Vigor2110 Series User’s Guide

54

For

Block Unknown Domain –

this function can block incoming calls (through Phone port)

from unrecognized domain that is not specified in SIP accounts. Such control also can be done

based on preconfigured schedules.

For

Block IP Address –

this function can block incoming calls (through Phone port) coming

from IP address. Such control also can be done based on preconfigured schedules.

Regional

This page allows you to process incoming or outgoing phone calls by regional. Default values

(common used in most areas) will be shown on this web page. You

can change

the number

based on the region that the router is placed.

Vigor2110 Series User’s Guide

55

Last Call Return [Miss]

Sometimes, people might miss some phone calls. Please dial

number typed in this field to know where the last phone call

comes from and call back to that one.

Last Call Return [In]

You have finished an incoming phone call, however you want

to call back again for some reason. Please dial number typed in

this field to call back to that one.

Last Call Return [Out]

Dial the number typed in this field to call the previous outgoing

phone call again.

Call Forward [All][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place.

Call Forward [Deact]

Dial the number typed in this field to release the call forward

function.

Call Forward [Busy][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place while the phone is busy.

Call Forward [No Ans][Act]

Dial the number typed in this field to forward all the incoming

calls to the specified place while there is no answer of the

connected phone.

Do Not Disturb [Act]

Dial the number typed in this field to invoke the function of

DND.

Do Not Distrub [Deact]

Dial the number typed in this field to release the DND function.

Hide caller ID [Act]

Dial the number typed in this field to make your phone number

(ID) not displayed on the display panel of remote end.

Hide caller ID [Deact]

Dial the number typed in this field to release this function.

Vigor2110 Series User’s Guide

56

Call Waiting [Act]

Dial the number typed in this field to make all the incoming

calls waiting for your answer.

Call Waiting [Deact]

Dial the number typed in this field to release this function.

Block Anonymous[Act]

Dial the number typed in this field to block all the incoming

calls with unknown ID.

Block Anonymous[Deact]

Dial the number typed in this field to release this function.

Block Unknown Domain

[Act]

Dial the number typed in this field to block all the incoming

calls from unknown domain.

Block Unknown Domain

[Deact]

Dial the number typed in this field to release this function.

Block IP Calls [Act]

Dial the number typed in this field to block all the incoming

calls from IP address.

Block IP Calls [Deact]

Dial the number typed in this field to release this function.

Block Last Calls [Act]

Dial the number typed in this field to block the last incoming

phone call.

PSTN Setup

Some emergency phone (e.g., 911) or special phone cannot be dialed out by using VoIP and

can be called out through PSTN line only. To solve this problem, this page allows you to set

five sets of PSTN number for dialing without passing through Internet. Please type the number

in the field of

phone number for

PSTN relay

.

Then, check the

Enable

box to make the PSTN number available for dial whenever you need.

3.5.2 SIP Accounts

In this section, you set up your own SIP settings. When you apply for an account, your SIP

service provider will give you an

Account Name

or user name,

SIP Registrar, Proxy,

and

Domain name

. (The last three might be the same in some case). Then you can tell your folks

your SIP Address as in

Account Name@ Domain name

Vigor2110 Series User’s Guide

57

As Vigor VoIP Router is turned on, it will first register with Registrar using

AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the

destination using AccountName@Domain/Realm as identity.

Index

Click this link to access into next page for setting SIP account.

Profile

Display the profile name of the account.

Domain/Realm

Display the domain name or IP address of the SIP registrar

server.

Proxy

Display the domain name or IP address of the SIP proxy server.

Account Name

Display the account name of SIP address before @.

Ring Port

Specify which port will ring when receiving a phone call.

STUN Server

Type in the IP address or domain of the STUN server.

External IP

Type in the gateway IP address.

SIP PING interval

The default value is 150 (sec). It is useful for a Nortel server

NAT Traversal Support.

Status

Show the status for the corresponding SIP account.

R

means

such account is registered on SIP server successfully.

–

means

the account is failed to register on SIP server.

Vigor2110 Series User’s Guide

58

Profile Name

Assign a name for this profile for identifying. You can type

similar name with the domain. For example, if the domain name

is

draytel.org

, then you might set

draytel-1

in this field.

Register via

If you want to make VoIP call without register personal

information, please choose

None

and check the box to achieve

the goal.

Some SIP server allows user to use VoIP function

without registering. For such server, please check the box of

Call without registration

. Choosing

Auto

is recommended.

SIP Port

Set the port number for sending/receiving SIP message for

building a session. The default value is

5060.

Your peer must

set the same value in his/her Registrar.

Domain/Realm

Set the domain name or IP address of the SIP Registrar server.

Proxy

Set domain name or IP address of SIP proxy server. By the time

you can type

:port

number

after the domain name to specify

that port as the destination of data transmission (e.g.,

nat.draytel.org:5065

)

Act as Outbound Proxy

Check this box to make the proxy acting as outbound proxy.

Display Name

The caller-ID that you want to be displayed on your friend’s

screen.

Account Number/Name

Enter your account name of SIP Address, e.g. every text before

@.

Authentication ID

Check the box to invoke this function and enter the name or

number used for SIP Authorization with SIP Registrar. If this