Page 51 / 88
Scroll up to view Page 46 - 50
47
D-Link DWR-922 User Manual
Section 3 - Configuration
The username is always
admin
, and cannot be changed.
Enter the new password to access the configuration interface of
the router.
Re-enter the new password for verification.
To enable remote management, enter the IP address that the
router will use for remote management.
For each protocol, check the
Enable
box under either
LAN Access
,
WAN Access
, or both, and specify a
Port
.
Username:
Password:
Confirm
Password:
Remote
Management IP
Address:
Access
Management:
Administration
On this page you can configure the router’s username and password, the remote management address, and the various protocols with which to
access the network.
Page 52 / 88
48
D-Link DWR-922 User Manual
Section 3 - Configuration
To save the current configuration, click
Save
.
To load a previously saved configuration, click
Browse...
and
navigate to the saved configuration file. Lastly, click
Upload
Settings
.
To restore the router to its default settings, click
Restore Device
.
Note that any unsaved settings will be lost.
Click
Reboot
to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Save and Reboot
the Device:
System Settings
On this page you can save your current configuration settings to a local hard drive for backup and re-use, load previously saved settings, restore
the factory default settings, and reboot the device.
Page 53 / 88
49
D-Link DWR-922 User Manual
Section 3 - Configuration
Displays your router’s current firmware version and build date.
To upgrade your router’s firmware, click
Browse...
and navigate
to the firmware file on your computer’s hard drive. Click
Router
Upgrade
to start the upgrade process.
Firmware
Information:
Firmware
Update:
Firmware Update
This page displays your router’s current firmware version, and allows you to upgrade your router’s firmware.
Page 54 / 88
50
D-Link DWR-922 User Manual
Section 3 - Configuration
To save a copy of the system log to your local hard drive, click
Save
.
Check the boxes for each information type you want to include in
the system log.
Check the box to enable remote logging.
If you checked the box to enable remote logging, enter the IP
address of the log server.
Save Log File to
Local Hard Drive:
Log Type:
Log Enable:
Remote Log
Server IP:
System Log
This page allows you to configure your log settings, and save your log to a local hard drive.
Page 55 / 88
51
D-Link DWR-922 User Manual
Section 3 - Configuration
Device Info
This page provides general information about your router and Internet connection.
19216811.live