Page 16 / 51
Scroll up to view Page 11 - 15
Vigor2132 Series Quick Start Guide
8
1.2 Package Content
Quick Start Guide
CD
or
RJ-45 Cable (Ethernet)
Antenna x 2(n model)
Antenna x 3(ac model)
The type of the power adapter depends on the country that the router will
be installed:
UK-type Power Adapter
EU-type Power Adapter
USA/Taiwan-type Power
Adapter
AU/NZ-type Power Adapter
* The maximum power consumption is
24 Watt
.
Page 17 / 51
Vigor2132 Series Quick Start Guide
9
2. Installing Your Router
This section will guide you to install the router through hardware connection
and configure the router’s settings through web browser.
2.1 Hardware Installation
Before starting to configure the router, you have to connect your devices
correctly.
1.
Connect the cable Modem/DSL Modem/Media Converter to any WAN
port of router with Ethernet cable (RJ-45).
2.
Connect one end of an Ethernet cable (RJ-45) to one of the
LAN
ports
of the router and the other end of the cable (RJ-45) into the Ethernet port
on your computer.
3.
Connect one end of the power adapter to the router’s power port on the
rear panel, and the other side into a wall outlet.
4.
Power on the device by pressing down the power switch on the rear
panel.
5.
The system starts to initiate. After completing the system test, the
ACT
LED will light up and start blinking.
(For the detailed information of LED status, please refer to section 1.1.)
Page 18 / 51
Vigor2132 Series Quick Start Guide
10
2.2 Printer Installation
You can install a printer onto the router for sharing printing. All the PCs
connected this router can print documents via the router. The example
provided here is made based on Windows 7. For other Windows system,
please visit
www.DrayTek.com
.
Before using it, please follow the steps below to configure settings for
connected computers (or wireless clients).
1.
Connect the printer with the router through USB/parallel port.
2.
Open
All Programs>>Getting Started>>Devices and Printers
.
Page 19 / 51
Vigor2132 Series Quick Start Guide
11
3.
Click
Add a printer
.
4.
A dialog will appear. Click
Add a local printer
and click
Next
.
5.
In this dialog, choose
Create a new port.
In the field of
Type of port,
use the drop down list to select
Standard TCP/IP Port
. Then, click
Next
.
Page 20 / 51
Vigor2132 Series Quick Start Guide
12
6.
In the following dialog, type
192.168.1.1
(router’s LAN IP) in the field
of
Hostname or IP Address
and type
192.168.1.1
as the
Port name
.
Then, click
Next
.
7.
Click Standard and choose Generic Network Card.
19216811.live