1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 22
Page 106 / 794 Scroll up to view Page 101 - 105
Vigor2860 Series User’s Guide
92
Specify an IP address
– Click this radio button to specify
some data.
IP Address
– Type in the private IP address.
Subnet Mask
– Type in the subnet mask.
Gateway IP Address
– Type in gateway IP
address.
Default MAC Address
– Type in MAC address for the
router. You can use
Default MAC Address
or specify
another MAC address for your necessity.
Specify a MAC Address
– Type in the MAC address for
the router manually.
DNS Server IP Address
Type in the primary IP address for the router. If necessary,
type in secondary IP address for necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
Details Page for PPPoE/PPPoA in WAN1 (Physical Mode: ADSL)
Available settings are explained as follows:
Item
Description
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
, this function will be closed and all the settings that
Page 107 / 794
Vigor2860 Series User’s Guide
93
you adjusted in this page will be invalid.
Modem Settings
(for ADSL only)
Set up the DSL parameters required by your ISP. These
settings configured here are specified for ADSL only.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
>>
Multi
PVCs
.
Select M-PVCs Channel
means no selection will be
chosen.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
Encapsulating Type
- Drop down the list to choose the
type provided by ISP.
Protocol
- Drop down the list to choose the one (PPPoE or
PPPoA) provided by ISP.
If you have already used
Quick Start Wizard
to set the
protocol, then it is not necessary for you to change any
settings in this group.
Modulation
–Default setting is Multimode. Choose the one
that fits the requirement of your router.
PPPoE Pass-through
The router offers PPPoE dial-up connection. Besides, you
also can establish the PPPoE connection directly from local
clients to your ISP via the Vigor router. When PPPoA
protocol is selected, the PPPoE package transmitted by PC
will be transformed into PPPoA package and sent to WAN
server. Thus, the PC can access Internet through such
direction.
For Wired LAN
– If you check this box, PCs on the same
network can use another set of PPPoE session (different
with the Host PC) to access into Internet.
For Wireless LAN
– It is available for
n
model. If you
check this box, PCs on the same wireless network can use
another set of PPPoE session (different with the Host PC) to
access into Internet.
Note:
To have PPPoA Pass-through, please choose PPPoA
protocol and check the box(es) here. The router will behave
like a modem which only serves the PPPoE client on the
LAN. That’s, the router will offer PPPoA dial-up
connection.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system
Page 108 / 794
Vigor2860 Series User’s Guide
94
to execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference.
TTL value is set by telnet command.
MTU
It means Max Transmit Unit for packet.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing
tables information. Click
Enable RIP
for activating this
function.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Username
– Type in the username provided by ISP in this
field.
Password
– Type in the password provided by ISP in this
field.
Separate Account for ADSL
– In default, WAN1 supports
VDSL2/ADSL and uses the same PPPoE account and
password for connection. If required, you can configure
another account and password for ADSL connection by
checking this box. If it is checked, the system will ask you
to type another group of account and password additionally.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for PPP.
Idle Timeout
– Set the timeout for breaking down the
Internet after passing through the time without any action.
IP Address From ISP
Usually ISP dynamically assigns IP address to you each
time you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function.
WAN IP Alias
- If you have multiple public IP addresses
and would like to utilize them on the WAN interface, please
use WAN IP Alias. You can set up to 8 public IP addresses
other than the current one you are using.
Page 109 / 794
Vigor2860 Series User’s Guide
95
Fixed IP
– Click
Yes
to use this function and type in a
fixed IP address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC
Address
or specify another MAC address by typing on the
boxes of MAC Address for the router.
Specify a MAC Address –
Type the MAC address for the
router manually.
Index (1-15) in Schedule Setup -
You can type in four sets
of time schedule for your request. All the schedules can be
set previously in
Applications >> Schedule
web page and
you can use the number that you have set in that web page.
After finishing all the settings here, please click
OK
to activate them.
Details Page for MPoA/Static or Dynamic IP in WAN1 (Physical Mode:
ADSL)
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use
MPoA
/
Static or Dynamic IP
as the accessing protocol of the Internet, select
MPoA
/
Static or Dynamic IP
from the
WAN>
>
Internet Access >>WAN1
page. The following web
page will appear.
Page 110 / 794
Vigor2860 Series User’s Guide
96
Available settings are explained as follows:
Item
Description
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
, this function will be closed and all the settings that
you adjusted in this page will be invalid.
Modem Settings (for
ADSL only)
Set up the DSL parameters required by your ISP. These
settings configured here are specified for ADSL only.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
>>
Multi PVCs
.
Select M-PVCs Channel
means no selection will be
chosen.
Encapsulating
- Drop down the list to choose the type
provided by ISP.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
Modulation
–Default setting is Multimode. Choose the one
that fits the requirement of your router.
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system
to execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top