Page 26 / 84
Scroll up to view Page 21 - 25
26
D-Link DSL-500B User Manual
Web Configuration
Step 4
To use IGMP service on PPPoA PVC, check the
Enable IGMP
Multicast
and the
Enable WAN Service
box and enter a
Service
Name
.
Note:
Do not modify the default MTU value setting unless your ISP
advises you to change it.
Click
Next
to continue.
Step 5
Enter the
IP Address
and
Subnet Mask
for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address, and
the Subnet Mask of the Router. You may also choose to change
the default value of the lease time.
Click
Next
to continue.
Page 27 / 84
27
D-Link DSL-500B User Manual
Web Configuration
PPPoA Summary
This summary window allows you to confirm your PPPoA
settings.
Click
Save/Reboot
to save your new PPP over ATM settings
and restart the Router.
Page 28 / 84
28
D-Link DSL-500B User Manual
Web Configuration
Step 1
In the PVC and its QoS configuration page, configure a PVC and
its QoS.
Step 2
In the Internet connection type and encapsulation type page, set
the
Connection Type
to
PPP over Ethernet (PPPoE)
and select
the
Encapsulation Mode
from the drop-down box and click
Next
to continue.
Step 3
The
PPP Username and Password
page will appear. Update the
following fields and click
Next
to continue.
Your ISP should provide you with the following information:
PPP Username
±
PPP Password
±
Authentication Method
±
You can also select another service function as follows:
Dial on demand (with idle timeout timer)
±
PPP IP extension
±
Use Static IP Address
±
Retry PPP password on authentication error
±
Enable PPP Debug Mode
±
PPP over Ethernet (PPPoE)
Page 29 / 84
29
D-Link DSL-500B User Manual
Web Configuration
Step 4
To use IGMP service on PPPoE pvc, check the
Enable IGMP
Multicast
and the
Enable WAN Service
box and enter a
Service
Name
.
Note:
Do not modify the default MTU value setting unless your ISP
advises you to change it.
Click
Next
to continue.
Step 5
Enter the
IP Address
and
Subnet Mask
for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address, and
the Subnet Mask of the Router. You may also choose to change
the default value of the lease time.
Click
Next
to continue.
Page 30 / 84
30
D-Link DSL-500B User Manual
Web Configuration
PPPoE Summary
This summary window allows you to confirm your PPPoE
settings.
Click
Save/Reboot
to save your new PPPoE settings and
restart the Router.
19216811.live