1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSR-500N
    5. /
  5. 49
Page 241 / 270 Scroll up to view Page 236 - 240
Unified Services Router
User Manual
239
ipt_time loading
DEBUG
%s: failed to register sysctls!, sc-
>sc_dev->name
DEBUG
ipt_time unloaded
DEBUG
%s: mac %d.%d phy %d.%d, dev-
>name,
DEBUG
ip_conntrack_irc: max_dcc_channels
must be a positive integer
DEBUG
5 GHz radio %d.%d 2 GHz radio
%d.%d,
DEBUG
ip_conntrack_irc: ERROR registering
port %d,
DEBUG
radio %d.%d, ah->ah_analog5GhzRev
>> 4,
DEBUG
ip_nat_h323:
ip_nat_mangle_tcp_packet
DEBUG
radio %d.%d, ah->ah_analog5GhzRev
>> 4,
DEBUG
ip_nat_h323:
ip_nat_mangle_udp_packet
DEBUG
%s: Use hw queue %u for %s traffic,
DEBUG
ip_nat_h323: out of expectations
DEBUG
%s: Use hw queue %u for CAB traffic,
dev->name,
DEBUG
ip_nat_h323: out of RTP ports
DEBUG
%s: Use hw queue %u for beacons,
dev->name,
DEBUG
ip_nat_h323: out of TCP ports
DEBUG
Could not find Board Configuration
Data
DEBUG
ip_nat_q931: out of TCP ports
DEBUG
Could not find Radio Configuration
data
DEBUG
ip_nat_ras: out of TCP ports
DEBUG
ath_ahb: No devices found, driver not
installed.
DEBUG
ip_nat_q931: out of TCP ports
DEBUG
_fmt, __VA_ARGS__
DEBUG
ip_conntrack_core: Frag of proto %u.,
DEBUG
_fmt, __VA_ARGS__
DEBUG
Broadcast packet!
DEBUG
xlr8NatIpFinishOutput: Err.. skb2 ==
NULL !
DEBUG
Should bcast: %u.%u.%u.%u-
>%u.%u.%u.%u (sk=%p, ptype=%u),
DEBUG
xlr8NatSoftCtxEnqueue: Calling
xlr8NatIpFinishOutput () .., status
DEBUG
ip_conntrack version %s (%u buckets,
%d max)
DEBUG
xlr8NatSoftCtxEnqueue:
xlr8NatIpFinishOutput () returned [%d],
status
DEBUG
ERROR registering port %d,
DEBUG
icmpExceptionHandler: Exception!
DEBUG
netfilter PSD loaded - (c) astaro AG
DEBUG
fragExceptionHandler: Exception!
DEBUG
netfilter PSD unloaded - (c) astaro AG
DEBUG
algExceptionHandler: Exception!
DEBUG
%s , SELF
DEBUG
dnsExceptionHandler: Exception!
DEBUG
%s , LAN
DEBUG
IPsecExceptionHandler: Exception!
DEBUG
%s , WAN
DEBUG
ESP Packet Src:%x Dest:%x Sport:%d
dport:%d secure:%d spi:%d isr:%p,
DEBUG
TRUNCATED
DEBUG
xlr8NatConntrackPreHook: We found
the valid context,
DEBUG
SRC=%u.%u.%u.%u
DST=%u.%u.%u.%u ,
DEBUG
xlr8NatConntrackPreHook: Not a
secured packet.
DEBUG
LEN=%u TOS=0x%02X
PREC=0x%02X TTL=%u ID=%u ,
DEBUG
xlr8NatConntrackPreHook: isr=[%p],
pIsr
DEBUG
FRAG:%u , ntohs(ih->frag_off) &
IP_OFFSET
DEBUG
xlr8NatConntrackPreHook:
secure=[%d], secure
DEBUG
TRUNCATED
DEBUG
Context found for ESP %p,pFlowEntry-
>post.pIsr[0]
DEBUG
PROTO=TCP
DEBUG
xlr8NatConntrackPreHook: New
connection.
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
xlr8NatConntrackPostHook:
postSecure=[%d] postIsr=[%p %p],
DEBUG
SPT=%u DPT=%u ,
DEBUG
proto %d spi %d <-------> proto %d spi
%d,pPktInfo->proto,pPktInfo->spi,
DEBUG
SEQ=%u ACK=%u ,
DEBUG
IPSEC_INF Clock skew detected
DEBUG
Page 242 / 270
Unified Services Router
User Manual
240
WINDOW=%u , ntohs(th->window)
DEBUG
IPSEC_ERR [%s:%d]: Max (%d) No of
SA Limit reached,
DEBUG
RES=0x%02x ,
(u8)(ntohl(tcp_flag_word(th) &
TCP_RESERVED_BITS) >> 22)
DEBUG
IPSEC_ERR [%s:%d]: Max (%d) No of
SA Limit reached,
DEBUG
URGP=%u , ntohs(th->urg_ptr)
DEBUG
IPSEC_ERR [%s:%d]: time(secs): %u
DEBUG
TRUNCATED
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
%02X, op[i]
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
PROTO=UDP
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
SPT=%u DPT=%u LEN=%u ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
SPT=%u DPT=%u LEN=%u ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
PROTO=ICMP
DEBUG
unknown oid '%s', varName
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
could not find oid pointer for '%s',
varName
DEBUG
TYPE=%u CODE=%u , ich->type, ich-
>code
DEBUG
unRegistering IPsecMib
.....
