Page 56 / 88
Scroll up to view Page 51 - 55
52
D-Link DWR-922 User Manual
Section 3 - Configuration
Displays the current log server status, if enabled, and its current
address.
The log is displayed below. Click
Refresh
to update it,
Clear Log
to
clear it, and the navigation buttons below to select different pages
in the log.
Log Server:
LOG FILES:
Log Info
This page allows you to check the status of the system log, and view it.
Page 57 / 88
53
D-Link DWR-922 User Manual
Section 3 - Configuration
Select whether to view the
WAN
statistics or the
LAN & Wireless
statistics. The selected information will appear below.
Status:
Statistics
This page displays the router’s WAN and local network traffic statistics.
Page 58 / 88
54
D-Link DWR-922 User Manual
Section 3 - Configuration
ARP Table Info
This page displays the Address Resolution Protocol (ARP) information. Each IP address is shown with its corresponding MAC address and
interface.
Page 59 / 88
55
D-Link DWR-922 User Manual
Section 3 - Configuration
Routing Table Info
This page displays the current routing tables.
Page 60 / 88
56
D-Link DWR-922 User Manual
Section 4 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
Step 2
- Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DWR-922 router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the DWR-922 for about 1 second. The Internet LED on the front will start to blink.
Step 3
- Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
WPS Button
19216811.live