17

D-Link DWR-116 User Manual

Section 3 - Configuration

Dynamic IP (DHCP)

(Optional) Required by some ISPs.

(Optional) Fill in with IP address of primary

DNS server.

(Optional) Fill in with IP address of secondary

DNS server.

You may need to change the Maximum

Transmission Unit (MTU) for optimal

performance. The default value is 1500.

The default MAC address is set to the Internet

port’s physical interface MAC address on the

broadband router. It is not recommended that

you change the default MAC address unless

required by your ISP.

You can use the

Clone.

button to replace the Internet port’s MAC

address with the MAC address of your PC.

This feature enables this product to renew

WAN IP address automatically when the lease

time is expiring.

Click

Save.Settings

to save your changes,

or click

Don’t.Save.Settings

to discard your

changes.

This section will help you to obtain IP address information

automatically from your ISP. Use this option if your ISP didn’t

provide you with IP address information and/or a username and

password.

Host Name:

Primary DNS

Server:

Secondary DNS

Server:

MTU (Maximum

Transmission

Unit):

MAC Address:

Auto-reconnect:

18

D-Link DWR-116 User Manual

Section 3 - Configuration

PPPoE

Choose this Internet connection if your ISP provides you with

a

PPPoE account.

The username/account name that your ISP

provides to you for PPPoE dial-up.

Password that your ISP provides to you for

PPPoE dial-up.

Fill in with the same password in Password field.

(Optional) Fill in if provided by your ISP.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing

the

Clone.

button.

The

Restore.MAC

button will reset the router to its default MAC address.

The amount of time of inactivity before disconnecting established PPPoE session. Setting it to zero or enabling

Reconnect.

Mode:.Always-on

setting will disable this feature.

You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default setting of PPPoE is 1492.

The device will dial-up PPPoE connection automatically.

Click

Save.Settings

to save your changes, or click

Don’t.Save.Settings

to discard your changes.

Username:

Password:

Verify Password:

Service Name:

IP Address:

Primary DNS Server:

Secondary DNS

Server:

MAC Address:

Maximum Idle Time:

Maximum

Transmission Unit

(MTU):

Auto-reconnect:

19

D-Link DWR-116 User Manual

Section 3 - Configuration

PPTP

Choose this Internet connection if your ISP provides you PPTP

account.

Choose Static IP only if your ISP assigns you an

IP address. Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

Enter the information provided by your ISP.

(Only applicable for Static IP PPTP.)

IP address of PPTP server.

User/account name that your ISP provides to you for PPTP dial-up.

Password that your ISP provides to you for PPTP dial-up.

Fill in with the same password in Password field.

Choose

Always-on

when you want to establish PPTP connection all the time. If you choose

Connect-on-demand

,

.

the device

will establish PPTP connection when local users want to surf the Internet, and disconnect if there is no traffic after the time

period set under Maximum Idle Time.

The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature.

Click

Save.Settings

to save your changes, or click

Don’t.Save.Settings

to discard your changes.

Address Mode:

PPTP IP Address:

PPTP Subnet

Mask:

PPTP Gateway

IP Address:

PPTP Server IP

Address:

Username:

Password:

Verify Password:

Reconnect

Mode:

Maximum Idle

Time:

20

D-Link DWR-116 User Manual

Section 3 - Configuration

L2TP

Choose this Internet connection if your ISP provides you L2TP

account.

Choose Static IP only if your ISP assigns you an

IP address. Otherwise, please choose Dynamic IP.

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

Enter the information provided by your ISP.

(Only applicable for Static IP L2TP.)

IP address of L2TP server.

User/account name that your ISP provides to you for L2TP dial-up.

Password that your ISP provides to you for L2TP dial-up.

Fill in with the same password in Password field.

Choose Always-on when you want to establish L2TP connection all the time. Choose Connect-on-demand and the device will

establish L2TP connection when local users want to surf Internet, and disconnect if no traffic after time period of Maximum Idle

Time.

The time of no activity to disconnect your L2TP session. Set it to zero or choose Always-on to disable this feature.

Click

Save.Settings

to save your changes, or click

Don’t.Save.Settings

to discard your changes.

Address Mode:

L2TP IP Address:

L2TP Subnet

Mask:

L2TP Gateway IP

Address:

L2TP Server IP

Address:

Username:

Password:

Verify Password:

Reconnect

Mode:

Maximum Idle

Time:

21

D-Link DWR-116 User Manual

Section 3 - Configuration

3G / 4G LTE

Choose this Internet connection if you already use a SIM card

for 3G/4G LTE Internet service from your mobile service provider

company. The fields here may not be necessary for your connection.

The information on this page should only be used if required by your

service provider.

(Optional) Fill in only if requested by ISP.

(Optional) Fill in only if requested by ISP.

Enter the number to be dialed.

PAP, CHAP, or Auto detection. The default

authentication method is Auto.

(Optional) Enter the APN information.

Enter the PIN associated with your SIM card.

Choose whether the device will reconnect to the 3G/4G network automatically or manually

The time of no activity required to disconnect the established 3G/4G LTE session. Set it to zero or choose Auto in Reconnect

Mode to disable.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

Disable or Use LCP Echo Request. This depends on ISP requirement.

Activate this feature to change Ethernet WAN port to LAN port.

Username:

Password:

Dialed Number:

Authentication:

APN:

PIN:

Reconnect Mode:

Maximum Idle

Time:

Primary DNS

Server:

Secondary DNS

Server:

Keep Alive:

Bridge Ethernet

Ports: