DrayTek Vigor2130n Router Manual PDF (Setup & Configuration Guide)

Page 146 / 241 Scroll up to view Page 141 - 145

Vigor2130 Series User’s Guide

138

list will be applied to if matching with the rule defined in this

page.

Rate Limiter -

Select a rate limiter to apply to this port.

Available settings include

Disabled

, and 1 to 10. The default

value is

Disabled

. Click the

Rate Limiter

link to configure

different rates for each ID.

Detailed Explanation for Frame Type

Frame Type selection will lead different options for configuration.

z

Choose

Ethernet Type

as the Frame Type, you will get

Ethernet Type Parameters

option as the following:

Ethernet Type Filter

Choose

Any

to set the parameter with any value set by the

router automatically or choose

Specific

to specify certain

value (the range is 0x0000 to 0xFFFF).

z

Choose

ARP

as the Frame Type, you will get

ARP Parameters

option as the following:

Page 147 / 241

Vigor2130 Series User’s Guide

139

ARP/RARP

Choose the ARP/RARP that you want to filter.

Request/Reply

Choose the request or replay that you want to filter.

Sender IP Filter

Specify the sender IP filter for this ACE.

Choose

Any

to filter all of the packets.

Choose

Host

to filter the packets from the host with the

address typed in Sender IP Address filed.

Choose

Network

to filter the packets within the network

defined in

Sender IP Address

and

Sender

IP Mask

fields.

Sender IP Address

Type the Sender IP Address here. This option is available

when you choose

Host

or

Network

as Sender IP Filter.

Sender IP Mask

Type the Sender IP Mask here. This option is available

only when you choose

Network

as Sender IP Filter.

Target IP Filter

Specify the target IP filter for this specific ACE.

Choose

Any

to filter all of the packets.

Choose

Host

to filter the packets from the host with the

address typed in Target IP Address filed.

Choose

Network

to filter the packets within the network

defined in

Target IP Address

and

Target

IP Mask

fields.

Page 148 / 241

Vigor2130 Series User’s Guide

140

Target IP Address

Type the Target IP Address here. This option is available

when you choose

Host

or

Network

as Target IP Filter.

Target IP Mask

Type the Target IP Mask here. This option is available

only when you choose

Network

as Target IP Filter.

ARP SMAC Match

Specify whether frames/packets can meet the action

according to the sender hardware address field (SHA)

settings.

0

: means sender hardware address is not equal to the

SMAC address.

1

: means sender hardware address is equal to the SMAC

address.

Any

: means any value is allowed.

RARP DMAC Match

Specify whether frames can hit the action according to

their target hardware address field (THA) settings.

0

: means target hardware address is not equal to the

SMAC address.

1

: means s target hardware address is equal to the SMAC

address.

Any

: means any value is allowed.

IP/Ethernet Length

Specify whether frames/packets can meet the action

according to the ARP/RARP hardware address length

(HLN) and protocol address length (PLN) settings.

0

:

means ARP/RARP frames/packets where the hardware

address length is equal to Ethernet (0x06) and the protocol

address length is equal to IPv4 (0x04)

must not

match this

entry.

1

:

means ARP/RARP frames/packets where the hardware

address length is equal to Ethernet (0x06) and the protocol

address length is equal to IPv4 (0x04)

must

match this

entry.

Any:

Any value is allowed

IP

Specify whether frames/packets can meet the action

according to their ARP/RARP hardware address space

(HRD) settings.

Page 149 / 241

Vigor2130 Series User’s Guide

141

0

:

ARP/RARP frames where the hardware address space is

equal to Ethernet (1) must not match this entry.

1

:

ARP/RARP frames where the hardware address space is

equal to Ethernet (1) must match this entry.

Any:

Any value is allowed.

Ethernet

Specify whether frames can hit the action according to

their ARP/RARP protocol address space (PRO) settings.

0:

ARP/RARP frames where the protocol address space is

equal to IP (0x800) must not match this entry.

1:

ARP/RARP frames where the protocol address space is

equal to IP (0x800) must match this entry.

Any:

Any value is allowed.

z

Choose

IPv4

as the Frame Type. You will see

IP Parameters

on the bottom of the page.

If you choose

ICMP

as

IP Protocol Filter

, you will get the page as the following:

Source IP

Specify the Source IP filter for this ACE.

Any:

No source IP filter is specified.

Host

: Source IP filter is set to Host. Specify the source IP

address in the Source IP Address field that appears.

Network:

Source IP filter is set to Network. Specify the

source IP address and source IP mask in the Source IP

Address and Source IP Mask fields that appear.

Source IP Address

Type the Source IP Address here. This option is available

when you choose

Host

or

Network

as Source IP.

Source IP Mask

Type the Source IP Mask here. This option is available

only when you choose

Network

as source Source IP.

Page 150 / 241

Vigor2130 Series User’s Guide

142

Dest IP Filter

Specify the destination IP filter for this ACE.

Any:

No destination IP filter is specified.

Host:

Destination IP filter is set to Host. Specify the

destination IP address in the

Dest IP Address field that

appears.

Network:

Destination IP filter is set to Network. Specify

the destination IP address and destination IP mask in the

DIP Address and Dest IP Mask fields that appear.

Dest IP Address

Type the Dest IP Address here. This option is available

when you choose

Host

or

Network

as destination Dest IP.

Dest IP Mask

Type the Dest IP Mask here. This option is available only

when you choose

Network

as destination Dest IP.

ICMP Type Filter

Specify the ICMP filter for this ACE.

Any:

No ICMP filter is specified.

Specific:

If you want to filter a specific ICMP filter with

this ACE, you can enter a specific ICMP value. A field for

entering an ICMP value appears.

ICMP Type Value

If you choose

Specific

as ICMP Type Filter, you have to

type the ICMP Type Value manually. The allowed range is

0 to 255. A frame meeting this ACE matches this ICMP

value.

ICMP Code Filter

Specify the ICMP code filter for this ACE.

Any:

No ICMP code filter is specified (ICMP code filter

status is "don't-care").

Specific:

If you want to filter a specific ICMP code filter

with this ACE, you can enter a specific ICMP code value.

A field for entering an ICMP code value appears.

ICMP Code Value

If you choose Specific as ICMP Code Filter, you have to

type the ICMP Type Value manually. The allowed range is

0 to 255. A frame meeting this ACE matches this ICMP

value.

z

Choose

IPv4

as the Frame Type. You will see

IP Parameters

on the bottom of the page.

If you choose

UDP

as

IP Protocol Filter

, you will get the page as the following:

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share