1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSR-500N
    5. /
  5. 46
Page 226 / 270 Scroll up to view Page 221 - 225
Unified Services Router
User Manual
224
Facility: Local0 (Wireless)
Log Message
Severity
Log Message
Severity
(node=%s) setting %s to val = %d
DEBUG
sqlite3QueryResGet failed
ERROR
Custom wireless event: '%s'
DEBUG
sqlite3QueryResGet failed
ERROR
Wireless event: cmd=0x%x len=%d
DEBUG
VAP(%s) set beacon interval failed
ERROR
New Rogue AP
(%02x:%02x:%02x:%02x:%02x:%02x)
detected
DEBUG
VAP(%s) set DTIM interval failed
ERROR
WPS session in progress, ignoring
enrolle assoc request
DEBUG
VAP(%s) set RTS Threshold failed
ERROR
ran query %s
DEBUG
VAP(%s) set Fragmentation Threshold
failed
ERROR
DBUpdate event: Table: %s opCode:%d
rowId:%d
DEBUG
VAP(%s) set Protection Mode failed
ERROR
%sing VAPs using profile %s
DEBUG
VAP(%s) set Tx Power failed
ERROR
%sing VAP %s
DEBUG
WDS Profile %s not found
ERROR
ran query %s
DEBUG
Failed to initalize WPS on %s
ERROR
%sing VAP instance %s
DEBUG
failed to get profile %s
ERROR
VAP(%s) set Short Preamble failed
DEBUG
could not initialize MGMT framework
ERROR
VAP(%s) set Short Retry failed
DEBUG
could not initialize MGMT framework
ERROR
VAP(%s) set Long Retry failed
DEBUG
dot11VapBssidUpdt SQL error: %s
ERROR
Decrypting context with key %s
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Unknown IAPP command %d received.
DEBUG
KDOT11_GET_PARAM(IEEE80211_I
OC_CHANNEL) failed
ERROR
unexpected reply from %d cmd=%d !
DEBUG
Failed to get the channel setting for %s
ERROR
unexpected reply from %d cmd=%d !
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
Recvied DOT11_EAPOL_KEYMSG
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
shutting down AP:%s
DEBUG
profile %s not found
ERROR
APCtx Found
DEBUG
sqlite3QueryResGet failed.Query:%s
ERROR
APCtx Not-Found
DEBUG
Interface name and policy must be
specified
ERROR
node not found *:*:*:%x:%x:%x
DEBUG
Interface name and policy must be
specified
ERROR
error installing unicast key for %s
DEBUG
invalid ACL type %d
ERROR
cmd =%d i_type =%d i_val=%d
DEBUG
interface name not specified
ERROR
join event for new node %s
DEBUG
interface name not specified
ERROR
wpa/rsn IE id %d/%d not supported
DEBUG
Invalid interface - %s specified
ERROR
wpa IE id %d not supported
DEBUG
buffer length not specified
ERROR
leave event for node %s
DEBUG
Invalid length(%d) specified
ERROR
NodeFree request for node : %s
DEBUG
failed created iappdLock
ERROR
installing key to index %d
DEBUG
failed to create cipher contexts.
ERROR
iReq.i_val : %d
DEBUG
unable to register to UMI
ERROR
pIfName : %s
DEBUG
iappSockInit() failed
ERROR
iReq.i_val : %d
DEBUG
iappInit got error, unregistering it with
UMI
ERROR
setting mode: %d
DEBUG
umiIoctl(UMI_COMP_UDOT11,%d,%d
) failed
ERROR
Global counter wrapped, re-generating...
DEBUG
umiIoctl(UMI_COMP_KDOT11,%d,%d
) failed
ERROR
Page 227 / 270
Unified Services Router
User Manual
225
Got
PNAC_EVENT_PREAUTH_SUCCESS
event for : %s
DEBUG
UDP failed, received Length is %d
ERROR
event for non-existent node %s
DEBUG
umiIoctl(UMI_COMP_KDOT11,
ERROR
PNAC_EVENT_EAPOL_START event
received
DEBUG
umiIoctl(UMI_COMP_UDOT11,%d,%d
) \
ERROR
PNAC_EVENT_EAPOL_LOGOFF event
received
DEBUG
umiIoctl(UMI_COMP_KDOT11,%d,%d
) \
ERROR
PNAC_EVENT_REAUTH event received
DEBUG
No IAPP Node found for req id %d
ERROR
PNAC_EVENT_AUTH_SUCCESS event
received
DEBUG
umiIoctl(UMI_COMP_UDOT11,%d,%d
) \
ERROR
PNAC_EVENT_PORT_STATUS_CHAN
GED event received
DEBUG
umiIoctl(UMI_COMP_KDOT11,%d,%d
) \
ERROR
unsupported event %d from PNAC
DEBUG
umiIoctl(UMI_COMP_UDOT11,%d,%d
) failed
ERROR
event for non-existent node %s. Create
new node.
