your ISP before you want to use this function.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC Address
or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address –
Type the MAC address for the router
manually.
Page 43 / 298
igor2930 Series User’s Guide
35
After finishing all the settings here, please click
OK
to activate them.
Details Page for Static or Dynamic IP
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP
address to the WAN interface.
To use
Static or Dynamic IP
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
Static or Dynamic IP
mode for WAN2.
The following web page will be shown.
Static or Dynamic IP
(DHCP Client)
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
ISDN Dial Backup
Setup
This setting is available for the routers supporting ISDN function
only. Before utilizing the ISDN dial backup feature, you must
create a dial backup profile first. Please click
Internet Access
Setup
>
Dialing to a Single ISP
to enter the backup profile.
None
- Disable the backup function.
Packet Trigger -
The backup line is not on until a packet from a
local host triggers the router to establish a connection.
This setting is available for
i
model only.
Keep WAN
Connection
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check
Enable PING to keep alive
box to activate this function.
Page 44 / 298
Vigor2930 Series User’s Guide
36
PING to the IP
- If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
PING Interval
- Enter the interval for the system to execute the
PING operation.
RIP Protocol
Routing Information Protocol is abbreviated as RIP (RFC1058)
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
MTU
Mean maximum transmission unit of one packet. The default
value is 1442.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically if you want to use
Dynamic IP
mode.
Router Name
:
Type in the router name provided by ISP.
Domain Name
:
Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some
data if you want to use
Static IP
mode.
IP Address
:
Type the IP address.
Page 45 / 298
igor2930 Series User’s Guide
37
Subnet Mask
:
Type the subnet mask.
Gateway IP Address
:
Type the gateway IP address.
Default MAC Address
: Click this radio button to use default MAC
address for the router.
Specify a MAC Address
: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
DNS Server IP
Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
Details Page for PPTP/L2TP
To use
PPTP
as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPTP
mode for WAN2. The following web page will be shown.
PPTP/L2TP Client
Mode
Enable PPTP / Enable L2TP
- Click
Enable PPTP / Enable
L2TP
to enable a PPTP/L2TP client to establish a tunnel to a
DSL modem on the WAN interface.
Server Address –
Type the IP address for PPTP or L2TP server.
Specify Gateway IP Address
- Specify the gateway for the
PPTP/L2TP server.
ISP Access Setup
Username
-Type in the username provided by ISP in this field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of
time schedule for your request. All the schedules can be set
previously in
Application – Schedule
web page and you can use
the number that you have set in that web page.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top