Page 121 / 794
Scroll up to view Page 116 - 120
Vigor2860 Series User’s Guide
107
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system
to execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference.
TTL value is set by telnet command.
After finishing all the settings here, please click
OK
to activate them.
Details Page for IPv6 – Offline in WAN1/WAN2/WAN3/WAN4
When Offline is selected, the IPv6 connection will be disabled.
Details Page for IPv6 – PPP in WAN1/WAN2
During the procedure of IPv4 PPPoE connection, we can get the IPv6 Link Local Address
between the gateway and Vigor router through IPv6CP. Later, use DHCPv6 or accept RA to
acquire the IPv6 prefix address (such as: 2001:B010:7300:200::/64) offered by the ISP. In
addition, PCs under LAN also can have the public IPv6 address for Internet access by means
of the generated prefix.
No need to type any other information for PPP mode.
Below shows an example for successful IPv6 connection based on PPP mode.
Page 122 / 794
Vigor2860 Series User’s Guide
108
Note
: At present, the
IPv6 prefix
can be acquired via the PPPoE mode connection which
is available for the areas such as Taiwan (hinet), the Netherlands, Australia and UK.
Details Page for IPv6 – TSPC in WAN1/WAN2/WAN3/WAN4
Tunnel setup protocol client (TSPC) is an application which could help you to connect to IPv6
network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6 prefix
from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
Available settings are explained as follows:
Page 123 / 794
Vigor2860 Series User’s Guide
109
Item
Description
Username
Type the name obtained from the broker. It is suggested for
you to apply another username and password for
The maximum length of the name you can set is 63
characters.
Password
Type the password assigned with the user name.
The maximum length of the name you can set is 19
characters.
Confirm Password
Type the password again to make the confirmation.
Tunnel Broker
Type the address
for the tunnel broker IP, FQDN or an
optional port number.
After finished the above settings, click
OK
to save the settings.
Details Page for IPv6 – AICCU in WAN1/WAN2/WAN3/WAN4
Available settings are explained as follows:
Item
Description
Always On
Check this box to keep the network connection always.
Username
Type the name obtained from the broker. Please apply new
apply another username and password.
The maximum length of the name you can set is 19
characters.
Password
Type the password assigned with the user name.
The maximum length of the password you can set is 19
characters.
Confirm Password
Type the password again to make the confirmation.
Page 124 / 794
Vigor2860 Series User’s Guide
110
Tunnel Broker
Type the address
for the tunnel broker IP, FQDN or an
optional port number.
Subnet Prefix
Type the subnet prefix address obtained from service
provider.
The maximum length of the prefix you can set is 128
characters.
After finished the above settings, click
OK
to save the settings.
Details Page for IPv6 – DHCPv6 Client in WAN1/WAN2
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
Description
Identify Association
Choose
Prefix Delegation
or
Non-temporary Address
as
the identify association.
IAID
Type a number as IAID.
After finished the above settings, click
OK
to save the settings.
Page 125 / 794
Vigor2860 Series User’s Guide
111
Details Page for IPv6 – Static IPv6 in WAN1/WAN2
This type allows you to setup static IPv6 address for WAN interface.
Available settings are explained as follows:
Item
Description
Static IPv6 Address
configuration
IPv6 Address –
Type the IPv6 Static IP Address.
Prefix Length –
Type the fixed value for prefix length.
Add –
Click it to add a new entry.
Delete –
Click it to remove an existed entry.
Current IPv6 Address
Table
Display current interface IPv6 address.
Static IPv6 Gateway
Configuration
IPv6 Gateway Address -
Type your IPv6 gateway address
here.
After finished the above settings, click
OK
to save the settings.
19216811.live