Page 16 / 275
Scroll up to view Page 11 - 15
Vigor2110 Series User’s Guide
9
Stand Installation
The Vigor2110 must be placed erectly. Therefore you have to install a stand onto the router to
make it standing firmly. Please follow the figures listed below to finish the installation.
c
d
e
f
Page 17 / 275
Vigor2110 Series User’s Guide
10
1.4 Printer Installation
You can install a printer onto the router for sharing printing. All the PCs connected this router
can print documents via the router. The example provided here is made based on Windows
XP/2000. For Windows 98/SE/Vista, please visit
www.draytek.com
.
Before using it, please follow the steps below to configure settings for connected computers
(or wireless clients).
1.
Connect the printer with the router through USB/parallel port.
2.
Open
Start->Settings-> Printer and Faxes
.
3.
Open
File->Add Printer
. A welcome dialog will appear. Please click
Next
.
Page 18 / 275
Vigor2110 Series User’s Guide
11
4.
Click Local printer attached to this computer and click Next.
5.
In this dialog, choose
Create a new port Type of port
and use the drop down list to
select
Standard TCP/IP Port
. Click
Next
.
Page 19 / 275
Vigor2110 Series User’s Guide
12
6.
In the following dialog, type
192.168.1.1
(router’s LAN IP) in the field of
Printer Name
or IP Address
and type
IP_192.168.1.1
as the port name. Then, click
Next
.
7.
Click Standard and choose Generic Network Card.
8.
Then, in the following dialog, click
Finish
.
Page 20 / 275
Vigor2110 Series User’s Guide
13
9.
Now, your system will ask you to choose right name of the printer that you installed onto
the router. Such step can make correct driver loaded onto your PC. When you finish the
selection, click
Next
.
10.
For the final stage, you need to go back to
Control Panel-> Printers
and edit the
property of the new printer you have added.
11.
Select "
LPR
" on Protocol, type
p1
(number 1) as Queue Name. Then click
OK
. Next
please refer to the red rectangle for choosing the correct protocol and UPR name.
19216811.live