Page 491 / 794
Scroll up to view Page 486 - 490
Vigor2860 Series User’s Guide
477
8.
Do the same steps to add class rules for IPTV and Data/Email with IP addresses as
shown below.
and
9.
Assuming you get 2MB/512Kb Internet line. You can click the
Setup
link of WAN1 to
set up the bandwidth for different groups among VoIP, IPTV and Data/Email.
Page 492 / 794
Vigor2860 Series User’s Guide
478
10.
In the Setup page, check the box of
Enable the QoS Control
. Type 30, 50 and 15 in the
boxes for VoIP, IPTV and Data/Email respectively. Check the box of
Enable UDP
Bandwidth Control
.
11.
Click
OK
to save the settings. The class rules for WAN1 are defined as shown below.
Page 493 / 794
Vigor2860 Series User’s Guide
479
4.5 QoS Setting Example
Assume a teleworker sometimes works at home and takes care of children. When working
time, he would use Vigor router at home to connect to the server in the headquarter office
downtown via either HTTPS or V PN to check email and access internal database. Meanwhile,
children may chat on Skype in the restroom.
1.
Go to
Bandwidth Management>>Quality of Service.
2.
Click
Setup
link of WAN(1/2/3). Make sure the QoS Control on the left corner is
checked. And select
BOTH
in
Direction
.
Page 494 / 794
Vigor2860 Series User’s Guide
480
3.
Set Inbound/Outbound bandwidth.
Note:
The rate of outbound/inbound must be smaller than the real bandwidth to
ensure correct calculation of QoS. It is suggested to set the bandwidth value for
inbound/outbound as 80% - 85% of physical network speed provided by ISP to
maximize the QoS performance.
4.
Return to previous page. Enter the Name of Index Class #1 by clicking
Edit
link. Type
the name “
E-mail
” for Class 1. Click
OK
to save the settings.
5.
Click the
Setup
link for WAN2. The user can set reserved bandwidth (e.g., 25%) for
E-mail
using protocol POP3 and SMTP. Click
OK
to save the settings.
Page 495 / 794
Vigor2860 Series User’s Guide
481
6.
Return to previous page. Enter the Name of Index Class #2 by clicking
Edit
link. In this
index, the user will set reserved bandwidth for
HTTPS
. And click
OK
.
7.
Click
Setup
link for WAN2.
19216811.live