Select the appropriate upstream and downstream tones for your ADSL
Connection.
Click
Apply
to save and activate the change.
Page 72 / 128
D-Link DSL-2760U USER’S MANUAL
72
Universal Plug and Play (UPnP) Configuration
UPnP supports zero-configuration networking and automatic discovery for many types of networked devices. When enabled, it allows other devices that support
UPnP to dynamically join a network, obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and DNS
service can also be used if available on the network. UPnP also allows supported devices to leave a network automatically without adverse effects to the device
or other devices on the network. UPnP is a protocol supported by diverse networking media including Ethernet, Firewire, phone line, and power line networking.
UPnP Configuration
To enable UPnP for any available connection, tick the Enable or disable
UPnP protocol check box and click the
Apply/Save
button.
Print Server Settings
The router can be configured as a print server. Plug a USB printer into the USB port of the Router to share the printer within the local network. To access the
Print Server
window, click the
Print Server
button in the
Advanced Setup
directory.
Print Server Settings
Tick the
Enable on-board print server
check box. Enter the
Printer
Name
,
and
Make and model
to make the Router act as a print server.
Click the
Save/Apply
button to save the changes.
Note:
Refer to p.106 Add a Network Printer in Windows XP section to see
how to add a printer to the network.
Page 73 / 128
D-Link DSL-2760U USER’S MANUAL
73
Samba USB Storage
Samba is an Open Source/Free Software suite that provides USB storage device file sharing functions. The Router offers two USB ports to plug in USB storage
devices. You can share the files in the USB devices with multiple PCs or laptops within the local network.
To access the
Samba Config
window, click the
Samba Config
button in the
Advanced Setup
directory.
USB Storage
To activate the Samba function, tick the Enable Samba check box, and enter
the NetBIOS Name and Directory Name.
Click
Save
to save and activate the change.
You can also safely remove the USB storage device by clicking the
Unplug
USB
button before removing the USB storage device.
Page 74 / 128
D-Link DSL-2760U USER’S MANUAL
74
PPTP
To access the
PPTP Setting
window, click the
PPTP
button in the
Advanced Setup
directory.
To set up Point-to-Point Tunnel Protocol, tick the Enable check box, enter the
appropriate information in the fields offered, and then click the
Save/Apply
button when you are finished.
Page 75 / 128
D-Link DSL-2760U USER’S MANUAL
75
Interface Grouping
Interface Grouping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network.
Interface Grouping
To support this feature, you must create mapping groups with appropriate
LAN and WAN interfaces using the Add button. The Remove button will
remove the grouping and add the ungrouped interfaces to the Default group.
19216811.live