Page 51 / 89
Scroll up to view Page 46 - 50
47
D-Link DWR-116 User Manual
Section 3 - Configuration
Time
Displays the current time and date of the
DWR-116.
Select the appropriate
Time.Zone.
from the
drop-down box.
Select this checkbox to automatically
synchronize the DWR-116 with an Internet
time server.
Choose the NTP Server used for synchronizing
time and date.
Shows the result of the last time
synchronization.
Click
Save. Settings
to save your changes,
or click
Don’t.Save.Settings
to discard your
changes.
This section will help you set the time zone that you are in and
the NTP (Network Time Protocol) server. Daylight Saving can also
be configured to adjust the time when needed.
Time:
Time Zone:
Automatically
synchronize
with Internet
time server:
NTP Server
Used:
Sync. Result:
Page 52 / 89
48
D-Link DWR-116 User Manual
Section 3 - Configuration
Syslog
Select this box to send the router logs to a
Syslog server.
Enter the address of the Syslog server that will
be used to send the logs.
Click
Save.Settings
to save your changes,
or click
Don’t.Save.Settings
to discard your
changes.
The DWR-116 keeps a running log of events and activities
occurring on the router. You may send these logs to a SysLog
server on your network.
Enable Logging
to Syslog Server:
Syslog Server IP
Address:
Page 53 / 89
49
D-Link DWR-116 User Manual
Section 3 - Configuration
Email Settings
When this option is enabled, router activity
logs are e-mailed to a designated e-mail
address.
Enter the SMTP server IP address followed
by a colon and the port number (e.g.
123.123.123.1:25).
Enter the SMTP username.
Enter the SMTP password.
Enter the e-mail address where you would like
the e-mail sent to.
Enter a subject for the e-mail.
Click this button to access the e-mail log.
Click
Save.Settings
to save your changes,
or click
Don’t.Save.Settings
to discard your
changes.
Enable E-mail
Notification:
SMTP Sever IP
and Port:
SMTP
Username:
SMTP Password:
Send E-mail
Alert to:
E-mail Subject:
E-mail Log Now:
Email.Settings
allows you to send the system log files, router alert
messages, and firmware update notifications to an e-mail address.
Page 54 / 89
50
D-Link DWR-116 User Manual
Section 3 - Configuration
System
Use this option to save your current router
configuration settings to a file and onto your
computer. Click
Save
to open a file dialog,
and then select a location and file name for
the settings.
Use this option to load the previously saved
router configuration settings.
Browse to find
the saved file and then click
Upload.Settings
to transfer those settings to the router.
This option will restore all settings back to
their defaults. Any settings that have not been
backed up will be lost, including any rules that
you have created.
Save Settings
To Local Hard
Drive:
Load Settings
From Local Hard
Drive:
Restore To
Factory Default
Settings:
Here, you can save the current system settings onto the local
hard drive.
Page 55 / 89
51
D-Link DWR-116 User Manual
Section 3 - Configuration
Firmware
Displays your current firmware version.
Displays your current firmware date.
After you have downloaded the new firmware,
click
Browse
to locate the firmware on your
computer. Tick
Accept.unofficial.firmware.
if you want to update the DWR-116 with
unofficial firmware (not recommended).
Click
Upload
to start the firmware upgrade.
Here, you can upgrade the firmware of your router. Make sure
the firmware you want to use is on the local hard drive of the
computer and then click
Browse
to upload the file. Please check
the D-Link support site for firmware updates at
http://support±
dlink±com
. You can download firmware upgrades to your hard
drive from the D-Link support site.
Current
Firmware
Version:
Current
Firmware Date:
Browse:
19216811.live