Page 46 / 51
Scroll up to view Page 41 - 45
Vigor2132 Series Quick Start Guide
38
5.
Select
Obtain an IP address automatically
and
Obtain DNS server
address automatically
. Finally, click
OK
.
Page 47 / 51
Vigor2132 Series Quick Start Guide
39
For Mac OS
1.
Double click on the current used Mac OS on the desktop.
2.
Open the
Application
folder and get into
Network
.
3.
On the
Network
screen, select
Using DHCP
from the drop down list of
Configure IPv4.
Page 48 / 51
Vigor2132 Series Quick Start Guide
40
4.3 Pinging the Router from Your Computer
The default gateway IP address of the router is
192.168.1.1. For some reason,
you might need to use “ping” command to check the link status of the router.
The most important thing is that the computer will receive a reply from
192.168.1.1.
If not, please check the IP address of your computer. We
suggest you setting the network connection as
get IP automatically
. (Please
refer to the section 4.2)
Please follow the steps below to ping the router correctly.
For Windows
1.
Open the
Command
Prompt window (from
Start menu> Run
).
2.
Type
command
(for Windows 95/98/ME) or
cmd
(for Windows NT/
2000/XP/Vista/7). The DOS command dialog will appear.
3.
Type
and press [Enter]. If the link is OK, the line of
“
” will appear.
4.
If the line does not appear, please check the IP address setting of your
computer.
For Mac OS (Terminal)
1.
Double click on the current used Mac OS on the desktop.
2.
Open the
Application
folder and get into
Utilities
.
3.
Double click
Terminal
. The Terminal window will appear.
4.
Type
and press [Enter]. If the link is OK, the line of
“64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms
” will
appear.
Page 49 / 51
Vigor2132 Series Quick Start Guide
41
4.4 Checking If the ISP Settings are OK or Not
Open
WAN >> Internet Access
page and then check whether the ISP
settings are set correctly. Click
Details Page
of WAN1/WAN2/WAN3
to
review the settings that you configured previously.
Page 50 / 51
Vigor2132 Series Quick Start Guide
42
4.5 Backing to Factory Default Setting If Necessary
Sometimes, a wrong connection can be improved by returning to the default
settings. Try to reset the router by software or hardware.
Warning:
After pressing
factory default setting
, you will loose
all settings you did before. Make sure you have recorded all
useful settings before you pressing.
Software Reset
You can reset the router to factory default via Web page. Go to
System
Maintenance
and
choose
Reboot System
on the web page. The following
screen will appear. Choose
Using factory default configuration
and click
Reboot Now
. After few seconds, the router will return all the settings to the
factory settings.
19216811.live