DEBUG
UDP socket is not created
ERROR
Add new node to DOT11 Node list
DEBUG
UDP send failed
ERROR
Update dot11STA database
DEBUG
IAPP: socket (SOCK_STREAM) failed.
ERROR
Add PMKSA to the list
DEBUG
IAPP: TCP connect failed to %s.
ERROR
eapolRecvAuthKeyMsg: received key
message
DEBUG
cmd %d not supported.sender=%d
ERROR
node not found
DEBUG
umiIoctl(UMI_COMP_KDOT11,%d,%d
) failed
ERROR
eapolRecvKeyMsg: replay counter not
incremented
DEBUG
IAPP-CACHE-NOTIFY-REQUEST
send to
ERROR
eapolRecvKeyMsg: replay counter is not
same
DEBUG
./src/dot11/iapp/iappLib.c:1314:
ADP_ERROR (
ERROR
processing pairwise key message 2
DEBUG
BSSID value passed is NULL
ERROR
RSN IE matching: OK
DEBUG
reserved requestId is passed
ERROR
processing pairwise key message 4
DEBUG
interface name is NULL
ERROR
processing group key message 2
DEBUG
IP address value passed is NULL
ERROR
processing key request message from
client
DEBUG
opening receive UDP socket failed
ERROR
WPA version %2x %2x not supported
DEBUG
enabling broadcast for UDP socket
failed
ERROR
(%s) group cipher %2x doesn't match
DEBUG
opening receive TCP socket for new
AP failed
ERROR
(%s)Pairwise cipher %s not supported
DEBUG
./src/dot11/iapp/iappLib.c:1784:
ADP_ERROR(
ERROR
(%s) authentication method %d not
supported
DEBUG
./src/dot11/iapp/iappLib.c:1794:
ADP_ERROR(
ERROR
%s:Auth method=%s pairwise cipher=%s
IE size=%d
DEBUG
./src/dot11/iapp/iappLib.c:1803:
ADP_ERROR(
ERROR
WPA version %2x %2x not supported
DEBUG
failed created dot11dLock.
ERROR
Unable to obtain IE of type %d
DEBUG
failed initialize profile library.
ERROR
PTK state changed from %s to %s
DEBUG
failed to create cipher contexts.
ERROR
using PMKSA from cache
DEBUG
unable to register to UMI
ERROR
PTK GK state changed from %s to %s
DEBUG
could not create MIB tree
ERROR
GK state changed from %s to %s
DEBUG
unable to register to PNAC
ERROR
Sending PTK Msg1
DEBUG
Max registration attempts by DOT11 to
PNAC exceeded
ERROR
Sending PTK Msg3
DEBUG
Creation of EAP WPS Profile Failed
ERROR
Sending GTK Msg1
DEBUG
umiIoctl(UMI_COMP_IAPP,%d ) failed
ERROR
Page 228 / 270
Unified Services Router
User Manual
226
sending EAPOL pdu to PNAC...
DEBUG
DOT11_RX_EAPOL_KEYMSG:
unknown ifname %s
ERROR
creating pnac authenticator with values
%d %d - %s
DEBUG
cmd %d not supported.sender=%d
ERROR
Profile %s does not exist
DEBUG
inteface name passed is NULL
ERROR
IAPP initialized.
