31

D-Link DWR-512 User Manual

Section 3 - Configuration

Select this box to enable the DHCP server on your router.

Enter the range of IPs for the DHCP server to use to

assign IP addresses to devices on your network.

Enter lease time for IP address assignments.

Enter the primary DNS IP Address that

will be assigned to DHCP clients.

Enter the secondary DNS IP Address that

will be assigned to DHCP clients.

Enter the primary WINS IP Address that

will be assigned to DHCP clients.

Enter the secondary WINS IP Address that

will be assigned to DHCP clients.

Enable DHCP Server:

DHCP IP Address

Range:

DHCP Lease Time:

Primary DNS IP

Address:

Secondary DNS IP

Address:

Primary WINS IP

Address:

Secondary WINS IP

Address:

DHCP Server Settings

The DWR-512 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the

network that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses,

which is automatically assigned to the clients on the network. After modifying any settings, click

Save Settings

to save your changes.

32

D-Link DWR-512 User Manual

Section 3 - Configuration

Message Service

If your ISP provides

SMS

service, you can check and send messages from this page.

Click this button to view SMS messages

that you have received.

Click this button to create a new message to send.

SMS Inbox:

Create Message:

Deletes the selected SMS message.

Opens a Create Message window to reply

to the selected SMS message.

Opens a Create Message windows to forward the

selected SMS message to another recipient.

Click this button to check for new messages.

Delete:

Reply:

Forward:

Refresh:

SMS Inbox

This page shows all messages that are stored on the SIM card. Select a message to display its contents in the SMS window. After you

read it, you can delete it, or reply to the sender. Click the

Refresh

button to update the list.

33

D-Link DWR-512 User Manual

Section 3 - Configuration

Create Message

This page allows you to send an SMS to your contacts. Just fill in the phone number of the recipient, and type the content of message. Then

push the “Send Message” button to send out this message. If you would like to add more than one recipient, you must put a semicolon (;)

between each of the phone numbers.

Type the phone number of the recipient.

Type the message that you would like to send.

Click this button to send the message.

Click this button to clear the message.

Receiver:

Text Message:

Sent Message:

Cancel:

34

D-Link DWR-512 User Manual

Section 3 - Configuration

Advanced

The device can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address

of the router. You can also allow the settings to run on a specified schedule. The Virtual Server function is also known as Port Forwarding.

After modifying any settings, click

Save Settings

to save your changes.

This contains a list of pre-defined services. You

can select a service, select a rule ID, then click

the

Copy to

button to copy the default settings

for that service to the specified rule ID.

Specifies which rule to copy the selected

Well known

service

settings to when you click the

Copy to

button.

Select a schedule to use and copy to the specified

rule ID when you click the

Copy to

button. You may

select

Always On

or use a specific schedule that

you have defined. To create and edit schedules,

please refer to “Schedules” on page 54.

Well-known Services:

ID:

Use schedule rule:

Virtual Server

The

ADVANCED

pages allow you to configure the more advanced settings of the router,

such as Virtual Server(Port Forwarding), MAC and URL filtering, and advanced wireless

and network settings. To view the Advanced configuration pages, click on

ADVANCED

at the top of the screen.

35

D-Link DWR-512 User Manual

Section 3 - Configuration

VIRTUAL SERVERS LIST

This identifies the rule.

Enter the last digits of the IP address of the

computer on your local network that you want to

allow the incoming service. In the next box, enter

the port number that you would like to open.

Tick the checkbox to enable the specified rule.

Specify the schedule rule number. To create

schedules, please refer to “Schedules” on page 54.

ID:

Server IP: Port:

Enable:

Schedule Rule #: