19216811.live46
D-Link DWR-512 User Manual
Section 3 - Configuration
ADMINISTRATOR
Enter and confirm the password that the admin account
will use to access the router’s management interface.
REMOTE MANAGEMENT
Tick this check box to enable remote management.
Remote management allows the DWR-512 to be
configured over the Internet through a web browser.
A username and password will still be required
to access the Web-Management interface.
Enter the Internet IP address of the PC that has access
to the Broadband Router. If you enter an asterisk (*)
in this field, then anyone will be able to access the
Router. Adding an asterisk (*) into this field could
present a security risk and is not recommended.
This is the port number used to access the router. 8080 is
the port usually used for the Web-Management interface.
Admin
The
Admin
page allows you to change the Administrator password and enable Remote Management.
The admin has read/write access
while users only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying
any settings, click
Save Settings
to save your changes.
Admin Password:
Remote Management:
IP Allowed to Access:
Port:
Tools
The
TOOLS
pages allow you to adjust various system setting for your router, such as
the system time, firmware, and custom schedules. To view the Tools pages, click on
TOOLS
at the top of the screen.