Page 46 / 88
Scroll up to view Page 41 - 45
42
D-Link DWR-922 User Manual
Section 3 - Configuration
Select
Enable
to enable Samba sharing, or
Disable
to disable it.
Enter a name to identify the device when sharing data.
Enter the name of the workgroup to share data with.
Samba:
NetBIOS Name:
Workgroup:
Samba
This page allows you to configure the router’s Samba file and printer sharing settings.
Page 47 / 88
43
D-Link DWR-922 User Manual
Section 3 - Configuration
Check the box to enable the Universal Plug and Play (UPnP)
feature.
UPnP:
UPnP
This page allows you to configure the router’s Universal Plug and Play (UPnP) settings. UPnP provides compatibility with various networking
equipment, software, and peripherals.
Page 48 / 88
44
D-Link DWR-922 User Manual
Section 3 - Configuration
Check the box to enable TR069.
Select the interface to use.
Enter your ACS username.
Enter your ACS password.
Enter the ACS URL.
Enter the CPE URI.
Enter the CPE Port.
Select either
Disable
or
Periodic
.
If you selected
Periodic
above, enter the interval here.
Select the
Month
,
Day
,
Year
,
Hour
,
Minute
, and
Second
.
Select
Enable
to enable Session Traversal Utilities for NAT (STUN).
If you selected
Enable
above, enter the STUN server address.
Enter the STUN server port.
TR069:
Interface:
Username:
Password:
ACS URL:
CPE URI:
CPE Port:
Inform
Configure:
Periodic Interval:
Schedule Time:
STUN Enable:
STUN Server
Address:
STUN Server
Port:
TR069
This page allows you to configure the router’s TR069 settings. TR-069 provides standardized remote device management for residential
gateways, which allows your router to be configured remotely by your ISP (if supported), or any service providing Auto-Configuration Servers
(ACS). If you wish to configure TR069 but lack the required settings, contact your Internet Service Provider (ISP).
Page 49 / 88
45
D-Link DWR-922 User Manual
Section 3 - Configuration
Enter the STUN username.
Enter the STUN password.
Enter the STUN UDP listen port.
STUN Username:
STUN Password:
STUN UDP Listen
Port:
Page 50 / 88
46
D-Link DWR-922 User Manual
Section 3 - Configuration
System
Displays the router’s current time.
Check the box to automatically update the time in accordance
with the currently configured NTP servers.
Select your time zone from the drop-down menu.
Check the box to enable daylight saving adjustments.
Enter the interval in seconds between time updates from the
currently configured NTP server.
Enter the address of the primary NTP server.
Enter the address of the secondary (backup) NTP server.
Time:
Sync with NTP
Servers:
Time Zone:
Daylight Saving
Settings:
Time Update
Interval:
Primary NTP
Server:
Secondary NTP
Server:
Time Settings
This section will help you set your time zone and specify an NTP (Network Time Protocol) server. Daylight Saving can also be configured to adjust
the time when needed.
19216811.live