Page 26 / 51
Scroll up to view Page 21 - 25
Vigor2132 Series Quick Start Guide
18
This page is left blank
.
Page 27 / 51
Vigor2132 Series Quick Start Guide
19
3. Basic Settings
To access Internet, please finish basic configuration after completing the
hardware installation.
3.1 Accessing Web Page
1.
Make sure your PC connects to the router correctly.
Notice:
You may either simply set up your computer to get IP
dynamically from the router or set up the IP address of the
computer to be the same subnet as
the default IP address of
. For the detailed information, please
refer to the later section - Trouble Shooting of this manual.
2.
Open a web browser on your PC and type
The
following window will be open to ask for username and password.
Please type “
admin/admin
” on Username/Password and click
Login
.
Notice:
If you fail to access to the web configuration, please go
to “Trouble Shooting” for detecting and solving your problem.
3.
Now, the
Main Screen
will pop up.
Page 28 / 51
Vigor2132 Series Quick Start Guide
20
4.
The web page can be logged out according to the chosen condition. The
default setting is
Auto Logout
, which means the web configuration
system will logout after five minutes without any operation. Change the
setting for your necessity.
3.2 Quick Start Wizard
The
Quick Start Wizard
is designed for you to easily set up your router for
Internet access. You can access
Wizards>>Quick Start Wizard
via Web
User Interface.
The home page will change slightly in accordance with the router model you
have.
Page 29 / 51
Vigor2132 Series Quick Start Guide
21
If your router can be under an environment with high speed NAT, the
configuration provide here can help you to deploy and use the router quickly.
The first screen of
Quick Start Wizard
is entering login password. After
typing the password, please click
Next
.
On the next page, please select the appropriate Internet access type according
to the information from your ISP. For example, you should select PPPoE
mode if the ISP provides you PPPoE interface.
PPPoE
1.
After finished the password settings, click the
Next
button. The
following page will be open for you to specify Internet Access Type.
Click
PPPoE
as the Internet Access Type and click
Next
.
Page 30 / 51
Vigor2132 Series Quick Start Guide
22
2.
Please manually enter the Username/Password provided by your ISP.
Then, click the
Next
button.
3.
A summary page of such connection will be shown on the screen.
4.
Click
Finish.
A page of
Quick Start Wizard Setup OK!!!
will appear.
Then, the system status of this protocol will be shown.
5.
Now, you can enjoy surfing on the Internet.
19216811.live