D-Link DWR-116 Router Manual PDF (Setup & Configuration Guide)

Page 31 / 89 Scroll up to view Page 26 - 30

27

D-Link DWR-116 User Manual

Section 3 - Conﬁguration

If you chose GOOD, select whether to use a HEX or ASCII

password, then enter a password to use for your wireless

network. If you choose HEX, you will need to enter a 10 or 26

digit password using only hex characters (0-9, A-F). If you choose

ASCII, the password can be between 5 to 13 alphanumeric

characters. Click

This completes the Wireless Connection Setup Wizard. Click

Save

to save your changes and reboot the router.

Page 32 / 89

28

D-Link DWR-116 User Manual

Section 3 - Conﬁguration

Wireless Settings

This section will help you to manually configure the wireless

settings of your router. Please note that changes made on this

section may also need to be duplicated on your Wireless Client.

Select this checkbox to enable wireless access.

When you set this option, the following

parameters take eﬀect.

Also known as the SSID (Service Set Identiﬁer),

this is the name of your Wireless Local Area

Network (WLAN). Enter a name using up to

32 alphanumeric characters. The SSID is case-

sensitive. The default name is “dlink_DWR-116”.

B/G/N mixed: Enable this mode if your network

contains a mix of 802.11b and 802.11g devices.

G mode: Enable this mode if your network

has only 802.11g devices. If you have both

802.11b and 802.11g wireless clients, disable

this mode.

Click

Auto.Channel.Scan

to automatically select the channel that it will operate on. This option is recommended because the

router will choose the channel with the least amount of interference.

Choose the clearest channel to help optimize the performance and coverage of your wireless network. By default the channel is

set to 11. This can be changed to ﬁt the channel setting for an existing wireless network or to customize your wireless network.

Select

Invisible

if you do not want the SSID of your wireless network to be broadcast by the DWR-116. The SSID of your router

will not be seen by site survey utilities. Therefore while setting up your wireless clients, you will have to manually enter your

SSID to connect to the router.

Enable Wireless:

Wireless Network

Name:

802.11 Mode:

Auto Channel Scan:

Wireless Channel:

Visibility Status:

Page 33 / 89

29

D-Link DWR-116 User Manual

Section 3 - Conﬁguration

Security Mode:

This device supports three wireless security modes,

WEP

,

WPA-Personal

,

.WPA-Enterprise

or

None

.

WEP is the original wireless encryption standard.

WPA provides a higher level of security and WPA-

Personal does not require an authentication

server. When WPA-Enterprise is enabled, the router

uses EAP (802.1x) to authenticate clients via a

remote RADIUS server.

Click

Save.Settings

to save your changes, or click

Don’t.Save.Settings

to discard your changes.

Authentication:

WEP Encryption:

Default WEP

Key:

WEP Key:

Select whether to use Open or Shared

authentication.

Select whether to use 64-bit or 128-bit encryption.

Select which WEP key (1-4) to use as the default

key. This will also change the WEP Key text box to

that WEP key for your to conﬁgure(1-4).

Set the WEP key/password for your wireless

network. Based on whether you are using 64 or

128-bit encryption, and whether you are using a

HEX or ASCII key, you will need to enter diﬀerent

numbers of characters for your key, as indicated

below the WEP Key text box. ASCII keys may use

letters and numbers only, and HEX keys may use

numbers 0-9 and letters A-F only.

If you choose

WEP

, the following options will appear:

Page 34 / 89

30

D-Link DWR-116 User Manual

Section 3 - Conﬁguration

WPA Mode:

Cipher Type:

Network Key:

Select whether to use WPA2 only or WPA only.

WPA2 only is the most secure, provided that all

of your clients can support it.

Select whether to use the TKIP or AES cipher. The

AES cipher is the most secure, provided that all of

your clients can support it.

Enter the key/password you want to use for

your wireless network. The key must be 8 to 63

characters long, and may only contain letters and

numbers.

If you choose

WPA-Personal

, the following options will appear:

Page 35 / 89

31

D-Link DWR-116 User Manual

Section 3 - Conﬁguration

WPA Mode:

Cipher Type:

RADIUS Server IP

Address:

RADIUS Server

Port:

RADIUS Server

Shared

Secret:

Select whether to use WPA2 only or WPA only.

WPA2 only is the most secure, provided that all

of your clients can support it.

Select whether to use the TKIP or AES cipher. The

AES cipher is the most secure, provided that all of

your clients can support it.

Enter the IP address of your RADIUS server.

Enter the port used for your RADIUS server.

Enter the shared secret/password for your RADIUS

server.

If you choose

WPA-Enterprise

, the following options will appear:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share