1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSR-500N
    5. /
  5. 48
Page 236 / 270 Scroll up to view Page 231 - 235
Unified Services Router
User Manual
234
Invalid config data
ERROR
Facility: Kernel
Log Message
Severity
Log Message
Severity
DNAT: multiple ranges no longer
supported
DEBUG
%s: %s%s:%d -> %s:%d %s,
DEBUG
DNAT: Target size %u wrong for %u
ranges,
DEBUG
%s: %s%s:%d %s,
DEBUG
DNAT: wrong table %s, tablename
DEBUG
%s: Failed to add WDS MAC: %s, dev-
>name,
DEBUG
DNAT: hook mask 0x%x bad,
hook_mask
DEBUG
%s: Device already has WDS mac
address attached,
DEBUG
%s%d: resetting MPPC/MPPE
compressor,
DEBUG
%s: Added WDS MAC: %s, dev-
>name,
DEBUG
%s%d: wrong offset value: %d,
DEBUG
%s: WDS MAC address %s is not
known by this interface,
DEBUG
%s%d: wrong length of match value:
%d,
DEBUG
[madwifi] %s() : Not enough space.,
__FUNCTION__
DEBUG
%s%d: too big offset value: %d,
DEBUG
Returning to chan %d, ieeeChan
DEBUG
%s%d: cannot decode offset value,
DEBUG
WEP
DEBUG
%s%d: wrong length code: 0x%X,
DEBUG
AES
DEBUG
%s%d: short packet (len=%d),
__FUNCTION__,
DEBUG
AES_CCM
DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG
CKIP
DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG
TKIP
DEBUG
PPPIOCDETACH file->f_count=%d,
DEBUG
%s: cannot map channel to mode; freq
%u flags 0x%x,
DEBUG
PPP: outbound frame not passed
DEBUG
%s: %s, vap->iv_dev->name, buf
DEBUG
PPP: VJ decompression error
DEBUG
%s: [%s] %s, vap->iv_dev->name,
DEBUG
PPP: inbound frame not passed
DEBUG
%s: [%s] %s, vap->iv_dev->name,
ether_sprintf(mac), buf
DEBUG
PPP: reconstructed packet
DEBUG
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
PPP: no memory for
DEBUG
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
missed pkts %u..%u,
DEBUG
[%s:%s] discard %s information
element, %s,
DEBUG
%s%d: resetting MPPC/MPPE
compressor,
DEBUG
[%s:%s] discard information element,
%s,
DEBUG
%s%d: wrong offset value: %d,
DEBUG
[%s:%s] discard %s frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: wrong length of match value:
%d,
DEBUG
[%s:%s] discard frame, %s, vap-
>iv_dev->name,
DEBUG
%s%d: too big offset value: %d,
DEBUG
ifmedia_add: null ifm
DEBUG
%s%d: cannot decode offset value,
DEBUG
Adding entry for
DEBUG
%s%d: wrong length code: 0x%X,
DEBUG
ifmedia_set: no match for 0x%x/0x%x,
DEBUG
%s%d: short packet (len=%d),
__FUNCTION__,
DEBUG
ifmedia_set: target
DEBUG
%s%d: bad sequence number: %d,
expected: %d,
DEBUG
ifmedia_set: setting to
DEBUG
Page 237 / 270
Unified Services Router
User Manual
235
%s%d: bad sequence number: %d,
expected: %d,
DEBUG
ifmedia_ioctl: no media found for 0x%x,
DEBUG
PPPIOCDETACH file->f_count=%d,
DEBUG
ifmedia_ioctl: switching %s to , dev-
>name
DEBUG
PPP: outbound frame not passed
DEBUG
ifmedia_match: multiple match for
DEBUG
PPP: VJ decompression error
DEBUG
<unknown type>
DEBUG
PPP: inbound frame not passed
DEBUG
desc->ifmt_string
DEBUG
PPP: reconstructed packet
DEBUG
mode %s, desc->ifmt_string
DEBUG
PPP: no memory for
DEBUG
<unknown subtype>
DEBUG
missed pkts %u..%u,
DEBUG
%s, desc->ifmt_string
DEBUG
