DrayTek Vigor-2110 Router Manual PDF (Setup & Configuration Guide)

Page 56 / 275 Scroll up to view Page 51 - 55

Vigor2110 Series User’s Guide

49

Click any index number to display the dial plan setup page.

Enable

Click this to enable this entry.

Phone Number

The speed-dial number of this index. This can be any number

you choose, using digits

0-9

and

*

.

Display Name

The Caller-ID that you want to be displayed on your friend’s

screen. This let your friend can easily know who’s calling

without memorizing lots of SIP URL Address.

SIP URL

Enter your friend’s SIP Address.

Dial Out Account

Choose one of the SIP accounts for this profile to dial out. It is

useful for both sides (caller and callee) that registered to

different SIP Registrar servers. If caller and callee do not use

Page 57 / 275

Vigor2110 Series User’s Guide

50

the same SIP server, sometimes, the VoIP phone call

connection may not succeed. By using the specified dial out

account, the successful connection can be assured.

Loop through

The selection should be as the following:

Backup Phone Number

When the VoIP phone is obstructs or the Internet breaks down

for some reasons, the backup phone will be dialed out to replace

the VoIP phone number. At this time, the phone call will be

changed from VoIP phone into PSTN call according to the loop

through direction chosen. Note that, during the phone switch,

the blare of phone will appear for a short time. And when the

VoIP phone is switched into the PSTN phone, the telecom co.

might charge you for the connection fee. Please type in backup

phone number (PSTN) for this VoIP phone setting.

Digit Map

For the convenience of user, this page allows users to edit prefix number for the SIP account

with adding number, stripping number or replacing number. It is used to help user having a

quick and easy way to dial out through VoIP interface.

Page 58 / 275

Vigor2110 Series User’s Guide

51

Enable

Check this box to invoke this setting.

Prefix Number

The phone number set here is used to add, strip, or replace the

OP number.

Mode

None

- No action.

Add

- When you choose this mode, the OP number will be

added with the prefix number for calling out through the

specific VoIP interface.

Strip

- When you choose this mode, the OP number will be

deleted by the prefix number for calling out through the specific

VoIP interface. Take the above picture (Prefix Table Setup web

page) as an example, the OP number of

886

will be deleted

completely for the prefix number is set with

886

.

Replace

- When you choose this mode, the OP number will be

replaced by the prefix number for calling out through the

specific VoIP interface. Take the above picture (Prefix Table

Setup web page) as an example, the prefix number of 03 will be

replaced by 8863. For example: dial number of “031111111”

Page 59 / 275

Vigor2110 Series User’s Guide

52

will be changed to “88631111111” and sent to SIP server.

OP Number

The front number you type here is the first part of the account

number that you want to execute special function (according to

the chosen mode) by using the prefix number.

Min Len

Set the minimal length of the dial number for applying the

prefix number settings. Take the above picture (Prefix Table

Setup web page) as an example, if the dial number is between 7

and 9, that number can apply the prefix number settings here.

Max Len

Set the maximum length of the dial number for applying the

prefix number settings.

Interface

Choose the one that you want to enable the prefix number

settings from the saved SIP accounts. Please set up one SIP

account first to make this interface available.

Call Barring

Call barring is used to block phone calls coming from the one that is not welcomed.

Click any index number to display the dial plan setup page.

Page 60 / 275

Vigor2110 Series User’s Guide

53

Enable

Click this to enable this entry.

Call Direction

Determine the direction for the phone call, IN – incoming call,

OUT-outgoing call, IN & OUT – both incoming and outgoing

calls.

Barring Type

Determine the type of the VoIP phone call, URI/URL or

number.

Specific URI/URL or

Specific Number

This field will be changed based on the type you selected for

barring Type.

Interface

All

means all the phone calls will be blocked with such

mechanism.

Index (1-15) in Schedule

Enter the index of schedule profiles to control the call barring

according to the preconfigured schedules. Refer to section

3.5.2

Schedule

for detailed configuration.

Additionally, you can set advanced settings for call barring such as

Block Anonymous

,

Block

Unknown Domain

or

Block IP Address

. Simply click the relational links to open the web

page.

For

Block Anonymous –

this function can block the incoming calls without caller ID on the

interface (Phone port) specified in the following window. Such control also can be done based

on preconfigured schedules.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share