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
ID=%u SEQ=%u ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
PARAMETER=%u ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
GATEWAY=%u.%u.%u.%u ,
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
MTU=%u , ntohs(ich->un.frag.mtu)
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
PROTO=AH
DEBUG
ERROR: Failed to add entry to IPsec
sa table
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
unknown oid '%s', varName
DEBUG
SPI=0x%x , ntohl(ah->spi)
DEBUG
could not find oid pointer for '%s',
varName
DEBUG
PROTO=ESP
DEBUG
unRegistering IPsecMib
.....
DEBUG
INCOMPLETE [%u bytes] ,
DEBUG
. %u.%u.%u.%u, NIPQUAD(trt-
>rt_dst)
DEBUG
SPI=0x%x , ntohl(eh->spi)
DEBUG
%02x, *p
DEBUG
PROTO=%u , ih->protocol
DEBUG
. %u.%u.%u.%u, NIPQUAD(trt-
>rt_dst)
DEBUG
UID=%u , skb->sk->sk_socket->file-
>f_uid
DEBUG
%02x, *p
DEBUG
<%d>%sIN=%s OUT=%s , loginfo-
>u.log.level,
DEBUG
. %u.%u.%u.%u, NIPQUAD(trt-
>rt_dst)
DEBUG
level_string
DEBUG
%02x, *p
DEBUG
%sIN=%s OUT=%s ,
DEBUG
. %u.%u.%u.%u, NIPQUAD(trt-
>rt_dst)
DEBUG
%s , prefix == NULL ? loginfo->prefix :
prefix
DEBUG
%02x, *p
DEBUG
IN=
DEBUG
unable to register vIPsec kernel comp
to UMI
DEBUG
OUT=
DEBUG
unregistering VIPSECK from UMI
....
DEBUG
PHYSIN=%s , physindev->name
DEBUG
in vIPsecKIoctlHandler cmd - %d, cmd
DEBUG
Page 243 / 270
Unified Services Router
User Manual
241
PHYSOUT=%s , physoutdev->name
DEBUG
%s: Error. DST Refcount value less
than 1 (%d),
DEBUG
MAC=
DEBUG
for
%s DEVICE
refcnt: %d ,pDst-
>dev->name,
DEBUG
%02x%c, *p,
DEBUG
%s: Got Null m:%p *m:%p sa:%p
*sa:%p,__func__,ppBufMgr,
DEBUG
NAT: no longer support implicit source
local NAT
DEBUG
%s Got Deleted SA:%p
state:%d,__func__,pIPsecInfo,pIPsecIn
fo->state
DEBUG
NAT: packet src %u.%u.%u.%u -> dst
%u.%u.%u.%u,
DEBUG
%s: %s:
fmt, __FILE__,
__FUNCTION__ , ## args)
INFO
SNAT: multiple ranges no longer
supported
DEBUG
%s: %s:
fmt, __FILE__,
__FUNCTION__ , ## args)
INFO
format,##args)
DEBUG
ipt_TIME:
format, ## args)
INFO
version
DEBUG
IPT_ACCOUNT_NAME : checkentry()
wrong parameters (not equals existing
table parameters).
INFO
offset_before=%d, offset_after=%d,
correction_pos=%u, x->offset_before, x-
>offset_after, x->correction_pos
DEBUG
IPT_ACCOUNT_NAME : checkentry()
too big netmask.
INFO
ip_ct_h323:
DEBUG
IPT_ACCOUNT_NAME : checkentry()
failed to allocate %zu for new table
%s., sizeof(struct t_ipt_account_table),
info->name
INFO
ip_ct_h323: incomplete TPKT
(fragmented?)
DEBUG
IPT_ACCOUNT_NAME : checkentry()
wrong network/netmask.
INFO
ip_ct_h245: decoding error: %s,
DEBUG
account: Wrong netmask given by
netmask parameter (%i). Valid is 32 to
0., netmask
INFO
ip_ct_h245: packet dropped
DEBUG
IPT_ACCOUNT_NAME : checkentry()
failed to create procfs entry.