%s: INC_USE_COUNT, now %d,
__FUNCTION__, mod_use_count \
DEBUG
%s%s, seen_option++ ? , : ,
DEBUG
%s: DEC_USE_COUNT, now %d,
__FUNCTION__, mod_use_count \
DEBUG
%s%s, seen_option++ ? , : ,
DEBUG
PPPOL2TP %s:
_fmt,
DEBUG
%s, seen_option ? > :
DEBUG
PPPOL2TP: --> %s, __FUNCTION__)
DEBUG
%s: %s, dev->name, buf
DEBUG
PPPOL2TP: <-- %s, __FUNCTION__)
DEBUG
%s: no memory for sysctl table!,
__func__
DEBUG
%s: recv: , tunnel->name
DEBUG
%s: no memory for VAP name!,
__func__
DEBUG
%s: xmit:, session->name
DEBUG
%s: failed to register sysctls!, vap-
>iv_dev->name
DEBUG
%s: xmit:, session->name
DEBUG
%s: no memory for new proc entry
(%s)!, __func__,
DEBUG
%s: module use_count is %d,
__FUNCTION__, mod_use_count
DEBUG
%s: 0x%p len %u, tag, p, len
DEBUG
PPPOL2TP %s:
_fmt,
DEBUG
%03d:, i
DEBUG
PPPOL2TP: --> %s, __FUNCTION__)
DEBUG
%02x, ((u_int8_t *)p)[i]
DEBUG
PPPOL2TP: <-- %s, __FUNCTION__)
DEBUG
first difference at byte %u, i
DEBUG
%s: recv: , tunnel->name
DEBUG
%s: , t->name
DEBUG
%s: xmit:, session->name
DEBUG
FAIL: ieee80211_crypto_newkey failed
DEBUG
%s: xmit:, session->name
DEBUG
FAIL: ieee80211_crypto_setkey failed
DEBUG
PPPOL2TP %s:
_fmt,
DEBUG
FAIL: unable to allocate skbuff
DEBUG
PPPOL2TP: --> %s, __FUNCTION__)
DEBUG
FAIL: wep decap failed
DEBUG
PPPOL2TP: <-- %s, __FUNCTION__)
DEBUG
FAIL: decap botch; length mismatch
DEBUG
%s: recv: , tunnel->name
DEBUG
FAIL: decap botch; data does not
compare
DEBUG
%s: xmit:, session->name
DEBUG
FAIL: wep encap failed
DEBUG
%s: xmit:, session->name
DEBUG
FAIL: encap data length mismatch
DEBUG
IRQ 31 is triggered
DEBUG
FAIL: encrypt data does not compare
DEBUG
[%s:%d] , __func__, __LINE__\
DEBUG
PASS
DEBUG
\t[R%s %#0x %#0x 0x%08x%08x],
(status == ERROR ? # : ), page, addr,
(uint32_t)(*pValue >> 32),
(uint32_t)(*pValue & 0xffffffff)
DEBUG
%u of %u 802.11i WEP test vectors
passed, pass, total
DEBUG
\t[W%s %#0x %#0x 0x%08x%08x],
(status == ERROR ? # : ), page, addr,
(uint32_t)(value >> 32), (uint32_t)(value
& 0xffffffff)
DEBUG
%s: 0x%p len %u, tag, p, len
DEBUG
%s: mac_add
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
%03d:, i
DEBUG
Page 238 / 270
Unified Services Router
User Manual
236
%s: mac_del
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
%02x, ((u_int8_t *)p)[i]
DEBUG
%s: mac_kick
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
first difference at byte %u, i
DEBUG
%s: mac_undefined
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
%s: , t->name
DEBUG
%s: addr_add
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: ieee80211_crypto_newkey failed
DEBUG
%s: addr_del
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: ieee80211_crypto_setkey failed
DEBUG
%s: mac_undefined
%02X:%02X:%02X:%02X:%02X:%02X,
dev->name, addr[0], addr[1], addr[2],
addr[3], addr[4], addr[5]
DEBUG
FAIL: unable to allocate skbuff
DEBUG
%s: set_float %d;%d,
DEBUG
FAIL: ccmp encap failed
DEBUG
IRQ 32 is triggered
DEBUG
FAIL: encap data length mismatch
DEBUG
ip_finish_output2: No header cache and
no neighbour!
DEBUG
FAIL: encrypt data does not compare
DEBUG
a guy asks for address mask. Who is it?
