Page 71 / 89
Scroll up to view Page 66 - 70
67
D-Link DWR-116 User Manual
Section 4 - Security
Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
Page 72 / 89
68
D-Link DWR-116 User Manual
Section 4 - Security
3. Highlight the wireless connection with Wi-Fi name (SSID) you would
like to connect to and click the
Connect
button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
5. Enter the same security key or passphrase (Wi-Fi password) that is
on your router and click
Connect
. You can also connect by pushing
the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
Page 73 / 89
69
D-Link DWR-116 User Manual
Section 4 - Security
WPS
The WPS feature of the DWR-116 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to
configure the WPS feature:
1. Click the
Start
button and select
Computer
from the Start menu.
2. Click
Network
on the left side.
Page 74 / 89
70
D-Link DWR-116 User Manual
Section 4 - Security
3. Double-click the DWR-116
4. Input the WPS PIN number (displayed in the WPS window on the
Router’s LCD screen or in the
Setup.
>
Wireless.Setup
menu in
the Router’s Web UI) and click
Next
.
Page 75 / 89
71
D-Link DWR-116 User Manual
Section 4 - Security
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click
Next
to continue.
19216811.live