1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860n-plus
    5. /
  5. 24
Page 116 / 794 Scroll up to view Page 111 - 115
Vigor2860 Series User’s Guide
102
In such cases you need to click the
Specify a MAC
Address
and enter the MAC address in the MAC Address
field.
DNS Server IP Address
Type in the primary IP address for the router if you want to
use
Static IP
mode. If necessary, type in secondary IP
address for necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
Details Page for PPTP/L2TP in WAN2
To use
PPTP/L2TP
as the accessing protocol of the internet, please click the
PPTP/L2TP
tab.
The following web page will be shown.
Available settings are explained as follows:
Item
Description
PPTP/L2TP
Enable PPTP-
Click this radio button to
enable a PPTP
client to establish a tunnel to a DSL modem on the WAN
interface.
Enable L2TP
- Click this radio button to
enable a L2TP
client to establish a tunnel to a DSL modem on the WAN
interface.
Disable
– Click this radio button to close the connection
through PPTP or L2TP.
Server Address
- Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address
– Specify the gateway IP
address for DHCP server.
ISP Access Setup
Username
-Type in the username provided by ISP in this
field. The maximum length of the user name you can set is
63 characters.
Password
-Type in the password provided by ISP in this
field. The maximum length of the password you can set is
Page 117 / 794
Vigor2860 Series User’s Guide
103
62 characters.
Index (1-15) in Schedule Setup -
You can type in four sets
of time schedule for your request. All the schedules can be
set previously in
Application >> Schedule
web page and
you can use the number that you have set in that web page.
MTU
It means Max Transmit Unit for packet.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Idle Timeout
- Set the timeout for breaking down the
Internet after passing through the time without any action.
IP Address Assignment
Method(IPCP)
WAN IP Alias
- If you have multiple public IP addresses
and would like to utilize them on the WAN interface, please
use WAN IP Alias. You can set up to 32 public IP
addresses other than the current one you are using.
Fixed IP
- Usually ISP dynamically assigns IP address to
you each time you connect to it and request. In some case,
your ISP provides service to always assign you the same IP
address whenever you request. In this case, you can fill in
this IP address in the Fixed IP field. Please contact your ISP
before you want to use this function. Click
Yes
to use this
function and type in a fixed IP address in the box.
Fixed IP Address -
Type a fixed IP address.
WAN IP Network
Settings
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically.
Specify an IP address
– Click this radio button to specify
some data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
After finishing all the settings here, please click
OK
to activate them.
Page 118 / 794
Vigor2860 Series User’s Guide
104
Details Page for 3G/4G USB Modem (PPP mode) in WAN3/WAN4
To use
3G/4G USB Modem (PPP mode)
as the accessing protocol of the internet, please
choose
Internet Access
from
WAN
menu. Then, select
3G/4G USB Modem (PPP mode)
for
WAN3. The following web page will be shown.
Available settings are explained as follows:
Item
Description
Modem Support List
It lists all of the modems supported by such router.
3G /4G USB Modem (PPP
mode)
Click
Enable
for activating this function. If you click
Disable
, this function will be closed and all the settings that
you adjusted in this page will be invalid.
SIM PIN code
Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 15
characters.
Modem Initial String
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
The maximum length of the string you can set is 47
characters.
Page 119 / 794
Vigor2860 Series User’s Guide
105
APN Name
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click
Apply
.
The maximum length of the name you can set is 43
characters.
Modem Initial String2
The initial string 1 is shared with APN.
In some cases, user may need another initial AT command
to restrict 3G band or do any special settings.
The maximum length of the string you can set is 47
characters.
Modem Dial String
Such value is used to dial through USB mode. Please use
the default value. If you have any question, please contact
to your ISP.
The maximum length of the string you can set is 31
characters.
Service Name
Enter the description of the specific network service.
PPP Username
Type the PPP username (optional). The maximum length of
the name you can set is 63 characters.
PPP Password
Type the PPP password (optional). The maximum length of
the password you can set is 62 characters.
PPP Authentication
Select
PAP only
or
PAP or CHAP
for PPP.
Index (1-15) in Schedule
Setup
You can type in four sets of time schedule for your request.
All the schedules can be set previously in
Application >>
Schedule
web page and you can use the number that you
have set in that web page
WAN Connection
Detection
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system
to execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference.
TTL value is set by telnet command.
After finishing all the settings here, please click
OK
to activate them.
Page 120 / 794
Vigor2860 Series User’s Guide
106
Details Page for 3G/4G USB Modem (DHCP mode) in WAN3/WAN4
To use
3G/4G USB Modem (DHCP mode)
as the accessing protocol of the internet, please
choose
Internet Access
from
WAN
menu. Then, select
3G/4G USB Modem (DHCP mode)
for WAN3/WAN4. The following web page will be shown.
Available settings are explained as follows:
Item
Description
Modem Support List
It lists all of the modems supported by such router.
3G/4G USB Modem
(DHCP mode)
Click
Enable
for activating this function. If you click
Disable
, this function will be closed and all the settings that
you adjusted in this page will be invalid.
SIM PIN code
Type PIN code of the SIM card that will be used to access
Internet.
The maximum length of the PIN code you can set is 19
characters.
Network Mode
Force Vigor router to connect Internet with the mode
specified here. If you choose 4G/3G/2G as network mode,
the router will choose a suitable one according to the actual
wireless signal automatically.
APN Name
APN means Access Point Name which is provided and
required by some ISPs. Type the name and click
Apply.
The maximum length of the name you can set is 47
characters.
MTU
It means Max Transmit Unit for packet.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top