26

D-Link DWR-512 User Manual

Section 3 - Configuration

Select whether to use

WPA2 only

or

WPA

only

.

WPA2 only

is the most secure, provided

that all of your clients can support it.

Select whether to use the

TKIP

or

AES

cipher.

The

AES

cipher is the most secure, provided

that all of your clients can support it.

Enter the key/password you want to use for your

wireless network. The key must be 8 to 63 characters

long, and may only contain letters and numbers.

WPA Mode:

Cipher Type:

Network Key:

If you choose

WPA-Personal

, the following options will appear:

Select whether to use Open or Shared authentication.

Select whether to use

64-bit

or

128-bit

encryption.

Select which WEP key (1-4) to use as the default

key. This will also change the WEP Key text box

to that WEP key for your to configure(1-4).

Set the WEP key/password for your wireless network.

Based on whether you are using 64 or 128-bit encryption,

and whether you are using a HEX or ASCII key, you

will need to enter different numbers of characters for

your key, as indicated below the WEP Key text box.

ASCII keys may use letters and numbers only, and

HEX keys may use numbers 0-9 and letters A-F only.

Authentication:

WEP Encryption:

Default WEP Key:

WEP Key:

If you choose

WEP

, the following options will appear:

27

D-Link DWR-512 User Manual

Section 3 - Configuration

Select whether to use

WPA2 only

or

WPA

only

.

WPA2 only

is the most secure, provided

that all of your clients can support it.

Select whether to use the

TKIP

or

AES

cipher.

The

AES

cipher is the most secure, provided

that all of your clients can support it.

Enter the IP address of your RADIUS server.

Enter the port used for your RADIUS server.

Enter the Shared Secret/password

for your RADIUS server.

WPA Mode:

Cipher Type:

RADIUS Server IP

Address:

RADIUS Server Port:

RADIUS Server Shared

Secret:

If you choose

WPA-Enterprise

, the following options will appear:

28

D-Link DWR-512 User Manual

Section 3 - Configuration

Wi-Fi Protected Setup

To open the Wi-Fi Protected Setup page, click

Wi-Fi Protected Setup

.

The Wi-Fi Protected Setup page allows you to create a wireless connection between your

router and a device automatically by simply pushing a button or entering a PIN code.

You can also use Windows 7 to do initial configuration of your router by using the

Connect

to a network

wizard in Windows, and entering the WPS PIN/AP PIN of the router when

prompted. After modifying any settings, click

Save Settings

to save your changes.

29

D-Link DWR-512 User Manual

Section 3 - Configuration

Select whether you would like to enable

or disable WPS features.

If you use Windows 7’s

Connect to a network

wizard to do initial configuration of the router, you

will need to enter the WPS PIN/AP PIN into the

wizard when prompted. The factory default WPS PIN/

AP PIN is printed on a label located on the bottom

of the router. You can click the

Generate New PIN

button to change it to a randomly generated PIN.

Select whether the WPS config mode should

be set to

Registrar

or

Enrollee

. In most cases,

this should be set to

Registrar

so that you can

use WPS to connect new wireless clients.

If this is set to

CONFIGURED

, the router will be marked

as “already configured” to computers that try to use

WPS configuration, such as Windows 7’s

Connect

to a network

wizard. You can click the

Release

button to change the status to

UNCONFIGURED

to allow for WPS configuration of the router.

If this is set to

UNCONFIGURED

, you can click the

Set

button to change the status to

CONFIGURED

to block WPS configuration of the router.

This lets you choose whether to use the

Push

Button

connection method (PBC) or

PIN

method to

connect to a wireless client when the

Trigger

button

is clicked. If you choose the

PIN

method, you will

need to enter a 8-digit PIN number that the wireless

client need to use to connect to your router.

This will show the current WPS connection process status.

Click the

Trigger

button to initiate a WPS connection.

WPS:

AP PIN (also known as

WPS PIN):

Config Mode:

Config Status:

Config Method:

WPS Status:

30

D-Link DWR-512 User Manual

Section 3 - Configuration

This section will help you to change the internal network settings of your router and to configure the DHCP Server settings. After modifying

any settings, click

Save Settings

to save your changes.

Network Settings

Enter the IP address you want to use for the router. The

default IP address is

192.168.0.1

. If you change the

IP address, you will need to enter the new IP address

in your browser to get into the configuration utility.

Enter the

Subnet Mask

of the router. The

default subnet mask is

255.255.255.0

.

Enter the local domain name for your network.

Router IP Address:

Default Subnet Mask:

Local Domain Name:

Router Settings