Page 31 / 128
Scroll up to view Page 26 - 30
D-Link DSL-2760U USER’S MANUAL
31
Step 4 – PPPoE
Obtain DNS:
Static DNS:
DNS Server Configuration:
Get DNS server information from the selected
WAN interface OR enter static DNS server IP
addresses. If only single PVC with IPoA or static
MER protocol is configured, you must enter static
DNS server IP addresses.
Select this option to enable automatic DNS
discovery from the WAN interface.
Select this option and enter the DNS IP addresses
if needed.
Click
Next
to continue the setup
Page 32 / 128
D-Link DSL-2760U USER’S MANUAL
32
Step 5 - PPPoE
WAN Setup – Summary:
Make sure that the settings below match the
settings provided by your ISP.
Click
Apply/Save
to have this interface to be
effective. Click
Back
to make any modifications.
IP over Ethernet (IPoE)
Step 1 - IPoE:
WAN Service Configuration
To setup an IPoE Interface select the
IP over
Ethernet
and click the
Next
button.
The Service Description will be added
automatically.
Click
Next
to continue the setup
Page 33 / 128
D-Link DSL-2760U USER’S MANUAL
33
Step 2 - IPoE
WAN IP Settings:
Enter information provided to you by your ISP to
configure the WAN IP settings.
Notice: If
Obtain an IP address automatically
is
chosen, DHCP will be enabled for PVC in MER
mode.
If
Use the following Static IP address
is chosen,
enter the WAN IP address, subnet mask and
interface gateway.
Click
Next
to continue the setup
Page 34 / 128
D-Link DSL-2760U USER’S MANUAL
34
Step 3 - IPoE
Network Address Translation Settings:
Network Address Translation (NAT) allows you to
share one Wide Area Network (WAN) IP address
for multiple computers on your Local Area
Network (LAN).
Select
Enable Firewall
to use the default firewall
options on this interface.
Select
Enable IGMP Multicast
to allow IGMP
Multicasting on this interface.
Click
Next
to continue the setup
Step 4 - IPoE
Routing – Default Gateway:
Select a preferred wan interface as the system
default gateway.
Click
Next
to continue the setup.
Page 35 / 128
D-Link DSL-2760U USER’S MANUAL
35
Step 5 – IPoE
Obtain DNS:
Static DNS:
DNS Server Configuration:
Get DNS server information from the selected
WAN interface OR enter static DNS server IP
addresses. If only single PVC with IPoA or static
MER protocol is configured, you must enter static
DNS server IP addresses.
Select this option to enable automatic DNS
discovery from the WAN interface.
Select this option and enter the DNS IP addresses
if needed.
Click
Next
to continue the setup
19216811.live