DEBUG
BSSID passed is NULL
ERROR
Encrypting context key=%s for
DEBUG
inteface name passed is NULL
ERROR
could not find access point context for
%s
DEBUG
unable to allocate memory for
DOT11_CTX
ERROR
join event for existing node %s
DEBUG
unable to install wme mapping on %s
ERROR
failed to send
PNAC_FORCE_AUTHORIZED "
DEBUG
unable to get %s mac address
ERROR
failed to send PNAC_AUTHORIZED "
DEBUG
Failed to set %s SSID
ERROR
failed to send
PNAC_VAR_KEY_AVAILABLE (TRUE) "
DEBUG
Failed to set SSID broadcast status
ERROR
failed to send PNAC_VAR_KEY_TX_EN
(TRUE) "
DEBUG
Failed to set PreAuth mode
ERROR
failed to send PNAC_VAR_KEY_TX_EN
(FALSE) "
DEBUG
unable to install key
ERROR
failed to send
PNAC_FORCE_AUTHORIZED "
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_AUTHMODE failed
ERROR
failed to send PNAC_AUTHORIZED "
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_PRIVACY failed
ERROR
mic verification: OK
DEBUG
wpaInit failed
ERROR
pnacIfConfig: Invalid supplicant"
DEBUG
dot11InstallProfile: unable to get
interface index
ERROR
Failed to process user request
DEBUG
adpHmacInit(%s) failed
ERROR
Failed to process user request - %s(%d)
DEBUG
interface %s not found
ERROR
pnacIfConfigUmiIoctl: umiIoctl failed
DEBUG
AP not found on %s
ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG
keyLen > PNAC_KEY_MAX_SIZE
ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG
Invalid profile name passed
ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG
Creation of WPS EAP Profile failed
ERROR
pnacKernNotifier: invalid PAE
configuration "
DEBUG
unsupported command %d
ERROR
From pnacEapDemoAuthRecv:
unsupported response "
DEBUG
device %s not found
ERROR
From pnacEapDemoAuthRecv: invalid
codes received
DEBUG
unsupported command %d
ERROR
From pnacRadXlateDemoRecv: received
unknown "
DEBUG
dot11NodeAlloc failed
ERROR
From pnacRadXlateDemoRecv: invalid
codes received
DEBUG
Getting WPA IE failed for %s
ERROR
Error from pnacRadXlateDemoRecv:
malloc failed
DEBUG
Getting WPS IE failed for %s
ERROR
From pnacRadXlateRadPktHandle:
received a non-supported"
DEBUG
Failed initialize authenticator for node
%s
ERROR
Only md5 authentication scheme
currently supported. "
DEBUG
Failed to get the system up time while
adding node %s
ERROR
Message from authenticator:
DEBUG
error creating PNAC port for node %s
ERROR
from pnacPDUXmit: bufsize = %d,
pktType = %d,"
DEBUG
dot11NodeAlloc failed
ERROR
pnacPDUXmit: sending eap packet. code
= %d, "
DEBUG
Invalid arguments.
ERROR
Page 229 / 270
Unified Services Router
User Manual
227
pnacRecvRtn: no corresponding pnac
port pae found
DEBUG
umiIoctl(UMI_COMP_IAPP,%d) failed
ERROR
sending unicast key
DEBUG
Invalid IE.
ERROR
sending broadcast key
DEBUG
umiIoctl(UMI_COMP_KDOT11_VAP,
%d ) failed
ERROR
from pnacAuthPAEDisconnected: calling
pnacTxCannedFail
DEBUG
umiIoctl(UMI_COMP_KDOT11,%d
,%d) failed
ERROR
from pnacAuthPAEForceUnauth: calling
pnacTxCannedFail
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WME_CWMIN failed
ERROR
state changed from %s to %s
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WME_CWMAX failed
ERROR
PNAC user comp id not set. dropping
event %d
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WME_AIFS failed
ERROR
sending event %d to %d
DEBUG
KDOT11_SET_PARAM:80211_IOC_
WME_TXOPLIMIT failed
ERROR
requesting keys informantion from %d
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WME_ACM failed
ERROR
pnacUmiPortPaeParamSet: error in
getting port pae
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WME failed
ERROR
pnacUmiPortPaeParamSet: invalid
param - %d
DEBUG
invalid group cipher %d
ERROR
pnacRecvASInfoMessage: Skey of length
%d set
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_MCASTCIPHER failed
ERROR
pnacRecvASInfoMessage: reAuthPeriod
set to: %d
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_MCASTKEYLEN failed
ERROR
pnacRecvASInfoMessage: suppTimeout
set to: %d
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_UCASTCIPHERS failed
ERROR
PORT SUCCESSFULLY DESTROYED
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_KEYMGTALGS failed
