1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSR-500N
    5. /
  5. 50
Page 246 / 270 Scroll up to view Page 241 - 245
Unified Services Router
User Manual
244
Failed to set AES encrypt key
DEBUG
ICMP: %u.%u.%u.%u:
INFO
AES %s Decrypt Test Duration: %d:%d,
hard ? Hard : Soft,
DEBUG
ICMP: %u.%u.%u.%u: Source
INFO
Failed to set AES encrypt key
DEBUG
Wrong address mask %u.%u.%u.%u
from
INFO
Failed to set AES encrypt key
DEBUG
Redirect from %u.%u.%u.%u on %s
about
INFO
Failed to set AES encrypt key
DEBUG
IP: routing cache hash table of %u
buckets, %ldKbytes,
INFO
Failed to set AES encrypt key
DEBUG
source route option %u.%u.%u.%u ->
%u.%u.%u.%u,
INFO
Failed to set DES encrypt key[%d], i
DEBUG
Wrong address mask %u.%u.%u.%u
from
INFO
Failed to set DES decrypt key[%d], i
DEBUG
Redirect from %u.%u.%u.%u on %s
about
INFO
Failed to set DES encrypt key[%d], i
DEBUG
source route option
INFO
Failed to set DES decrypt key[%d], i
DEBUG
ICMP: %u.%u.%u.%u:
INFO
Failed to set DES encrypt key
DEBUG
ICMP: %u.%u.%u.%u: Source
INFO
Failed to set DES decrypt key
DEBUG
Wrong address mask %u.%u.%u.%u
from
INFO
Failed to set DES encrypt key
DEBUG
Redirect from %u.%u.%u.%u on %s
about
INFO
Failed to set DES decrypt key
DEBUG
IP: routing cache hash table of %u
buckets, %ldKbytes,
INFO
AES Software Test:
DEBUG
source route option %u.%u.%u.%u ->
%u.%u.%u.%u,
INFO
AES Software Test %s, aesSoftTest(0)
? Failed : Passed
DEBUG
IPsec: device unregistering: %s, dev-
>name
INFO
AES Hardware Test:
DEBUG
IPsec: device down: %s, dev->name
INFO
AES Hardware Test %s,
aesHardTest(0) ? Failed : Passed
DEBUG
mark: only supports 32bit mark
WARNIN
G
3DES Software Test:
DEBUG
ipt_time: invalid argument
WARNIN
G
3DES Software Test %s,
des3SoftTest(0) ? Failed : Passed
DEBUG
ipt_time: IPT_DAY didn't matched
WARNIN
G
3DES Hardware Test:
DEBUG
./Logs_kernel.txt:45:KERN_WARNING
WARNIN
G
3DES Hardware Test %s,
des3HardTest(0) ? Failed : Passed
DEBUG
./Logs_kernel.txt:59:KERN_WARNING
WARNIN
G
DES Software Test:
DEBUG
ipt_LOG: not logging via system
console
WARNIN
G
DES Software Test %s, desSoftTest(0)
? Failed : Passed
DEBUG
%s: wrong options length: %u, fname,
opt_len
WARNIN
G
DES Hardware Test:
DEBUG
%s: options rejected: o[0]=%02x,
o[1]=%02x,
WARNIN
G
DES Hardware Test %s,
desHardTest(0) ? Failed : Passed
DEBUG
%s: wrong options length: %u,
WARNIN
G
SHA Software Test:
DEBUG
%s: options rejected: o[0]=%02x,
o[1]=%02x,
WARNIN
G
SHA Software Test %s, shaSoftTest(0)
? Failed : Passed
DEBUG
%s: don't know what to do: o[5]=%02x,
WARNIN
G
SHA Hardware Test:
DEBUG
%s: wrong options length: %u, fname,
opt_len
WARNIN
G
SHA Hardware Test %s,
shaHardTest(0) ? Failed : Passed
DEBUG
%s: options rejected: o[0]=%02x,
o[1]=%02x,
WARNIN
G
MD5 Software Test:
DEBUG
%s: wrong options length: %u,
WARNIN
G
Page 247 / 270
Unified Services Router
User Manual
245
MD5 Software Test %s, md5SoftTest(0)
? Failed : Passed
DEBUG
%s: options rejected: o[0]=%02x,
o[1]=%02x,
WARNIN
G
MD5 Hardware Test:
DEBUG
%s: don't know what to do: o[5]=%02x,
WARNIN
G
MD5 Hardware Test %s,
md5HardTest(0) ? Failed : Passed
DEBUG
*** New port %d ***, ntohs(expinfo-
>natport)
WARNIN
G
AES Software Test: %d iterations, iter
DEBUG
