DVG-N5402SP

User’s Manual

MAINTENANCE

D-Link Systems, Inc.

23

Preamble Type:

It defines the length of the preamble which sends out with a packet format. Specify an

appropriate preamble type for your network. If you do not know which one to select, it is recommended to

keep the default setting.

3-2-3-2 Access Control

The Access Control setting provides a service that you can control different access rights for different

wireless clients connected to your VoIP Router. The local and remote stations are limited to access the

Internet through your AP (Access Point) using MAC address of wireless client. Choose the appropriate

Access Control Services from the option of Access Control Mode.

ADVANCED

→

Advanced Wireless

→

Access Control

Access Control Mode:

Disable:

The VoIP Router does not response to any access rules. You are not allowed to modify the

configuration in this page.

Allow:

If you select

Allow

, only those wireless clients whose MAC addresses are in the WLAN

FILTER LIST are allowed to connect to your AP (Access Point).

Deny:

If you select

Deny

, only those wireless clients whose MAC addresses are in the WLAN FILTER

LIST are restricted and denied to connect to your AP (Access Point).

MAC:

Specify the MAC address for permitting or blocking the access to your AP (Access Point).

Comment:

Enter the comments.

DVG-N5402SP

User’s Manual

MAINTENANCE

D-Link Systems, Inc.

24

3-2-4 Advanced Network

3-2-4-1 ALG

ALG (Application Layer Gateway) is also named the third generation firewall. When the user on the trusted

network wants to connect to the untrusted network (Internet), the application will be guided to the proxy

server of the firewall. The proxy server disguises the actual server on the Internet. It can estimate the

request, and decides the permission or deny of the request according to the rule in a suit of unit network

service.

ADVANCED

→

Advanced Network

→

ALG

DVG-N5402SP

User’s Manual

MAINTENANCE

D-Link Systems, Inc.

25

3-2-4-2 Static Routing

Build static routes within an internal network. These routes will not apply to the Internet.

ADVANCED

→

Advanced Network

→

Static Routing

Destination Network Address

: The destination IP address of the router.

Subnet Mask

: The subnet mask of the destination IP address.

Use Gateway IP Address

: The gateway IP address of the router.

Use Interface

: The interface name of the router output port.

You can only choose

Use Gateway IP Address

or

Use Interface

.

Click

Apply

to save the settings.

3-2-4-4 UPNP

DVG-N5402SP

User’s Manual

MAINTENANCE

D-Link Systems, Inc.

26

ADVANCED

→

Advanced Network

→

UPNP

Enable UPNP:

Check the box to enable the IP traffic of the VOIP Router to pass through an Internet

sharing device.

DVG-N5402SP

User’s Manual

MAINTENANCE

D-Link Systems, Inc.

27

3-2-5 Schedule

To access the Schedules window, click the schedules button in the Advanced directory.

You can add schedules in this page and then apply them to Parental Control.

Name:

Enter a Name for the schedule.

Day(s):

Use the radio buttons to click the desired Day(s), either All Week or Select Day(s) (in which case

you must tick the checkboxes for the desired individual days of the week),

All Day

–

24 hrs:

Tick to apply the rules for whole day.

Start Time:

Start time in hour and minute (24 Hour Time)

End Time:

End Time in hour and minute (24 Hour Time)

Click Apply to see the entry in the Schedule Rule table. To remove an entry in the table, select the entry,

and click the Delete button. To modify an entry in the table, select the entry, click the Edit button, make the

desired changes, and then click the Apply button.