INFO
ip_ct_q931: decoding error: %s,
DEBUG
IPT_ACCOUNT_NAME : checkentry()
failed to register match.
INFO
ip_ct_q931: packet dropped
DEBUG
failed to create procfs entry .
INFO
ip_ct_ras: decoding error: %s,
DEBUG
MPPE/MPPC encryption/compression
module registered
INFO
ip_ct_ras: packet dropped
DEBUG
MPPE/MPPC encryption/compression
module unregistered
INFO
ERROR registering port %d,
DEBUG
PPP generic driver version
PPP_VERSION
INFO
ERROR registering port %d,
DEBUG
MPPE/MPPC encryption/compression
module registered
INFO
ipt_connlimit [%d]:
src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d %s,
DEBUG
MPPE/MPPC encryption/compression
module unregistered
INFO
ipt_connlimit [%d]:
src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d new,
DEBUG
PPP generic driver version
PPP_VERSION
INFO
ipt_connlimit: Oops: invalid ct state ?
DEBUG
PPPoL2TP kernel driver, %s,
INFO
ipt_connlimit: Hmm, kmalloc failed :-(
DEBUG
PPPoL2TP kernel driver, %s,
INFO
ipt_connlimit: src=%u.%u.%u.%u
mask=%u.%u.%u.%u
DEBUG
PPPoL2TP kernel driver, %s,
INFO
_lvl PPPOL2TP:
_fmt, ##args
DEBUG
failed to create procfs entry .
INFO
%02X, ptr[length]
DEBUG
proc dir not created ..
INFO
%02X, ((unsigned char *) m-
DEBUG
Initialzing Product Data modules
INFO
Page 244 / 270
Unified Services Router
User Manual
242
>msg_iov[i].iov_base)[j]
%02X, skb->data[i]
DEBUG
De initializing by \
INFO
_lvl PPPOL2TP:
_fmt, ##args
DEBUG
kernel UMI module loaded
INFO
%02X, ptr[length]
DEBUG
kernel UMI module unloaded
INFO
%02X, ((unsigned char *) m-
>msg_iov[i].iov_base)[j]
DEBUG
Loading bridge module
INFO
%02X, skb->data[i]
DEBUG
Unloading bridge module
INFO
_lvl PPPOL2TP:
_fmt, ##args
DEBUG
unsupported command %d, cmd
INFO
%02X, ptr[length]
DEBUG
Loading ifDev module
INFO
%02X, ((unsigned char *) m-
>msg_iov[i].iov_base)[j]
DEBUG
Unloading ifDev module
INFO
%02X, skb->data[i]
DEBUG
ERROR#%d in alloc_chrdev_region,
result
INFO
KERN_EMERG THE value read is
%d,value*/
DEBUG
ERROR#%d in cdev_add, result
INFO
KERN_EMERG Factory Reset button is
pressed
DEBUG
using bcm switch %s, bcmswitch
INFO
KERN_EMERG Returing error in INTR
registration
DEBUG
privlegedID %d wanporttNo: %d,
privlegedID,wanportNo
INFO
KERN_EMERG Initialzing Factory
defaults modules
DEBUG
Loading mii
INFO
Failed to allocate memory for
pSipListNode
DEBUG
Unloading mii
INFO
SIPALG: Memeory allocation failed for
pSipNodeEntryTbl
DEBUG
%s: Version 0.1
INFO
pkt-err %s, pktInfo.error
DEBUG
%s: driver unloaded, dev_info
INFO
pkt-err %s, pktInfo.error
DEBUG
wlan: %s backend registered, be-
>iab_name
INFO
pkt-err %s, pktInfo.error
DEBUG
wlan: %s backend unregistered,
INFO
%s Len=%d, msg, len
DEBUG
wlan: %s acl policy registered, iac-
>iac_name
INFO
%02x , ((uint8_t *) ptr)[i]
DEBUG
wlan: %s acl policy unregistered, iac-
>iac_name
INFO
End
DEBUG
%s, tmpbuf
INFO
CVM_MOD_EXP_BASE MISMATCH
cmd=%x base=%x, cmd,
DEBUG
VLAN2
INFO
op->sizeofptr = %ld, op->sizeofptr
DEBUG
VLAN3
INFO
opcode cmd = %x, cmd
DEBUG
VLAN4 <%d %d>,
INFO
modexp opcode received
DEBUG
%s: %s, dev_info, version
INFO
Memory Allocation failed
DEBUG
%s: driver unloaded, dev_info
INFO
modexpcrt opcode received
DEBUG
%s, buf
INFO
kmalloc failed
DEBUG
%s: %s (, dev_info, ath_hal_version
INFO
kmalloc failed
DEBUG
%s: driver unloaded, dev_info
INFO
kmalloc failed
DEBUG
%s: %s: mem=0x%lx, irq=%d
hw_base=0x%p,
INFO
kmalloc failed
DEBUG
%s: %s, dev_info, version
