1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DWR-512
    5. /
  5. 5
Page 21 / 88 Scroll up to view Page 16 - 20
16
D-Link DWR-512 User Manual
Section 3 - Configuration
PPPoE
Choose this Internet connection if your ISP provides you PPPoE account. After modifying any settings, click
Save Settings
to save your
changes.
The username/account name that your ISP
provides to you for PPPoE dial-up.
Password that your ISP provides to you for PPPoE dial-up.
Fill in with the same password in Password field.
(Optional) Fill in if provided by your ISP.
(Optional) Fill in if provided by your ISP.
If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
MAC address of WAN interface. You can also copy MAC address of your PC
to its WAN interface by pressing
Clone Your PC’s MAC
button. The
Restore
MAC
button will reset the router to its default MAC address.
The amount of time of inactivity before disconnecting established PPPoE session.
Set it to zero or enable Auto-reconnect will disable this feature.
The default setting of PPPoE is 1492.
The device will dial-up PPPoE connection automatically.
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS Server:
Secondary DNS
Server:
MAC Address:
Maximum Idle Time:
Maximum
Transmission Unit
(MTU):
Auto-reconnect:
Page 22 / 88
17
D-Link DWR-512 User Manual
Section 3 - Configuration
PPTP
Choose this Internet connection if your ISP provides you PPTP account. After modifying any settings, click
Save Settings
to save your
changes.
Choose Static IP only if your ISP assigns you an IP
address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dial-up.
Password that your ISP provides to you for PPTP dial-up.
Fill in with the same password in Password field.
Choose
Always-on
when you want to establish PPTP connection
all the time. If you choose
Connect-on-demand
,
the device will
establish PPTP connection when local users want to surf Internet,
and disconnect if no traffic after time period of Maximum Idle Time.
The time of no activity to disconnect your PPTP session. Set
it to zero or choose Always-on to disable this feature.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Page 23 / 88
18
D-Link DWR-512 User Manual
Section 3 - Configuration
L2TP
Choose this Internet connection if your ISP provides you L2TP account. After modifying any settings, click
Save Settings
to save your
changes.
Choose Static IP only if your ISP assigns you an IP
address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
IP address of L2TP server.
User/account name that your ISP provides
to you for L2TP dial-up.
Password that your ISP provides to you for L2TP dial-up.
Fill in with the same password in Password field.
Choose Always-on when you want to establish L2TP
connection all the time. Choose Connect-on-demand
the device will establish L2TP connection when local
users want to surf Internet, and disconnect if no
traffic after time period of Maximum Idle Time.
The time of no activity to disconnect your L2TP session.
Set it to 0 or choose Always-on to disable this feature.
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Page 24 / 88
19
D-Link DWR-512 User Manual
Section 3 - Configuration
Fill in a name to identify the following 3G configuration.
(Optional) Fill in only if requested by ISP.
(Optional) Fill in only if requested by ISP.
Enter the number to be dialed.
Select PAP, CHAP, or Auto detection. The
default authentication method is Auto.
(Optional) Enter the APN information.
Enter the PIN associated with your SIM card.
Select Auto or Manual to decide whether
the routher should reconnect to your 3G
network automatically or manually.
Set the maximum time your connection can be idle
before disconnecting. Set it to 0 or choose Auto
in Reconnect Mode to disable this feature.
(Optional) Fill in if provided by your ISP.
If not, keep the default value.
(Optional) Fill in if provided by your ISP.
If not, keep the default value.
Account/Profile Name:
Username:
Password:
Dialed Number:
Authentication:
APN:
PIN:
Reconnect Mode:
Maximum Idle Time:
Primary DNS Server:
Secondary DNS
Server:
3G
Choose this Internet connection if you already use a SIM card for 3G Internet service from your Telecom company. The fields here may not
be necessary for your connection. The information on this page should only be used if required by your service provider. After modifying
any settings, click
Save Settings
to save your changes.
Page 25 / 88
20
D-Link DWR-512 User Manual
Section 3 - Configuration
Select Disable or Use LCP Echo Request
depending on the settings required by your ISP.
Activate this feature to use the Ethernet
WAN port as an additional LAN port.
Keep Alive:
Bridge Ethernet Ports:

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top