1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2930n
    5. /
  5. 47
Page 231 / 298 Scroll up to view Page 226 - 230
igor2930 Series User’s Guide
223
3.14.4 Online User Status
If you have finished the configuration of SSL Web Proxy (server), users can find out
corresponding settings when they access into Draytek SSL VPN portal interface.
Next, users can open
SSL VPN>> Online Status
to view logging status of SSL VPN.
Active User
Display current user who visit SSL VPN server.
Host IP
Display the IP address for the host.
Time out
Display the time remaining for logging out.
Action
You can click
Drop
to drop certain login user from the
router's SSL Portal UI.
3.15 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System,
Firmware Upgrade.
Page 232 / 298
Vigor2930 Series User’s Guide
224
Below shows the menu items for System Maintenance.
3.15.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
System
---
CPU Usage
Display current usage of CPU.
Total Memory
Display the total memory of your hard disk.
Memory Usage
Display current usage of memory.
LAN
---
MAC Address
Display the MAC address of the LAN Interface.
1
st
IP Address
Display the IP address of the LAN interface.
Page 233 / 298
igor2930 Series User’s Guide
225
1
st
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
DNS
Display the assigned IP address of the primary DNS.
WAN1/WAN2
---
Link Status
Display the connection status.
MAC Address
Display the MAC address of the WAN Interface.
Connection
Display the connection mode used currently.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
Wireless LAN
---
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi
card. This also helps to provide availability of some
features that are bound with some WLAN miniPCi card.
Page 234 / 298
Vigor2930 Series User’s Guide
226
3.15.2 TR-069 Setting
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
URL, username and password for the VigorACS server that such device will be connected.
However URL, username and password under CPE client are fixed that users cannot change
it.
The default CPE username and password are "vigor" and "password". You will
need it when you configure VigorACS server.
ACS Server
Such data must be typed according to the ACS (
Auto
Configuration Server) you want to link. Please refer
to VigorACS user’s manual for detailed information.
URL
- Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Page 235 / 298
igor2930 Series User’s Guide
227
Username/Password
- Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username
: acs
Password
: password
CPE Client
It is not necessary for you to type them. Such information
is useful for Auto Configuration Server.
Enable/Disable
– Sometimes, port conflict might be
occurred. To solve such problem, you might want to
change port number for CPE. Please click Enable and
change the port number.
Periodic Inform Settings
Disable –
The system will not send inform message to
ACS server.
Enable –
The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is
Enable
. Please set interval
time or schedule time for the router to send
notification to CPE. Or click
Disable
to close the
mechanism of notification.
STUN Settings
Disable –
The system will not send connection request
binding message to STUN server.
The default setting is
Disable
.
Enable –
The system will send connection request
binding message to STUN server.
Server IP
– Type the domain name or IP address of the
STUN server.
Server Port
–Type the server port. The default setting is
3478.
Minimum Keep Alive Period
– The default setting is 60
seconds. It determines the minimum period that the
STUN binding request must be sent by the CPE to
maintain the binding.
Maximum Keep Alive Period
- It determines the
maximum period that the STUN binding request must be
sent by the CPE to maintain the binding.
3.15.3 Administrator Password
This page allows you to set new password.
Old Password
Type in the old password. The factory default setting for
password is blank.

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top