Page 471 / 794
Scroll up to view Page 466 - 470
Vigor2860 Series User’s Guide
457
Page 472 / 794
Vigor2860 Series User’s Guide
458
TSPC – Tunnel application, both IPv6 hosts communicate through IPv4 network
Choose
TSPC
and type the information for TSPC service.
Note:
While using such mode, you have to make sure the IPv4 network connection is
normal.
(In the following figure, the TSPC information is obtained from http://gogo6.com/ after
applied for the service.)
Click
OK
and open
Online Status
. If the connection is successful, the physical
connection will be shown as follows:
Page 473 / 794
Vigor2860 Series User’s Guide
459
AICCU – Tunnel application
Choose AICCU and type the information for AICCU of IPv6.
Note:
While using such mode, you have to make sure the IPv4 network connection is
normal.
(In the following figure, the AICCU information is obtained from
Click
OK
and open
Online Status
. If the connection is successful, the physical
connection will be shows as follows:
Page 474 / 794
Vigor2860 Series User’s Guide
460
DHCPv6 Client
Choose DHCPv6 Client. Click one of the identity associations and type the IAID
number.
Click
OK
and open
Online Status
. If the connection is successful, the physical
connection will be shows as follows:
Page 475 / 794
Vigor2860 Series User’s Guide
461
Static IPv6
Choose Static IPv6. Type IPv6 address, Prefix Length and Gateway Address.
Click
OK
and open
Online Status
. If the connection is successful, the physical
connection will be shows as follows:
19216811.live