1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2110
    5. /
  5. 3
Page 11 / 275 Scroll up to view Page 6 - 10
Vigor2110 Series User’s Guide
4
1.2.2 For Vigor2110n
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
The WAN port is connected.
WAN
Blinking
It will blink while transmitting data.
On
The port is connected.
Off
The port is disconnected.
LAN 1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while detecting an attack.
On
The WPS is on.
Off
The WPS is off.
WPS
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
On
Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS will be on.
Off
The WPS is off.
WPS Button
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
Interface
Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN
Connector for accessing the Internet.
LAN (1-4)
Connecters for local networked devices.
USB
Connecter for USB storage (Pen Driver Mobile/HD) or
printer.
Page 12 / 275
Vigor2110 Series User’s Guide
5
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 13 / 275
Vigor2110 Series User’s Guide
6
1.2.3 For Vigor2110Vn
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
The WAN port is connected.
WAN
Blinking
It will blink while transmitting data.
On
The port is connected.
Off
The port is disconnected.
LAN 1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone1/
Phone2
Blinking
A phone call comes.
On
A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off about six
seconds later.
Line
Off
There is no PSTN phone call.
On
The WPS is on.
Off
The WPS is off.
WPS
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
On
Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS will be on.
Off
The WPS is off.
WPS Button
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
Interface
Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
WAN
Connector for accessing the Internet.
LAN (1-4)
Connecters for local networked devices.
USB
Connecter for USB storage (Pen Driver Mobile/HD) or
printer.
Page 14 / 275
Vigor2110 Series User’s Guide
7
Interface
Description
Line
Connector for PSTN life line.
Phone2/Phone1
Connecter of analog phone for VoIP communication
.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 15 / 275
Vigor2110 Series User’s Guide
8
1.3 Hardware Installation
Before starting to configure the router, you have to connect your devices correctly.
1.
Connect Line port to land line jack with a RJ-11 cable (Vn model).
2.
Connect this device to a modem with a RJ-45 cable.
3.
Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
4.
Connect Phone port to a conventional analog telephone.
5.
Connect detachable antennas to the router for Vigor2110 series (n model).
6.
Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
7.
Power on the router.
8.
Check the
ACT
and
WAN
,
LAN
LEDs to assure network connections.
Caution
:
1. Each of the Phone ports can be connected to an analog phone only. Do not connect
the phone ports to the land line jack. Such connection might damage your router.
2. When the power is shutdown, VoIP phone will be disconnected. However, a phone
set connected to Phone 2 port can be used as the traditional telephone for the line will be
guided to land line jack via the router (loop through).

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top