2

D-Link DWR-116 User Manual

Section 1 - Product Overview

Introduction

The D-Link Wireless N300 Multi-WAN Router allows users to access mobile broadband networks worldwide. Once

connected, users can transfer data and stream media. Simply connect your USB

modem to share your 3G/4G LTE Internet

connection through a secure 802.11n wireless network or using the 10/100 Ethernet port.

The Wireless N300 Multi-WAN Router can be installed quickly and easily almost anywhere. This router is great for situations

where an impromptu wireless network must be set up, or wherever conventional network access is unavailable. The

DWR-116 can even be installed in buses, trains, or boats, allowing passengers to check e-mail or chat online while

commuting.

3

D-Link DWR-116 User Manual

Section 1 - Product Overview

Hardware Overview

Back Panel

Port

Function

LAN.Port

Connects to wired computers or devices.

WAN.Port

Connects to the Internet.

Power.Port

Connects to the power adapter.

LAN.4

LAN.3

LAN.2

LAN.1

WAN

POWER

4

D-Link DWR-116 User Manual

Section 1 - Product Overview

Hardware Overview

Front Panel and LEDs

3G/4G.LTE

WAN

Wi-Fi

LAN.Ports.1.to.4

WPS.BUTTON

RESET.BUTTON

LED

Description

Color

Solid

Blinking

Blinking.(Fast)

3G/4G.LTE

Green

3G/4G LTE connection established

Data transmitting

-

WAN

Green

WAN connection established

Data transmitting

-

Wi-Fi

Green

Wi-Fi active and available

Data transmitting

Device in WPS mode

LAN.1.-.LAN.4

Green

Ethernet connection established

Data transmitting

-

Note

: WPS mode can be activated by pressing, and holding the WPS button until the Wi-Fi LED begins to flash rapidly. You can

find more details about activating WPS mode in the section titled “Wi-Fi Protected Setup” on page 32

5

D-Link DWR-116 User Manual

Section 1 - Product Overview

Hardware Overview

Top

Port

Function

USB.Port

Connects to 3G/4G LTE Modem Dongle

Antennas

External WiFi Antennas

USB.2±0.Port

External.Antennas

6

D-Link DWR-116 User Manual

Section 2 - Installation

Installation

This section will guide you through the installation process. Placement of the router is very important. Do not place the router

in an enclosed area such as a closet or cabinet, or in an attic or garage.

Connect to Your Network

Note:.

Ensure that your DWR-116 Wireless N300 Multi-WAN Router is disconnected and powered

off

before performing the

installation steps below.

1. Connect a USB modem to the

USB

port located on the top of the router.

2. Insert an Ethernet network cable into the

LAN

port on the back of the router. Plug the other end of the Ethernet cable into

the LAN port of your computer or laptop. The Ethernet LED will turn green if the Ethernet connection is successfully established.

Note:

The DWR-116 Wireless N300 Multi-WAN Router’s LAN ports are “Auto-MDI/MDIX.” Therefore, patch or crossover Ethernet

cables can be used.

3. Configure the device using the setup utility.