DEBUG
FAIL: ccmp decap failed
DEBUG
icmp v4 hw csum failure)
DEBUG
FAIL: decap botch; length mismatch
DEBUG
expire>> %u %d %d %d, expire,
DEBUG
FAIL: decap botch; data does not
compare
DEBUG
expire++ %u %d %d %d, expire,
DEBUG
PASS
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash,
DEBUG
%u of %u 802.11i AES-CCMP test
vectors passed, pass, total
DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG
%s: 0x%p len %u, tag, p, len
DEBUG
ip_rt_advice: redirect to
DEBUG
%03d:, i
DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG
%02x, ((u_int8_t *)p)[i]
DEBUG
udp cork app bug 2)
DEBUG
first difference at byte %u, i
DEBUG
udp cork app bug 3)
DEBUG
ieee80211_crypto_newkey failed
DEBUG
udp v4 hw csum failure.)
DEBUG
ieee80211_crypto_setkey failed
DEBUG
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG
unable to allocate skbuff
DEBUG
UDP: bad checksum. From
%d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG
tkip enmic failed
DEBUG
%s: lookup policy [list] found=%s,
DEBUG
enmic botch; length mismatch
DEBUG
%s: called: [output START],
__FUNCTION__
DEBUG
enmic botch
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_dst, family)
DEBUG
tkip encap failed
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_src, family)
DEBUG
encrypt phase1 botch
DEBUG
Page 239 / 270
Unified Services Router
User Manual
237
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
DEBUG
encrypt data length mismatch
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
DEBUG
encrypt data does not compare
DEBUG
a guy asks for address mask. Who is it?
DEBUG
tkip decap failed
DEBUG
icmp v4 hw csum failure)
DEBUG
decrypt phase1 botch
DEBUG
expire>> %u %d %d %d, expire,
DEBUG
decrypt data does not compare
DEBUG
expire++ %u %d %d %d, expire,
DEBUG
decap botch; length mismatch
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash,
DEBUG
decap botch; data does not compare
DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG
tkip demic failed
DEBUG
ip_rt_advice: redirect to
DEBUG
802.11i TKIP test vectors passed
DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG
%s, buf
DEBUG
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG
Atheros HAL assertion failure: %s: line
%u: %s,
DEBUG
UDP: bad checksum. From
%d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG
ath_hal: logging to %s %s,
ath_hal_logfile,
DEBUG
a guy asks for address mask. Who is it?
DEBUG
ath_hal: logging disabled
DEBUG
fib_add_ifaddr: bug: prim == NULL
DEBUG
%s%s, sep, ath_hal_buildopts[i]
DEBUG
fib_del_ifaddr: bug: prim == NULL
DEBUG
ath_pci: No devices found, driver not
installed.
DEBUG
expire>> %u %d %d %d, expire,
DEBUG
_fmt, __VA_ARGS__
DEBUG
expire++ %u %d %d %d, expire,
DEBUG
%s: Warning, using only %u entries in
%u key cache,
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash,
DEBUG
%s: TX99 support enabled, dev->name
DEBUG
rt_bind_peer(0) @%p,
DEBUG
%s:grppoll Buf allocation failed
,__func__
DEBUG
ip_rt_advice: redirect to
DEBUG
%s: %s: unable to start recv logic,
DEBUG
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG
%s: %s: unable to start recv logic,
DEBUG
%s: lookup policy [list] found=%s,
DEBUG
%s: no skbuff, __func__
DEBUG
%s: called: [output START],
__FUNCTION__
DEBUG
%s: hardware error; resetting, dev-
>name
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_dst, family)
DEBUG
%s: rx FIFO overrun; resetting, dev-
>name
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl4_src, family)
DEBUG
%s: unable to reset hardware: '%s'
(HAL status %u)
DEBUG
%s: flow dst=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_dst, family)
DEBUG
%s: unable to start recv logic, dev-
>name
DEBUG
%s: flow src=%s, __FUNCTION__,
XFRMSTRADDR(fl->fl6_src, family)
DEBUG
%s: %s: unable to reset hardware: '%s'
(HAL status %u),
DEBUG
a guy asks for address mask. Who is it?
