Page 31 / 84
Scroll up to view Page 26 - 30
31
D-Link DSL-500B User Manual
Web Configuration
Step 1
In the PVC and its QoS configuration page, configure a PVC and
its QoS.
Step 2
In the Internet connection type and encapsulation type page, set
the
Connection Type
to
MAC Encapsulation Routing (MER)
and
select the
Encapsulation Mode
from the drop-down box and click
Next
to continue.
Step 3
The WAN IP configuration page will appear. Select the service
function as follows:
Obtain an IP address automatically (use DHCP to obtain WAN
±
IP)
Use the following IP address (use static WAN IP)
±
Obtain default gateway automatically (use DHCP to obtain
±
gateway IP)
Use the following default gateway (use static gateway IP)
±
Obtain DNS server addresses automatically (use DHCP to
±
obtain DNS server IP)
Use the following DNS server addresses (use static DNS
±
server IP)
Click
Next
to continue.
MAC Encapsulation Routing (MER)
Page 32 / 84
32
D-Link DSL-500B User Manual
Web Configuration
Step 4
To use IGMP service on MER pvc, check the
Enable IGMP
Multicast
box.
In the MER mode, you can configure the following functions:
Enable NAT
±
Enable Firewall
±
Click
Next
to continue.
Step 5
Enter the
IP Address
and
Subnet Mask
for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address,
and the Subnet Mask. You may also choose to change the default
value of the lease time. Click
Next
to continue.
Page 33 / 84
33
D-Link DSL-500B User Manual
Web Configuration
MER Summary
This summary window allows you to confirm your MER
settings.
Click
Save/Reboot
to save your new MER settings and
restart the Router.
Page 34 / 84
34
D-Link DSL-500B User Manual
Web Configuration
Step 1
In the PVC and its QoS configuration page, configure a PVC and its
QoS.
Step 2
In the Internet connection type and encapsulation type page, set the
Connection Type
to IP over ATM (IPoA) and select the
Encapsulation Mode
from the drop-down box.
Click
Next
to continue.
Step 3
The
WAN IP configuration
page will appear.
You can select the following service functions:
Use the following IP address (Static WAN IP)
±
Use the following default gateway (Static gateway IP)
±
Use the following DNS server addresses (Static DNS server IP)
±
IP over ATM (IPoA)
Page 35 / 84
35
D-Link DSL-500B User Manual
Web Configuration
Step 4
Click
Next
and the IPoA IGMP and WAN function configuration
page will appear.
To use IGMP service on IPoA pvc, check the
Enable IGMP
Multicast
box.
In the IPoA mode, you can configure the following functions:
Enable NAT
±
Enable Firewall
±
Click
Next
to continue.
Step 5
Enter the
IP Address
and
Subnet Mask
for the LAN interface. In
addition, you can either enable or disable the DHCP server.
To enable the DHCP server, enter a start and end IP address,
and the Subnet Mask. You may also choose to change the default
value of the lease time.
Click
Next
to continue.
19216811.live