1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2130n
    5. /
  5. 34
Page 166 / 241 Scroll up to view Page 161 - 165
Vigor2130 Series User’s Guide
158
Queue Weighted
Use the drop down list to choose 1, 2, 4, or 8 as the queue
weighted number.
4.5.6 QoS Statistics
This page displays statistics for QoS setting. Click WAN/LAN link to check detailed
information for each interface.
Click
WAN/LAN
link to check detailed information for each interface.
Rx Packets
Display the counting number of the packet received.
Page 167 / 241
Vigor2130 Series User’s Guide
159
Rx Octets
Display the total received bytes.
Rx Unicast
Display the counting number of the received unicast packet.
Rx Broadcast
Display the counting number of the received broadcast packet.
Rx Pause
Display the counting number of the received pause packet.
RX 64 Bytes
Display the number of 64-byte frames in good and bad packets
received.
RX 65-127 Bytes
Display the number of 65 ~ 127-byte frames in good and bad
packets received.
RX 128-255 Bytes
Display the number of 128 ~ 255-byte frames in good and bad
packets received.
RX 256-511 Bytes
Display the number of 256 ~ 511-byte frames in good and bad
packets received.
RX 512-1023 Bytes
Display the number of 512 ~ 1023-byte frames in good and bad
packets received.
RX 1024- 1526 Bytes
Display the number of 1024-1522-byte frames in good and bad
packets received.
RX 1527 Bytes
Display the number of 1527-byte frames in good and bad
packets received.
Rx Low
Display the low queue counter of the packet received.
Rx Normal
Display the normal queue counter of the packet received.
Rx Medium
Display the medium queue counter of the packet received.
Rx High
Display the high queue counter of the packet received.
Rx Drops
Display the number of frames dropped due to the lack of
receiving buffer.
Rx CRC/Alignment
Display the number of Alignment errors packets received.
Rx Undersize
Display the number of short frames (<64 Bytes) with valid
CRC.
Rx Oversize
Display the number of long frames (according to max_length
register) with valid CRC.
Rx Fragments
Display the number of short frames (< 64 bytes) with invalid
CRC.
Rx Jabber
Display the number of long frames (according to max_length
register) with invalid CRC.
Rx Filtered
Display the filtered number of the packet received.
Tx Packets
Display the the counting number of the packet transmitted.
Tx Octets
Display the total transmitted bytes.
Tx Unicast
Display the show the counting number of the transmitted
unicast packet.
Tx Multicast
Display the show the counting number of the transmitted
multicast packet.
Tx Broadcast
Display the counting number of the transmitted broadcast
packet.
Page 168 / 241
Vigor2130 Series User’s Guide
160
Tx Pause
Show the counting number of the transmitted pause packet.
Tx 64 Bytes
Display the number of 64-byte frames in good and bad packets
transmitted.
Tx 65-127 Bytes
Display the number of 65 ~ 127-byte frames in good and bad
packets transmitted.
Tx 128-255 Bytes
Display the number of 128 ~ 255-byte frames in good and bad
packets transmitted.
Tx 256-511 Bytes
Display the number of 256 ~ 511-byte frames in good and bad
packets transmitted.
Tx 512-1023 Bytes
Display the number of 512 ~ 1023-byte frames in good and bad
packets transmitted.
Tx 1024- 1526 Bytes
Display the number of 1024 ~ 1522-byt frames in good and bad
packets transmitted.
Tx 1527 Bytes:
Display the number of 1527-byte frames in good and bad
packets transmitted.
Tx Low
Display the low queue counter of the packet transmitted.
Tx Normal
Display the normal queue counter of the packet transmitted.
Tx Medium
Display the medium queue counter of the packet received.
Tx High
Display the high queue counter of the packet received.
Tx Drops
Display the number of frames dropped due to excessive
collision, late collision, or frame aging.
Tx lat/Exc.Coll.
Display the number of Frames late collision or excessive
collision Error, which switch transmitted.
4.6 Applications
Below shows the menu items for Applications.
4.6.1 Dynamic DNS
The ISP often provides you with a dynamic IP address when you connect to the Internet via
your ISP. It means that the public IP address assigned to your router changes each time you
access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic
WAN IP address. It allows the router to update its online WAN IP address mappings on the
specified Dynamic DNS server. Once the router is online, you will be able to use the
registered domain name to access the router or internal virtual servers from the Internet. It is
particularly helpful if you host a web server, FTP server, or other server behind the router.
Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the
DDNS service providers. The router provides up to three accounts from three different DDNS
service providers. Basically, Vigor routers are compatible with the DDNS services supplied by
most popular DDNS service providers such as
www.dyndns.org, www.no-ip.com,
Page 169 / 241
Vigor2130 Series User’s Guide
161
www.dtdns.com, www.changeip.com, www.dynamic- nameserver.com.
You should visit
their websites to register your own domain name for the router.
Enable Dynamic DNS
Check this box to enable the current account.
DynDNS Service
Select the service provider for the DDNS account.
Hostname
Type in one domain name that you applied previously. Use the
drop down list to choose the desired domain.
Username
Type in the login name that you set for applying domain.
Password
Type in the password that you set for applying domain.
Check IP change every
Set the interval for checking the information.
Force IP update every
Force the router updates its information to DDNS server with
the interval set here.
Click
OK
button to activate the settings. You will see your setting has been saved.
4.6.2 Schedule
The Vigor router has a built-in real time clock which can update itself manually or
automatically by means of Network Time Protocols (NTP). As a result, you can not only
schedule the router to dialup to the Internet at a specified time, but also restrict Internet access
to certain hours so that users can connect to the Internet only during certain hours, say,
business hours. The schedule is also applicable to other functions.
You have to set your time before set schedule. In
System Maintenance>>
Time and Date
menu, press
Inquire Time
button to set the Vigor router’s clock to current time of your PC.
The clock will reset once if you power down or reset the router. There is another way to set up
time. You can inquiry an NTP server (a time server) on the Internet to synchronize the router’s
clock. This method can only be applied when the WAN connection has been built up.
You can set up to
15
schedules. To add a schedule profile, please click
Add
.
Page 170 / 241
Vigor2130 Series User’s Guide
162
Enable
Check to enable the schedule.
Start Date
Specify the starting date of the schedule.
Start Time
Specify the starting time of the schedule.
Action
Specify which action should be applied during the period of the
schedule.
WAN UP/DOWN –
WAN connection will be activated /
inactivated based on the time schedule configured here.
WiFi UP/DOWN –
Wireless Wi-Fi connection will be
activated / inactivated based on the time schedule configured
here.
VPN UP/DOWN -
VPN connection will be activated /
inactivated based on the time schedule configured here.
Acts
Specify how often the schedule will be applied
Once -
The schedule will be applied just once
Routine
/
Weekday -
Specify which days in one week should
perform the schedule.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top