Page 16 / 89
Scroll up to view Page 11 - 15
12
D-Link DWR-116 User Manual
Section 3 - Configuration
The default MAC Address is set to the Internet
port’s physical interface MAC address on the
broadband router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the
Clone
button to replace the Internet port’s MAC
address with the MAC address of your PC.
Enter the host name for your router or
computer.
Click
Next
to continue,
Prev
to go back to
the previous page or click
Cancel
to close the
wizard.
Mac Address:
Host Name:
DHCP.Connection.(Dynamic.IP.Address):
Fill in if provided by your ISP. If not, keep the
default value.
The username/account name that your ISP
provides to you for PPPoE dial-up.
Password that your ISP provides to you for
PPPoE dial-up.
(Optional) Fill in if provided by your ISP.
Click
Next
to continue,
Prev
to go back to
the previous page or click
Cancel
to close the
wizard.
IP Address:
Username:
Password:
Service Name:
Username./.Password.Connection.(PPPoE):
Page 17 / 89
13
D-Link DWR-116 User Manual
Section 3 - Configuration
Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
Enter the information provided by your ISP.
Enter the information provided by your ISP.
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dialup.
Password that your ISP provides to you for PPTP dial-up.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
User Name:
Password:
Username./.Password.Connection.(PPTP):
Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
Enter the information provided by your ISP.
Enter the information provided by your ISP.
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dialup.
Password that your ISP provides to you for PPTP dial-up.
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
User Name:
Password:
Username./.Password.Connection.(L2TP):
Page 18 / 89
14
D-Link DWR-116 User Manual
Section 3 - Configuration
(Optional) Fill in only if requested by ISP.
(Optional) Fill in only if requested by ISP.
Enter the number to be dialed.
Select PAP, CHAP, or Auto detection. The
default authentication method is Auto.
(Optional) Enter the APN information.
User Name:
Password:
Dialed Number:
Authentication:
APN:
3G/4G.LTE.Connection
Enter the IP address assigned to your network
connection.
Enter the subnet mask.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS
Address:
Secondary DNS
Address
Static.IP.Address.Connection
Page 19 / 89
15
D-Link DWR-116 User Manual
Section 3 - Configuration
You have completed the
Setup.Wizard
.
Click
Connect
to save your settings.
A popup will appear, to confirm your settings.
Click
OK
to save your settings.
Page 20 / 89
16
D-Link DWR-116 User Manual
Section 3 - Configuration
Manual Internet Connection Setup
Internet Connection Type
Several different Internet connection types can be selected
depending upon the specifications of your Internet Service
Provider (ISP).
Select the Internet connection type specified
by your Internet Service Provider (ISP). The
corresponding settings will be displayed
below. Please see the following pages for
details on how to configure these different
connection types.
This connection can serve as a backup for
your default connection. Click on the
Failover.
Setting.
dropdown box in order to configure
this setting. Please refer to page “Failover
Setting” on page 23 for more details on how to
configure settings.
My Internet
Connection is:
Failover Internet
Connection is:
19216811.live