Page 36 / 84
Scroll up to view Page 31 - 35
36
D-Link DSL-500B User Manual
Web Configuration
IPoA Summary
This summary window allows you to confirm your IPoA
settings.
Click
Save/Reboot
to save your new IPoA settings and
restart the Router.
Page 37 / 84
37
D-Link DSL-500B User Manual
Web Configuration
Bridging
Step 1
In the PVC and its QoS configuration page, configure a PVC and
its QoS.
Step 2
In the Internet connection type and encapsulation type page, set
the
Connection Type
to
Bridging
and select the
Encapsulation
Mode
. Click
Next
to continue.
Step 3
The Bridging service configuration page will appear. Select the
Enable Bridge Service
check box and then enter the
Service
Name
.
Click
Next
to continue.
Step 4
Enter the Router's
IP Address
and
Subnet Mask
for your LAN,
and then click
Next
to continue.
Page 38 / 84
38
D-Link DSL-500B User Manual
Web Configuration
Bridging Summary
This summary window allows you to confirm your Bridge
settings.
Click
Save/Reboot
to save your new
Bridging
settings
and restart the Router.
Page 39 / 84
39
D-Link DSL-500B User Manual
Web Configuration
Click
Device Info
and you can view the following information.
Summary
±
WAN
±
Statistics
±
Route
±
ARP
±
DHCP
±
Summary of Device Information
Select
Summary
and the
Device Info
page will appear. This
displays the current status of your DSL connection, including the
software version, LAN IP address, and DNS server address.
LAN IP Address:
±
This is the management IP address.
Default Gateway:
±
In the bridging mode there is no gateway
address. In other modes, it is the address of the uplink
equipment, for example, PPPoE/PPPoA.
DNS Servers:
±
In the PPPoE and PPPoA mode, the Primary
and Secondary DNS Server addresses are obtained from the
uplink equipment. In the Bridging mode, there are no DNS
Server address and you can manually enter the information.
DSL Router Device Information
Page 40 / 84
40
D-Link DSL-500B User Manual
Web Configuration
WAN Interface Information
Select
Device Info >
WAN
. The
WAN Info
page will appear. It
displays the current status of your WAN connection, depending on
the selected connection type.
Statistics - LAN
Select
Device Info > Statistics > LAN.
The
Statistics-LAN
page
will appear. This page displays the Router’s LAN statistics.
Click
Reset Statistics
to refresh these statistics.
Statistics - WAN
Select
Device Info > Statistics > WAN.
The
Statistics-WAN
page
will appear. This page displays the Router’s WAN statistics.
Click
Reset Statistics
to refresh these statistics.
Statistics - ATM
Select
Device Info > Statistics > ATM.
The
Statistics-ATM
page
will appear. This page displays the Router’s ATM statistics.
Click
Reset
Statistics
to refresh these statistics.
19216811.live