DEBUG
%s: %s: unable to start recv logic,
DEBUG
icmp v4 hw csum failure)
DEBUG
ath_mgtstart: discard, no xmit buf
DEBUG
expire>> %u %d %d %d, expire,
DEBUG
%s: [%02u] %-7s , tag, ix, ciphers[hk-
>kv_type]
DEBUG
expire++ %u %d %d %d, expire,
DEBUG
%02x, hk->kv_val[i]
DEBUG
rt_cache @%02x: %u.%u.%u.%u, hash,
DEBUG
mac %s, ether_sprintf(mac)
DEBUG
rt_bind_peer(0) @%p,
NET_CALLER(iph)
DEBUG
%s , sc->sc_splitmic ? mic : rxmic
DEBUG
ip_rt_advice: redirect to
DEBUG
%02x, hk->kv_mic[i]
DEBUG
Page 240 / 270
Unified Services Router
User Manual
238
ip_rt_bug: %u.%u.%u.%u ->
%u.%u.%u.%u, %s,
DEBUG
txmic
DEBUG
UDP: short packet: From
%u.%u.%u.%u:%u %d/%d to
%u.%u.%u.%u:%u,
DEBUG
%02x, hk->kv_txmic[i]
DEBUG
UDP: bad checksum. From
%d.%d.%d.%d:%d to
%d.%d.%d.%d:%d ulen %d,
DEBUG
%s: unable to update h/w beacon
queue parameters,
DEBUG
REJECT: ECHOREPLY no longer
supported.
DEBUG
%s: stuck beacon; resetting (bmiss
count %u),
DEBUG
ipt_rpc: only valid for PRE_ROUTING,
FORWARD, POST_ROUTING,
LOCAL_IN and/or LOCAL_OUT targets.
DEBUG
move data from NORMAL to XR
DEBUG
ip_nat_init: can't setup rules.
DEBUG
moved %d buffers from NORMAL to
XR, index
DEBUG
ip_nat_init: can't register in hook.
DEBUG
move buffers from XR to NORMAL
DEBUG
ip_nat_init: can't register out hook.
DEBUG
moved %d buffers from XR to
NORMAL, count
DEBUG
ip_nat_init: can't register adjust in hook.
DEBUG
%s:%d %s, __FILE__, __LINE__,
__func__
DEBUG
ip_nat_init: can't register adjust out
hook.
DEBUG
%s:%d %s, __FILE__, __LINE__,
__func__
DEBUG
ip_nat_init: can't register local out hook.
DEBUG
%s: no buffer (%s), dev->name,
__func__
DEBUG
ip_nat_init: can't register local in hook.
DEBUG
%s: no skbuff (%s), dev->name,
__func__
DEBUG
ipt_hook: happy cracking.
DEBUG
%s: HAL qnum %u out of range, max
%u!,
DEBUG
ip_conntrack: can't register pre-routing
defrag hook.
DEBUG
grppoll_start: grppoll Buf allocation
failed
DEBUG
ip_conntrack: can't register local_out
defrag hook.
DEBUG
%s: HAL qnum %u out of range, max
%u!,
DEBUG
ip_conntrack: can't register pre-routing
hook.
DEBUG
%s: AC %u out of range, max %u!,
DEBUG
ip_conntrack: can't register local out
hook.
DEBUG
%s: unable to update hardware queue
DEBUG
ip_conntrack: can't register local in
helper hook.
DEBUG
%s: bogus frame type 0x%x (%s), dev-
>name,
DEBUG
ip_conntrack: can't register postrouting
helper hook.
DEBUG
ath_stoprecv: rx queue 0x%x, link %p,
DEBUG
ip_conntrack: can't register post-routing
hook.
DEBUG
%s: %s: unable to reset channel %u
(%u MHz)
DEBUG
ip_conntrack: can't register local in
hook.
DEBUG
%s: %s: unable to restart recv logic,
DEBUG
ip_conntrack: can't register to sysctl.
DEBUG
%s: unable to allocate channel table,
dev->name
DEBUG
ip_conntrack_rtsp v
IP_NF_RTSP_VERSION
loading
DEBUG
%s: unable to allocate channel table,
dev->name
DEBUG
ip_conntrack_rtsp: max_outstanding
must be a positive integer
DEBUG
%s: unable to collect channel list from
HAL;
DEBUG
ip_conntrack_rtsp: setup_timeout must
be a positive integer
DEBUG
R (%p %llx) %08x %08x %08x %08x
%08x %08x %c,
DEBUG
ip_conntrack_rtsp: ERROR registering
port %d, ports[i]
DEBUG
T (%p %llx) %08x %08x %08x %08x
%08x %08x %08x %08x %c,
DEBUG
ip_nat_rtsp v IP_NF_RTSP_VERSION
loading
DEBUG
%s: no memory for sysctl table!,
__func__
DEBUG
%s: Sorry! Cannot find this match
option., __FILE__
DEBUG
%s: no memory for device name
storage!, __func__
DEBUG

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top