Wireless MAC filter is a security option that allows the user to block or allow certain MAC address to and from connecting to the Access Point wireless.
Mac Filter
Select the appropriate SSID from the drop-down list, and click the radio
buttons under
MAC Restrict Mode
.
When choosing
Allow
, all users will be blocked and only the allowing MAC
Addresses will have access to the wireless network.
When choosing
Block
, all users will be allowed and only the blocked MAC
Addresses will not have access to the wireless network.
Click the
Add
button to add a new MAC address for the MAC filter.
Adding a MAC Address
Enter the Wireless Client’s MAC Address.
Click
Apply/Save
to save and activate the change.
Page 87 / 128
D-Link DSL-2760U USER’S MANUAL
87
Viewing MAC Filter
The new rule should look like this.
Page 88 / 128
D-Link DSL-2760U USER’S MANUAL
88
Wireless Bridge
This page allows you to configure wireless bridge features of the wireless LAN interface. You can select Wireless Bridge (also known as Wireless Distribution
System) to disable access point functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and
wireless stations will be able to associate to the AP.
Access Point
There are three options to choose in the Bridge Restrict option:
Enabled
,
Enabled (Scan)
and
Disabled
.
Choose
Enabled
to allow the user entering the remote bridge’s MAC
address manually.
Choose
Enabled (Scan)
to allow the user selecting remote bridges from a
list of bridges automatically picked up.
Choose
Disabled
to disable the wireless bridge option.
Click
Apply/Save
to save the wireless bridge options.
Page 89 / 128
D-Link DSL-2760U USER’S MANUAL
89
Wireless Bridge
There are three options to choose in the Bridge Restrict option:
Enabled
,
Enabled (Scan)
and
Disabled
.
Choose
Enabled
to allow the user entering the remote bridge’s MAC
address manually.
Choose
Enabled (Scan)
to allow the user selecting remote bridges from a
list of bridges automatically picked up.
Choose
Disabled
to disable the wireless bridge option.
Click
Apply/Save
to save the wireless bridge options.
Page 90 / 128
D-Link DSL-2760U USER’S MANUAL
90
Advanced
This page allows you to configure some advanced features of the wireless LAN interface.
Advanced
The user can select a particular channel on which to operate, force the
transmission rate to a particular speed, set the fragmentation threshold, set
the RTS threshold, set the wakeup interval for clients in power-save mode,
set the beacon interval for the access point, set XPress mode and set
whether short or long preambles are used and more.
19216811.live