Page 41 / 128
Scroll up to view Page 36 - 40
D-Link DSL-2760U USER’S MANUAL
41
Step 5 – PPPoA
Obtain DNS:
Static DNS:
DNS Server Configuration:
Get DNS server information from the selected
WAN interface OR enter static DNS server IP
addresses. If only single PVC with IPoA or static
MER protocol is configured, you must enter static
DNS server IP addresses.
Select this option to enable automatic DNS
discovery from the WAN interface.
Select this option and enter the DNS IP addresses
if needed.
Click
Next
to continue the setup
Page 42 / 128
D-Link DSL-2760U USER’S MANUAL
42
Step 5 - PPPoA
WAN Setup – Summary:
Make sure that the settings below match the
settings provided by your ISP.
Click
Apply/Save
to have this interface to be
effective. Click
Back
to make any modifications.
Page 43 / 128
D-Link DSL-2760U USER’S MANUAL
43
IP over ATM
Step 1:
WAN Service Interface Configuration – IPoA:
Select a
Layer 2 Interface with IPoA settings
for
this service from the drop-down menu, and click
the
Next
button.
Step 2 - IPoA:
WAN Service configuration
The Service Description will be added
automatically.
Click the
Next
button.
Page 44 / 128
D-Link DSL-2760U USER’S MANUAL
44
Step 3 - IPoA:
WAN IP Address:
WAN Subnet Mask:
WAN IP Settings
Enter the WAN IP address used here.
Enter the subnet of the WAN IP address.
Click
Next
to continue the setup.
Step 4 – IPoA
Enable NAT:
Enable Firewall:
IGMP Multicast:
Network Address Translation Settings:
Tick this option to enable NAT for this connection.
Tick this option to enable firewall for this
connection.
Tick to enable IGMP Multicast Proxy.
Click
Next
to continue the setup.
Page 45 / 128
D-Link DSL-2760U USER’S MANUAL
45
Step 5 – IPoA
Routing -- Default Gateway
Select a preferred WAN interface as the system
default gateway.
Click
Next
to continue the setup
19216811.live