INFO
kmalloc Failed
DEBUG
%s: driver unloaded, dev_info
INFO
kmalloc failed
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
unknown cyrpto ioctl cmd received %x,
cmd
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
register_chrdev returned ZERO
DEBUG
%s: %s, dev_info, version
INFO
const char *descr, krb5_keyblock *k) {
DEBUG
%s: driver unloaded, dev_info
INFO
F password, &pdata
DEBUG
%s, buf
INFO
Page 245 / 270
Unified Services Router
User Manual
243
test key, key
DEBUG
%s: %s (, dev_info, ath_hal_version
INFO
pre-hashed key, key
DEBUG
%s: driver unloaded, dev_info
INFO
const char *descr, krb5_keyblock *k) {
DEBUG
%s: driver unloaded, dev_info
INFO
AES 128-bit key, &key
DEBUG
%s: Version 2.0.0
INFO
const char *descr, krb5_keyblock *k) {
DEBUG
%s: driver unloaded, dev_info
INFO
test key, key
DEBUG
%s: driver unloaded, dev_info
INFO
pre-hashed key, key
DEBUG
wlan: %s backend registered, be-
>iab_name
INFO
const char *descr, krb5_keyblock *k) {
DEBUG
wlan: %s backend unregistered,
INFO
128-bit AES key,&dk
DEBUG
wlan: %s acl policy registered, iac-
>iac_name
INFO
256-bit AES key, &dk
DEBUG
wlan: %s acl policy unregistered, iac-
>iac_name
INFO
WARNING:
DEBUG
%s: %s, dev_info, version
INFO
bwMonMultipathNxtHopSelect::
checking rates
DEBUG
%s: driver unloaded, dev_info
INFO
hop :%d dev:%s usableBwLimit = %d
currBwShare = %d lastHopSelected =
%d weightedHopPrefer = %d ,
DEBUG
%s: %s (, dev_info, ath_hal_version
INFO
1. selecting hop: %d lastHopSelected =
%d
, selHop, lastHopSelected
DEBUG
%s: driver unloaded, dev_info
INFO
4. hop :%d dev:%s usableBwLimit = %d
currBwShare = %d lastHopSelected =
%d weightedHopPrefer = %d ,
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
2. selecting hop: %d lastHopSelected =
%d
, selHop, lastHopSelected
DEBUG
%s: %s, dev_info, version
INFO
3. selecting hop: %d lastHopSelected =
%d
, selHop, lastHopSelected
DEBUG
%s: driver unloaded, dev_info
INFO
bwMonitor multipath selection enabled
DEBUG
ath_pci: switching rfkill capability %s,
INFO
bwMonitor multipath selection disabled
DEBUG
Unknown autocreate mode: %s,
INFO
weightedHopPrefer set to %d
,weightedHopPrefer
DEBUG
%s: %s: mem=0x%lx, irq=%d,
INFO
bwMonitor sysctl registration failed
DEBUG
%s: %s, dev_info, version
INFO
bwMonitor sysctl registered
DEBUG
%s: driver unloaded, dev_info
INFO
bwMonitor sysctl not registered
DEBUG
%s: %s, dev_info, version
INFO
Unregistered bwMonitor sysctl
DEBUG
%s: unloaded, dev_info
INFO
CONFIG_SYSCTL enabled ...
DEBUG
%s: %s, dev_info, version
INFO
Initialized bandwidth monitor ...
DEBUG
%s: unloaded, dev_info
INFO
Removed bandwidth monitor ...
DEBUG
%s: %s, dev_info, version
INFO
Oops.. AES_GCM_encrypt failed
(keylen:%u),key->cvm_keylen
DEBUG
%s: unloaded, dev_info
INFO
Oops.. AES_GCM_decrypt failed
(keylen:%u),key->cvm_keylen
DEBUG
failed to create procfs entry .
INFO
%s, msg
DEBUG
ICMP: %u.%u.%u.%u:
INFO
%02x%s, data[i],
DEBUG
ICMP: %u.%u.%u.%u: Source
INFO
Failed to set AES encrypt key
DEBUG
Wrong address mask %u.%u.%u.%u
from
INFO
Failed to set AES encrypt key
DEBUG
Redirect from %u.%u.%u.%u on %s
about
INFO
AES %s Encrypt Test Duration: %d:%d,
hard ? Hard : Soft,
DEBUG
IP: routing cache hash table of %u
buckets, %ldKbytes,
INFO
Failed to set AES encrypt key
DEBUG
source route option %u.%u.%u.%u ->
%u.%u.%u.%u,
INFO

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top