Page 36 / 51
Scroll up to view Page 31 - 35
Vigor2132 Series Quick Start Guide
28
3.
A summary page of such connection will be shown on the screen.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
Page 37 / 51
Vigor2132 Series Quick Start Guide
29
3.3 Wireless Configuration
For operating Vigor router well, it is necessary for you to set the wireless
LAN settings for using wireless function. Please read the following section
carefully for configuring the settings for this router.
(The default value of Frequency Domain was set by factory depends on the
reselling region.)
3.3.1 Basic Wireless LAN Concept
In an Infrastructure Mode of wireless network, Vigor wireless router plays a
role as an
Access Point (AP)
connecting to lots of wireless clients or
Stations (STA). All the STAs (clients) will share the same Internet
connection with other wired hosts via Vigor wireless router.
Page 38 / 51
Vigor2132 Series Quick Start Guide
30
3.3.2 Wireless Wizard
The wireless wizard allows you to configure settings specified for a host AP
(for home use or internal use for a company) and specified for a guest AP
(for any wireless clients accessing into Internet).
1.
Open
Wireless Wizard
.
2.
The screen of wireless wizard will be shown as follows. This page will
be used for
internal users in a company or your home
. Type the required
data offered by your ISP.
For the wireless client who wants to access into Internet through such
router, please
input the security key
value for connection.
Default Pre-Shared Key (PSK) with 13 ASCII characters is
provided and stated on the label pasted on the bottom of the router.
Page 39 / 51
Vigor2132 Series Quick Start Guide
31
Note that, for the communication, all wireless devices must support the
same encryption bit length and share the same key. If WEP mode is
selected, only one of four preset keys can be selected at one time.
3.
After typing the required information, click
Next
. The settings in the
page limit the wireless station (guest)
accessing into Internet but not
being allowed to share the LAN network and VPN connection
.
Note
: Security Key(s) defined for Host AP and Guest AP must be
different to avoid that guest accesses into internal server in a
company.
4.
After typing the required information, click
Next
.
5.
The following page will display the configuration summary for wireless
setting.
Page 40 / 51
Vigor2132 Series Quick Start Guide
32
6.
Click
Finish
to complete the wireless settings configuration.
3.4 Registering Vigor Router
You have finished the configuration of
Quick Start Wizard
and you can
surf the Internet at any time. Now it is the time to register your Vigor router
to MyVigor website for getting more service. Please follow the steps below
to finish the router registration.
1.
Please login the web configuration interface of Vigor router by typing
“
admin/admin
” as User Name / Password.
2.
Click
Support Area>>Production Registration
from the home page.
19216811.live