** skb len %d, dlen %d,(*pskb)->len,
WARNIN
G
AES Software Test Duration: %d:%d,
DEBUG
********** Non linear skb
WARNIN
G
AES Hardware Test: %d iterations, iter
DEBUG
End of sdp %p, nexthdr
WARNIN
G
AES Hardware Test Duration: %d:%d,
DEBUG
%s: unknown pairwise cipher %d,
WARNIN
G
3DES Software Test: %d iterations, iter
DEBUG
%s: unknown group cipher %d,
WARNIN
G
3DES Software Test Duration: %d:%d,
DEBUG
%s: unknown SIOCSIWAUTH flag %d,
WARNIN
G
3DES Hardware Test: %d iterations, iter
DEBUG
%s: unknown SIOCGIWAUTH flag %d,
WARNIN
G
3DES Hardware Test Duration: %d:%d,
DEBUG
%s: unknown algorithm %d,
WARNIN
G
DES Software Test: %d iterations, iter
DEBUG
%s: key size %d is too large,
WARNIN
G
DES Software Test Duration: %d:%d,
DEBUG
try_module_get failed
\
WARNIN
G
DES Hardware Test: %d iterations, iter
DEBUG
%s: request_irq failed, dev->name
WARNIN
G
DES Hardware Test Duration: %d:%d,
DEBUG
try_module_get failed
WARNIN
G
SHA Software Test: %d iterations, iter
DEBUG
try_module_get failed
\
WARNIN
G
SHA Software Test Duration: %d:%d,
DEBUG
%s: unknown pairwise cipher %d,
WARNIN
G
SHA Hardware Test: %d iterations, iter
DEBUG
%s: unknown group cipher %d,
WARNIN
G
SHA Hardware Test Duration: %d:%d,
DEBUG
%s: unknown SIOCSIWAUTH flag %d,
WARNIN
G
MD5 Software Test: %d iterations, iter
DEBUG
%s: unknown SIOCGIWAUTH flag %d,
WARNIN
G
MD5 Software Test Duration: %d:%d,
DEBUG
%s: unknown algorithm %d,
WARNIN
G
MD5 Hardware Test: %d iterations, iter
DEBUG
%s: key size %d is too large,
WARNIN
G
MD5 Hardware Test Duration: %d:%d,
DEBUG
unable to load %s,
scan_modnames[mode]
WARNIN
G
./pnac/src/pnac/linux/kernel/xcalibur.c:2
09:#define DEBUG_PRINTK
printk
DEBUG
Failed to mkdir /proc/net/madwifi
WARNIN
G
bcmDeviceInit: registration failed
DEBUG
try_module_get failed
WARNIN
G
bcmDeviceInit: pCdev Add failed
DEBUG
%s: request_irq failed, dev->name
WARNIN
G
REG Size == 8 Bit
DEBUG
too many virtual ap's (already got %d),
sc->sc_nvaps
WARNIN
G
Value = %x ::: At Page = %x : Addr =
%x
DEBUG
%s: request_irq failed, dev->name
WARNIN
G
REG Size == 16 Bit
DEBUG
rix %u (%u) bad ratekbps %u mode
%u,
WARNIN
G
Page 248 / 270
Unified Services Router
User Manual
246
Value = %x ::: At Page = %x : Addr =
%x
DEBUG
cix %u (%u) bad ratekbps %u mode
%u,
WARNIN
G
REG Size == 32 Bit
DEBUG
%s: no rates for %s?,
WARNIN
G
Value = %x ::: At Page = %x : Addr =
%x
DEBUG
no rates yet! mode %u, sc-
>sc_curmode
WARNIN
G
REG Size == 64 Bit
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNIN
G
REG Size is not in 8/16/32/64
DEBUG
dst cache overflow
WARNIN
G
Written Value = %x ::: At Page = %x :
Addr = %x
DEBUG
Neighbour table overflow.
WARNIN
G
bcm_ioctl :Unknown Ioctl Case :
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNIN
G
=========Register Dump for Port
Number # %d=========,port
DEBUG
martian destination %u.%u.%u.%u
from
WARNIN
G
%s : Read Status=%s
data=%#x,regName[j],
DEBUG
martian source %u.%u.%u.%u from
WARNIN
G
%s : Read Status=%s
data=%#x,regName[j],
DEBUG
ll header:
WARNIN
G
powerDeviceInit: device registration
failed
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNIN
G
powerDeviceInit: adding device failed
DEBUG
dst cache overflow
WARNIN
G
%s: Error: Big jump in pn number.
