37

D-Link DWR-922 User Manual

Section 3 - Configuration

Phones and Devices

This page allows you to configure your connected phone devices. Each section can be accessed by selecting the appropriate option under

Phones and Devices

.

Existing Analog

Phones:

Edit Analog

Phone:

Incoming

Accounts:

Displays a list of connected analog phones.

First, select a device by clicking on the

Edit

radio button in the

Existing Analog Phones

table above. Next, configure the phone

settings below. If you are not sure, leave the settings at their

defaults, or contact your phone manufacturer.

Check the

Enable for Incoming

box to enable the phone to

received calls from the specified accounts.

Click

Apply

when you are done.

Analog Phones

38

D-Link DWR-922 User Manual

Section 3 - Configuration

External Call Forwarding

Add External Call

Forwarding:

Click

Add

to configure a new call diversion (forwarding). More

settings will appear.

Check

Active External Call Forwarding

to enable the new rule.

Enter a

Name

of your choice, and enter the

Forwarding Number

to forward incoming calls to. Finally, select the VoIP account that

the rule should use, under the

Connect via

drop-down menu.

Click

Apply

when you are done.

39

D-Link DWR-922 User Manual

Section 3 - Configuration

Incoming Call Rules

This page allows you to configure the inbound call rules.

Account:

Analog Phones:

External Call

Diversions

(forwarding):

Select a previously-configured VoIP account from the drop-down

menu.

Click

Edit Rules

to display a list of currently-configured rules.

Displays a list of analog phone devices and their statuses.

Click

Add/Apply

to add a new rule.

40

D-Link DWR-922 User Manual

Section 3 - Configuration

Country Code

This page allows you to specify the default country code of outbound phone calls.

Country Code:

Select the country from the drop-down menu. The appropriate

country code will be applied to each outgoing call.

Click

Apply

when you are done.

41

D-Link DWR-922 User Manual

Section 3 - Configuration

Check the box to enable the rule.

Enter the IP of the specified network that you want to access using

the static route.

Enter the subnet mask to be used for the specified network.

Select the interface to be used for the rule.

Enter the gateway IP address for the specified network.

Enter the metric to be used for the rule.

Enable Routing

Rule:

Destination IP

Address:

Destination

Subnet Mask:

Interface:

Gateway IP

Address:

Metric:

Routing

This page allows you to specify custom routes that determine how data is moved around your network.