DVG-N5402SP
User’s Manual
Appendix
D-Link Systems, Inc.
41
Appendix
Product Features
WAN
One 10/100/1000Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port
Support Static IP, DHCP, PPPoE, PPTP, L2TP, 3G USB Adapter, and Bridge.
QoS: IP TOS (Type of Services) and DiffServ (Differentiated Services) for both SIP
signaling and RTP
NAT Traversal : Port Forwarding, STUN and Outbound Proxy
NTP: (Network Time Protocol RFC 1305), Accepts up to 3 Time Server
Time Zone Support
MAC Address Clone
RTP Packet Summary : packet sent, packet received, packet loss for voice quality
analysis
LAN
Four 10/100/1000Mbps auto-negotiation, auto-crossover RJ 45 Ethernet ports
Support router and bridge mode (NAT mode and Non-NAT mode)
DHCP server
Voice Features
SIP (RFC3261) compatible
Voice codecs : G.711 a /ulaw, G.726, G.729A, G.723.1,
G722, iLBC
CNG (Comfort Noise Generation)
VAD (Voice Activity Detection)
G.165/G.168 echo cancellation
Adjustable Jitter Buffer and programmable Gain Control
In-Band DTMF, Out-Of-Band DTMF relay (RFC2833, SIP INFO)
Multiple SIP Proxy server entries with failover mechanism
Polarity reversal generation (FXS)
T.30 (G.III) / Real time T.38 / Secured T.38 FAX relay
DTMF, FSK (Bellcore & ETSI) Caller ID generation.
Support Caller ID Restriction (CLIR)
Digit Map for dial plan
Speed Dial
Local phone book for peer-to-peer calling
E.164 Numbering & ENUM support
Hot-Line, Warm-Line support
Single Number / Account (reprehensive number) for multiple ports
Call features:
o
Call Hold, Call Waiting, Call Pickup
o
Call Forward - Unconditional, Busy, No Answer
o
Call Transfer - Unattended, Attended
o
Three Way Calling (Media Server required)
Analogue interface
o
Connector : RJ-11
o
Signaling protocol : Loop Start
Configuration & Maintenance
Configuration methods:
o
Web
19216811.live