TID=%d, from %x %x to %x %x.
DEBUG
Neighbour table overflow.
WARNIN
G
%s: The MIC is corrupted. Drop this
frame., __func__
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNIN
G
%s: The MIC is OK. Still use this frame
and update PN., __func__
DEBUG
martian destination %u.%u.%u.%u
from
WARNIN
G
ADDBA send failed: recipient is not a
11n node
DEBUG
martian source %u.%u.%u.%u from
WARNIN
G
Cannot Set Rate: %x, value
DEBUG
ll header:
WARNIN
G
Getting Rate Series: %x,vap-
>iv_fixed_rate.series
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNIN
G
Getting Retry Series: %x,vap-
>iv_fixed_rate.retries
DEBUG
dst cache overflow
WARNIN
G
IC Name: %s,ic->ic_dev->name
DEBUG
Neighbour table overflow.
WARNIN
G
usage: rtparams rt_idx <0|1> per
<0..100> probe_intval <0..100>
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNIN
G
usage: acparams ac <0|3> RTS <0|1>
aggr scaling <0..4> min mbps <0..250>
DEBUG
martian source %u.%u.%u.%u from
WARNIN
G
usage: hbrparams ac <2> enable <0|1>
per_low <0..50>
DEBUG
ll header:
WARNIN
G
%s(): ADDBA mode is AUTO, __func__
DEBUG
martian destination %u.%u.%u.%u
from
WARNIN
G
%s(): Invalid TID value, __func__
DEBUG
%u.%u.%u.%u sent an invalid ICMP
WARNIN
G
%s(): ADDBA mode is AUTO, __func__
DEBUG
dst cache overflow
WARNIN
G
%s(): Invalid TID value, __func__
DEBUG
Neighbour table overflow.
WARNIN
G
%s(): Invalid TID value, __func__
DEBUG
host %u.%u.%u.%u/if%d ignores
WARNIN
G
Addba status IDLE
DEBUG
martian destination %u.%u.%u.%u
WARNIN
Page 249 / 270
Unified Services Router
User Manual
247
from
G
%s(): ADDBA mode is AUTO, __func__
DEBUG
martian source %u.%u.%u.%u from
WARNIN
G
%s(): Invalid TID value, __func__
DEBUG
ll header:
WARNIN
G
Error in ADD- no node available
DEBUG
Unable to create ip_set_list
ERROR
%s(): Channel capabilities do not match,
chan flags 0x%x,
DEBUG
Unable to create ip_set_hash
ERROR
%s: cannot map channel to mode; freq
%u flags 0x%x,
DEBUG
ip_conntrack_in: Frag of proto %u
(hook=%u),
ERROR
ic_get_currentCountry not initialized yet
DEBUG
Unable to register netfilter socket
option
ERROR
Country ie is %c%c%c,
DEBUG
Unable to create ip_conntrack_hash
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
Unable to create ip_conntrack slab
cache
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
Unable to create ip_expect slab cache
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
Unable to create ip_set_iptreeb slab
cache
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
Unable to create ip_set_iptreed slab
cache
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
%s: cannot allocate space for
%scompressor, fname,
ERROR
%s: wrong state transition from %d to
%d,
DEBUG
%s: cannot allocate space for MPPC
history,
ERROR
ieee80211_deliver_l2uf: no buf available
DEBUG
%s: cannot allocate space for MPPC
history,
ERROR
%s: %s, vap->iv_dev->name, buf
/*
NB: no
*/
DEBUG
%s: cannot load ARC4 module, fname
ERROR
%s: [%s] %s, vap->iv_dev->name,
DEBUG
%s: cannot load SHA1 module, fname
ERROR
%s: [%s] %s, vap->iv_dev->name,
ether_sprintf(mac), buf
DEBUG
%s: CryptoAPI SHA1 digest size too
small, fname
ERROR
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
%s: cannot allocate space for SHA1
digest, fname
ERROR
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: trying to write outside history
ERROR
[%s:%s] discard %s information
element, %s,
DEBUG
%s%d: trying to write outside history
ERROR
[%s:%s] discard information element,
%s,
DEBUG
%s%d: trying to write outside history
ERROR
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: too big uncompressed packet:
%d,
ERROR
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: encryption negotiated but not
an
ERROR
HBR list
dumpNode\tAddress\t\t\tState\tTrigger\t
Block
DEBUG
%s%d: error - not an
MPPC or MPPE
frame
ERROR
Nodes
informationAddress\t\t\tBlock\t\tDroped
VI frames
DEBUG
Kernel doesn't provide ARC4 and/or
SHA1 algorithms
ERROR
%d\t
%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2
x\t%s\t%s\t%s,
DEBUG
PPP: not interface or channel??