ERROR
creating physical port for %s
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_WPA failed
ERROR
pnacAuthInit: using defualt
pnacAuthParams
DEBUG
unknow cipher type = %d
ERROR
pnacSuppInit: using defualt
pnacSuppParams
DEBUG
umiIoctl(UMI_COMP_IAPP,%d) failed
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
invalid media value=%d
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
invalid mediaOpt value=%d
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
invalid mode value=%d
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
dot11PnacIfCreate failed
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
wpaPRF failed
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
Error generating global key counter
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
wpaCalcMic: unsupported key
descriptor version
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
integrity failed. need to stop all stations
"
ERROR
Error from
pnacCombinedStMachTriggerFunc: "
DEBUG
couldn't find AP context for %s
interface
ERROR
received a pdu on %s
DEBUG
dot11Malloc failed
ERROR
pnacRecvMapi: protoType: %04x
pPhyPort->authToASSendRtn:%p
DEBUG
dot11Malloc failed
ERROR
port not found
DEBUG
eapolRecvKeyMsg: unknown
descType =%d
ERROR
Page 230 / 270
Unified Services Router
User Manual
228
from pnacRecvMapi: pkt body len = %d,
pktType = %d
DEBUG
eapolRecvKeyMsg: invalid descriptor
version
ERROR
from pnacPDUProcess: received
PNAC_EAP_PACKET
DEBUG
eapolRecvKeyMsg: incorrect
descriptor version
ERROR
from pnacPDUProcess: currentId = %d
DEBUG
eapolRecvKeyMsg: Ack must not be
set
ERROR
from pnacPDUProcess: code = %d,
identifier = %d, "
DEBUG
eapolRecvKeyMsg: MIC bit must be
set
ERROR
from pnacPDUProcess: setting rxResp
true
DEBUG
wpaAuthRecvPTKMsg2: unexpected
packet received
ERROR
from pnacPDUProcess: code = %d,
identifier = %d, "
DEBUG
wpaAuthRecvPTKMsg2: mic check
failed
ERROR
from pnacPDUProcess: received "
DEBUG
wpaAuthRecvPTKMsg2: rsn ie
mismatch
ERROR
from pnacPDUProcess: received "
DEBUG
wpaAuthRecvPTKMsg4: unexpected
packet received
ERROR
from pnacPDUProcess: received
PNAC_EAPOL_KEY_PACKET
DEBUG
wpaAuthRecvPTKMsg4:
keyDataLength not zero
ERROR
doing pnacTxCannedFail
DEBUG
wpaAuthRecvPTKMsg4: mic check
failed
ERROR
doing pnacTxCannedSuccess
DEBUG
wpaAuthRecvGTKMsg2: unexpected
packet received
ERROR
doing pnacTxReqId
DEBUG
secureBit not set in GTK Msg2
ERROR
doing pnacTxReq
DEBUG
wpaAuthRecvGTKMsg2:
keyDataLength not zero
ERROR
doing pnacTxStart
DEBUG
wpaAuthRecvGTKMsg2: mic check
failed
ERROR
doing pnacTxLogoff
DEBUG
wpaAuthRecvKeyReq: unexpected
packet received
ERROR
doing pnacTxRspId: 1st cond
DEBUG
wpaAuthRecvKeyReq: keyDataLength
not zero
ERROR
doing pnacTxRspId: entering 2nd cond
DEBUG
wpaAuthRecvKeyReq: mic check
failed
ERROR
from pnacTxRspId: code = %d, identifier
= %d, length = %d, "
DEBUG
invalid OUI %x %x %x
ERROR
doing pnacTxRspId: 2nd cond
DEBUG
(%s) invalid OUI %x %x %x
ERROR
doing pnacTxRspAuth: 1st cond
DEBUG
[%s:%d] Cipher in WPA IE : %x
ERROR
doing pnacTxRspAuth: 2nd cond
DEBUG
(%s) invalid OUI %x %x %x
ERROR
message for unknown port PAE
DEBUG
short WPA IE (length = %d) received
ERROR
from pnacACToSuppRecvRtn: calling
pnacEapPktRecord
DEBUG
PTK state machine in unknown state.
ERROR
from pnacEapPktRecord: code = %d,
identifier = %d, "
DEBUG
dot11InstallKeys failed
ERROR
from pnacEapPktRecord: received
success pkt
DEBUG
group state machine entered into
WPA_AUTH_GTK_INIT
ERROR
from pnacEapPktRecord: received failure
pkt
DEBUG
dot11Malloc failed
ERROR
from pnacEapPktRecord: received
request pkt
DEBUG
dot11Malloc failed
ERROR
unknown EAP-code
%d
DEBUG
dot11Malloc failed
ERROR
Authenticator[%d]:
DEBUG
aesWrap failed
ERROR
Auth PAE state = %s
DEBUG
unknown key descriptor version %d
ERROR
Auth Reauth state = %s
DEBUG
dot11Malloc failed
ERROR
Back auth state = %s
DEBUG
could not initialize AES128ECB
ERROR
Supplicant[%d]:
DEBUG
could not initialize AES-128-ECB
ERROR
Supp Pae state = %s
DEBUG
MD5 initialization failed
ERROR

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top