Vigor2110 Series User’s Guide

19

2.4.2 PPPoE

PPPoE stands for

Point-to-Point Protocol over Ethernet

. It relies on two widely accepted

standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a

common broadband medium, such as a single DSL line, wireless device or cable modem. All

the users over the Ethernet can share a common connection.

PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection

for accessing the Internet. Your service provider will provide you information about user name,

password, and authentication mode.

If your ISP provides you the

PPPoE

connection, please select

PPPoE

for this router. The

following page will be shown:

User Name

Assign a specific valid user name provided by the ISP.

Password

Assign a valid password provided by the ISP.

Confirm Password

Retype the password.

Vigor2110 Series User’s Guide

20

Click

Next

for viewing summary of such connection.

Click

Finish.

Then, the system status of this protocol will be shown.

2.4.3 PPTP

Click

PPTP

as the protocol. Type in all the information that your ISP provides for this

protocol.

Click

Next

for viewing summary of such connection.

Vigor2110 Series User’s Guide

21

Click

Finish.

Then, the system status of this protocol will be shown.

2.4.4 Static IP

Click

Static IP

as the protocol. Type in all the information that your ISP provides for this

protocol.

After finishing the settings in this page, click

Next

to see the following page.

Vigor2110 Series User’s Guide

22

Click

Finish.

Then, the system status of this protocol will be shown.

2.4.5 DHCP

Click

DHCP

as the protocol. Type in all the information that your ISP provides for this

protocol.

After finishing the settings in this page, click

Next

to see the following page.

Vigor2110 Series User’s Guide

23

Click

Finish.

Then, the system status of this protocol will be shown.

2.5 Online Status

The online status shows the system status, WAN status, and other status related to this router

within one page. If you select

PPPoE/PPPoA

as the protocol, you will find out a link of

Dial

PPPoE

or

Drop PPPoE

in the Online Status web page.

Online status for DHCP

Detailed explanation is shown below:

Primary DNS

Displays the IP address of the primary DNS.

Secondary DNS

Displays the IP address of the secondary DNS.

LAN Status

IP Address

Displays the IP address of the LAN interface.

TX Packets

Displays the total transmitted packets at the LAN interface.

RX Packets

Displays the total number of received packets at the LAN interface.

WAN Status

Line

Displays the physical connection (Ethernet) of this interface.