ERROR
%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2
x\t%s\t\t%d,
DEBUG
PPP: no memory (VJ compressor)
ERROR
[%d]\tFunction\t%s, j, ni-
>node_trace[i].funcp
DEBUG
failed to register PPP device (%d), err
ERROR
Page 250 / 270
Unified Services Router
User Manual
248
[%d]\tMacAddr\t%s, j,
DEBUG
PPP: no memory (VJ comp pkt)
ERROR
[%d]\tDescp\t\t%s, j, ni-
>node_trace[i].descp
DEBUG
PPP: no memory (comp pkt)
ERROR
[%d]\tValue\t\t%llu(0x%llx), j, ni-
>node_trace[i].value,
DEBUG
ppp: compressor dropped pkt
ERROR
ifmedia_add: null ifm
DEBUG
PPP: no memory (fragment)
ERROR
Adding entry for
DEBUG
PPP: VJ uncompressed error
ERROR
ifmedia_set: no match for 0x%x/0x%x,
DEBUG
ppp_decompress_frame: no memory
ERROR
ifmedia_set: target
DEBUG
ppp_mp_reconstruct bad seq %u <
%u,
ERROR
ifmedia_set: setting to
DEBUG
PPP: couldn't register device %s (%d),
ERROR
ifmedia_ioctl: switching %s to , dev-
>name
DEBUG
ppp: destroying ppp struct %p but
dead=%d
ERROR
ifmedia_match: multiple match for
DEBUG
ppp: destroying undead channel %p !,
ERROR
<unknown type>
DEBUG
PPP: removing module but units
remain!
ERROR
desc->ifmt_string
DEBUG
PPP: failed to unregister PPP device
ERROR
mode %s, desc->ifmt_string
DEBUG
%s: cannot allocate space for
%scompressor, fname,
ERROR
<unknown subtype>
DEBUG
%s: cannot allocate space for MPPC
history,
ERROR
%s, desc->ifmt_string
DEBUG
%s: cannot allocate space for MPPC
history,
ERROR
%s%s, seen_option++ ? , : ,
DEBUG
%s: cannot load ARC4 module, fname
ERROR
%s%s, seen_option++ ? , : ,
DEBUG
%s: cannot load SHA1 module, fname
ERROR
%s, seen_option ? > :
DEBUG
%s: CryptoAPI SHA1 digest size too
small, fname
ERROR
%s: %s, dev->name, buf
DEBUG
%s: cannot allocate space for SHA1
digest, fname
ERROR
%s: no memory for sysctl table!,
__func__
DEBUG
%s%d: trying to write outside history
ERROR
%s: failed to register sysctls!, vap-
>iv_dev->name
DEBUG
%s%d: trying to write outside history
ERROR
Atheros HAL assertion failure: %s: line
%u: %s,
DEBUG
%s%d: trying to write outside history
ERROR
ath_hal: logging to %s %s,
ath_hal_logfile,
DEBUG
%s%d: too big uncompressed packet:
%d,
ERROR
ath_hal: logging disabled
DEBUG
%s%d: encryption negotiated but not
an
ERROR
%s%s, sep, ath_hal_buildopts[i]
DEBUG
%s%d: error - not an
MPPC or MPPE
frame
ERROR
ath_pci: No devices found, driver not
installed.
DEBUG
Kernel doesn't provide ARC4 and/or
SHA1 algorithms
ERROR
---:%d pri:%d qd:%u ad:%u sd:%u
tot:%u amp:%d %02x:%02x:%02x,
DEBUG
PPP: not interface or channel??
ERROR
SC Pushbutton Notify on %s::%s,dev-
>name,vap->iv_dev->name
DEBUG
PPP: no memory (VJ compressor)
ERROR
Could not find Board Configuration Data
DEBUG
failed to register PPP device (%d), err
ERROR
Could not find Radio Configuration data
DEBUG
PPP: no memory (comp pkt)
ERROR
%s: No device, __func__
DEBUG
ppp: compressor dropped pkt
ERROR
ath_ahb: No devices found, driver not
installed.
DEBUG
PPP: no memory (VJ comp pkt)
ERROR
PKTLOG_TAG %s:proc_dointvec failed,
__FUNCTION__
DEBUG
PPP: no memory (comp pkt)
ERROR
PKTLOG_TAG %s:proc_dointvec failed,
DEBUG
PPP: no memory (fragment)
ERROR

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top